CFRP strengthened butt-welded very high strength (VHS) circular steel tubes

Zhao, 2000, Section capacity of very high strength (VHS) circular tubes under compression, Thin-Walled Structures, 37, 223, 10.1016/S0263-8231(00)00017-3

Jiao, 2001, Material ductility of very high strength (VHS) circular steel tubes in tension, Thin-Walled Structures, 39, 887, 10.1016/S0263-8231(01)00039-8

Jiao, 2002, Imperfection, residual stress and yield slenderness limit of very high strength (VHS) circular steel tubes, Journal of Constructional Steel Research, 59, 233, 10.1016/S0143-974X(02)00025-1

Jiao H. Zhao XL. Section slenderness limits of very high strength circular steel tubes in bending. Thin-Walled Structures 2004. Accepted for publication.

Jiao, 2001, Strength of Butt Welds and Transverse Fillet Welds in Very High Strength (VHS) Circular Steel Tubes, 775

Ling, 2002, Test and design of longitudinal fillet welds in very high strength (VHS) steel circular tubes, 245

Cullison, 1995, Know your high-strength steel before welding, Welding Journal, 74

Martukanitz, 2000, Loss of strength within the heat affected zone of Al–Cu and Al–Cu–Li alloys, Materials Science Forum, 331, 1291, 10.4028/www.scientific.net/MSF.331-337.1291

Akselsen, 1989, Assessment and predictions of HAZ tensile properties of high-strength steels, Welding Journal, 68, 356s

Jiao, 2002, Strengthening tests of butt-welded very high strength (VHS) circular steel tubes, 10.2749/222137802796337323

Teng, 2002

Tumialan, 2002, FRP composites for strengthening civil infrastructure around the world, SAMPE Journal, 38, 9

Cederquist, 1999, Repairing America’s deteriorating bridges, Materials Performance, 38, 20

Moy, 2001, FRP composites: life extension and strengthening of metallic structures, 64

Moriarty, 1998, The use of carbon fiber composites in the London underground limited civil infrastructure rehabilitation program, SAMPE Journal, 34, 23

Sen, 2001, Strengthening steel bridge sections using CFRP laminates, Composites Part B: Engineering, 32, 309, 10.1016/S1359-8368(01)00006-3

Miller, 2001, Strengthening of a steel bridge girder using CFRP plates, Journal of Bridge Engineering, 6, 514, 10.1061/(ASCE)1084-0702(2001)6:6(514)

Tavakkolizadeh, 2003, Strengthening of steel-concrete composite girders using carbon fiber reinforced polymers sheets, Journal of Structural Engineering, ASCE, 129, 30, 10.1061/(ASCE)0733-9445(2003)129:1(30)

Tavakkolizadeh, 2003, Fatigue strength of steel girders strengthened with carbon fiber reinforced polymer patch, Journal of Structural Engineering, ASCE, 129, 186, 10.1061/(ASCE)0733-9445(2003)129:2(186)

Tani, 2000, Experimental study on seismic retrofitting method of steel bridge piers by using carbon fiber sheets, 437

Bassetti, 1998, Fatigue resistance and repairs of riveted bridge members, 535

Jiao H, Zhao XL. Tension capacity of very high strength (VHS) circular steel tubes after welding. Advances in Structural Engineering—An International Journal, 2004, accepted for publication.

ASTM. Standard test method for lap shear adhesion for fiber reinforced plastic (FRP) bonding. ASTM Designation D 5868-01, 2001. 15.06: p. 518–9.

ASTM. Standard guide for use of adhesive-bonded single lap-joint specimen test results. ASTM Designation D 4896-01, 1999. 15.06: p. 424–9.

SAA. Structural steel welding—welding of steel structures subject to high levels of fatigue loading. Australian Standard AS/NZS 1554.5. Sydney: Standard Australia; 1995.

Ciba Adhesives. Surface preparation and pretreatment of structural adhesives. Section III of manuals-surface preparation and pretreatments, working directions for optimum adhesion between structural materials with Araldite adhesives, 2000, p. 136–46.

ASTM, Standard practice for classifying failure modes in fiber-reinforced plastic (FRP) joints. ASTM Designation D 5573, 1999. 15.06: p. 476–8.