CFRP manufacturing method using electrodeposition resin molding for curvilinear fiber arrangements

Soutis, 2005, Carbon fiber reinforced plastics in aircraft construction, Mater Sci Eng, A, 412, 171, 10.1016/j.msea.2005.08.064 Friedrich, 2013, Manufacturing aspects of advanced polymer composites for automotive applications, Appl Compos Mater, 20, 107, 10.1007/s10443-012-9258-7 Fu, 1996, Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers, Compos Sci Technol, 56, 1179, 10.1016/S0266-3538(96)00072-3 Vieille, 2013, About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic-and thermosetting-composites: a comparative study, Compos Struct, 101, 9, 10.1016/j.compstruct.2013.01.025 Matsuzaki, 2016, Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation, Sci Reports, 6, 23058, 10.1038/srep23058 Tian, 2016, Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites, Compos A Appl Sci Manuf, 88, 198, 10.1016/j.compositesa.2016.05.032 Murakami, 2002, History and principle for electrodeposition coating (in Japanese), J Surf Finish Soc Jpn, 53, 288, 10.4139/sfj.53.288 Sakamoto, 2005, Environment friendly electrolyzed activate deposition material with high electric insulation (in Japanese), J Oil Chem Soc, J Oleo Sci, 5, 489 Brylawski, 1996, Ultralight-hybrid vehicle design: overcoming the barriers to using advanced composites in the automotive industry, Mater Process Challenges: Aging Syst, Affordability, Alternative Appl, 41, 1432 Zushi, 2003, Life cycle assessment and long term CO2 reduction estimation of ultra lightweight vehicles using CFRP, Key Eng Mater, 243–244, 45, 10.4028/www.scientific.net/KEM.243-244.45 Matsuzaki, 2014, In situ void content measurement during resin transfer molding (in Japanese), Jpn Soc Compos Mater, J Compos Mater, 40, 25, 10.6089/jscm.40.25 Shimada, 2016, Numerical simulation of molding-defect formation during resin transfer molding, J Adv Compos Mater, 25, 17, 10.1080/09243046.2016.1181417 Okabe, 2017, Multi-objective optimization for resin transfer molding process, Compos A Appl Sci Manuf, 92, 1, 10.1016/j.compositesa.2016.09.023 Hyer M, Charette R. Use of curvilinear fiber format in composite structure design. AIAA J 1991;29(6);1011–5. Lemaire, 2015, Optimization of composite structures with curved fiber trajectories, Compos Struct, 131, 895, 10.1016/j.compstruct.2015.06.040 Honda, 2012, Natural frequencies and vibration modes of laminated composite plates reinforced with arbitrary curvilinear fiber shape paths, J Sound Vib, 331, 180, 10.1016/j.jsv.2011.08.019 Honda, 2013, Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-IF, Compos B Eng, 45, 1071, 10.1016/j.compositesb.2012.07.056 Malakhov, 2016, Design of composite structures reinforced curvilinear fibres using FEM, Compos A Appl Sci Manuf, 87, 23, 10.1016/j.compositesa.2016.04.005 Tosh, 2000, On the design, manufacture and testing of trajectorial fibre steering for carbon fibre composite laminates, Compos A Appl Sci Manuf, 31, 1047, 10.1016/S1359-835X(00)00063-4 Koricho, 2015, Innovative tailored fiber placement technique for enhanced damage resistance in notched composite laminate, Compos Struct, 120, 378, 10.1016/j.compstruct.2014.10.016 Katagiri K, Sasaki K, Yamaguchi S, Kakitsuji A. The manufacturing method of CFRP using electrodeposition (in Japanese). Proc 24th JSME Mater Process; 2016. p. 122. Gürdal Z, Haftka RT, Hajela P. Design and optimization of laminated composite materials. A Wiley-Interscience Publication; 1998. Kulkarni R, Ochoa O. Transverse and longitudinal CTE measurements of carbon fibers and their impact on interfacial residual stresses in composites. J Compos Mater 2006;40(8):733–54. Kitselisa, 2016, The effect of resonance on the void content in CFRP tubes, Compos B Eng, 106, 164, 10.1016/j.compositesb.2016.09.019 Aurrekoetxea, 2012, Impact behavior of carbon fiber/epoxy composite manufactured by vacuum-assisted compression resin transfer molding, J Compos Mater, 46, 43, 10.1177/0021998311401938 Kappel, 2013, Process distortions in prepreg manufacturing – an experimental study on CFRP L-profiles, Compos Struct, 106, 615, 10.1016/j.compstruct.2013.07.020 Kappela, 2013, Manufacturing distortions of a CFRP box-structure: a semi-numerical prediction approach, Compos A Appl Sci Manuf, 51, 89, 10.1016/j.compositesa.2013.04.003 Kappel, 2015, Predicting process-induced distortions in composite manufacturing – a pheno-numerical simulation strategy, Compos Struct, 120, 98, 10.1016/j.compstruct.2014.09.069 Hayman, 2007, The effect of face sheet wrinkle defects on the strength of FRP sandwich structures, J Sandwich Struct Mater, 9, 377, 10.1177/1099636207069250 Hadi, 2000, Development of Benson–Mayers theory on the wrinkling of anisotropic sandwich panels, Compos Struct, 49, 425, 10.1016/S0263-8223(00)00077-5