Boron-based composite energetic materials (B-CEMs): Preparation, combustion and applications

Pang, 2019 Pang, 2009, Application progress of metal fuels in solid propellants, Chem Propellant Polym Mater, 7, 1 Brown, 1994, Kinetic-model for hydrocarbon-assisted particulate boron combustion, Int J Chem Kinet, 26, 319, 10.1002/kin.550260302 Brown, 1991, Kinetics of high temperature, hydrocarbon assisted boron combustion, Abstr Pap Am Chem Soc, 202, 142 Gany, 1986, Combustion studies of metallized fuels for solid-fuel ramjets, J Propul Power, 2, 423, 10.2514/3.22924 Sundaram, 2017, Metal-based nanoenergetic materials: synthesis, properties, and applications, Prog Energy Combust Sci, 61, 293, 10.1016/j.pecs.2017.02.002 Dreizin, 2009, Metal-based reactive nanomaterials, Prog Energy Combust Sci, 35, 141, 10.1016/j.pecs.2008.09.001 Kuo, 1993 Ojha, 2018, Boron for liquid fuel engines - a review on synthesis, dispersion stability in liquid fuel, and combustion aspects, Prog Aerosp Sci, 103, 1 Pang, 2009, Physicochemical properties of boron powder and its application in fuel-rich solid propellants, Winged Missile, 10, 53 Pang, 2016 Pang W. Study of fuel-rich propellants with high mass fraction of boron particles PhD Thesis. Xi'an: Xi'an Modern Chemistry Research Institute; 2011. Pang, 2016 Li, 1995, Solid fuels with boron powder, Chin J Energ Mater, 3, 1 Zheng J. Study on high-energy boron-based fuel-rich propellant technology PhD Thesis. Beijing: Beijing Institute of Technology; 2004. Fawls C.J., Fields J.P., Wagaman KL. Propellants and explosives with flouroorganic additives to improve energy release efficiency, United States Patent 6843868, 2005. Yetter, 1998, Effect of fluorine on the gasification rate of liquid boron oxide droplets, Combust Flame, 112, 387, 10.1016/S0010-2180(97)00123-5 Xu, 2015, Effect of fluorine-binder on the under-water explosion energy of boron-containing explosive, Initiat Pyrotech, 38 Zhou, 1998, Effect of fluorine on the combustion of ‘clean’ surface boron particles, Combust Flame, 112, 507, 10.1016/S0010-2180(97)00129-6 Krier, 1994 Valluri, 2019, Boron-metal fluoride reactive composites: preparation and reactions leading to their ignition, J Propul Power, 35, 802, 10.2514/1.B37306 Pivkina, 2018, Comparative analysis of boron powders obtained by various methods. I. Microstructure and oxidation parameters during heating, Combust Explos Shock Waves, 54, 450, 10.1134/S0010508218040093 Zhang, 2005, Surface coating of superfine boron particles with lithium fluoride, Chin J Explos Propellants, 28, 8 Kuo, 2002, 427 Krier, 1996, Shock initiation of crystalline boron in oxygen and fluorine compounds, J Propul Power, 12, 672, 10.2514/3.24088 Pivkina, 2020, Prospects of using boron powders as fuel. II. Influence of aluminum and magnesium additives and their compounds on the thermal behavior of boron oxide, Combust Explos Shock Waves, 56, 148, 10.1134/S0010508220020057 Liu, 2014, Effect of magnesium on the burning characteristics of boron particles, Acta Astronaut, 96, 89, 10.1016/j.actaastro.2013.11.039 Rosenband, 1995, Ignition of boron particles coated by a thin titanium film, J Propul Power, 11, 1125, 10.2514/3.23950 Badiola, 2013, Combustion of micron-sized particles of titanium and zirconium, Proc Combust Inst, 34, 2237, 10.1016/j.proci.2012.05.089 Zheng, 2003, Study on process deterioration mechanism of boron based HTPB fuel-rich propellant, J Propuls Technol, 24, 282 Liu, 2017, Effect of purity and surface modification on stability and oxidation kinetics of boron powders, Thermochim Acta, 652, 17, 10.1016/j.tca.2017.03.007 Yu, 2009, Coating of high purity boron particle and its application in high-energy fuel-rich propellants, Chem Propellants Polym Mater, 7, 6 Kuo, 1984, Fundamentals of solid propellant combustion, Prog Aeronaut Astronaut, 90 Xu, 2007, Purification of amorphous boron powder with solvents, Chin J Explos Propellants, 30, 8 Liang, 2019, Study on high temperature purification of amorphous boron powder for solid propellant, Initiat Pyrotech, 3, 26 Guo Y. Study on preparation, combustion property and application of borides and coated boron PhD Thesis. Changsha: National University of Defense Technology; 2014. Chen, 2016, Research progress in coating mechanism and technology of boron particles, Chin J Explos Propellants, 39, 13 Pang W. Agglomeration technique of boron and its application to fuel-rich propellants MS Thesis. Xi'an: Northwestern Polytechnical University; 2006. Meerov, 2015, Boron particles agglomeration and slag formation during combustion of energetic condensed systems, Phys Procedia, 72, 85, 10.1016/j.phpro.2015.09.024 Hu, 2013, Research on properties of boron agglomerated with energetic binder, J Solid Rocket Technol, 36, 506 Pang, 2011, Application of amorphous boron granulated with hydroxylTerminated polybutadiene in fuel-rich solid propellant, Propell Explos Pyrot, 36, 360, 10.1002/prep.200900112 Glotov, 2004, Combustion characteristics of propellants containing aluminum-boron mechanical alloy Zhang, 2013, Enhanced reactivity of boron, through adding nano-aluminum and wet ball milling, Appl Surf Sci, 286, 91, 10.1016/j.apsusc.2013.09.026 Sandall, 2017, A study of solid ramjet fuel containing boron-magnesium mixtures, Propuls Power Res, 6, 243, 10.1016/j.jppr.2017.11.004 Schoenitz, 2005, Fully dense nano-composite powders prepared by arrested reactive milling, Proc Combust Inst, 30, 2071, 10.1016/j.proci.2004.08.134 Suryanarayana, 2001, Mechanical alloying and milling, Prog Mater Sci, 46, 1, 10.1016/S0079-6425(99)00010-9 Ang, 2012 Pontes L., Ricardo J. Synthesis of metal-polymer nanocomposites for fuel applications PhD thesis, Ecole Polytechnique, Montreal, Canada, 2015. Du M. Surface functionalization of boron nanoparticles and their dispersibility in liquid hydrocarbon fuels PhD Thesis. Zhejiang: Zhejiang University; 2017. Pang, 2010, Studies on the modified surface of amorphous boron powder by different chemical origins, J Solid Rocket Technol, 33, 196 Chintersingh, 2016, Oxidation kinetics and combustion of boron particles with modified surface, Combust Flame, 173, 288, 10.1016/j.combustflame.2016.08.027 Yoshio, 1992, Urethane reaction mechanism on the amorphous boron surface in GAP propellant, Propell Explos Pyrot, 17, 278 Karmakar, 2013, Effects of rare-earth oxide catalysts on the ignition and combustion characteristics of boron nanoparticles, Combust Flame, 160, 3004, 10.1016/j.combustflame.2013.06.030 Zhang, 2014, Study on electroless nickel plating on agglomerated boron powder, Nonferrous Met Eng, 4, 17 Pang, 2013, Characteristics of B/Mg compounds and the effect on the burning rate properties for fuel-rich propellant, J Solid Rocket Technol, 36, 363 Liu, 2015, Ignition and combustion characteristics of compound of magnesium and boron, J Therm Anal Calorin, 121, 1205, 10.1007/s10973-015-4653-6 Xi, 2014, Effect of metal hydrides on the burning characteristics of boron, Thermochim Acta, 597, 58, 10.1016/j.tca.2014.10.017 Gao D. Primary combustion performance of boron-based fuel-rich propellant PhD Thesis. Changsha: National University of Defense Technology; 2009. Liang, 2019, Ignition and heterogeneous combustion of aluminum boride and boron-aluminum blend, Aerosp Sci Technol, 84, 1081, 10.1016/j.ast.2018.11.046 Song, 2017, Preparation and characterization of metalized explosive containing B and Al powder, Chin J Energ Mater, 23, 384 Pang, 2013, Effects of different metal fuels on the characteristics of HTPB-based fuel-rich solid propellants, Propell Explos Pyrot, 38, 482, 10.1002/prep.201200182 Wainwright, 2021, Comparing the ignition and combustion characteristics of ball-milled Al-based composites with Ti, Zr, and Mg additives, J Energ Mater Hastings, 2020, Zirconium-boron reactive composite powders prepared by arrested reactive milling, J Energ Mater, 38, 142, 10.1080/07370652.2019.1679279 Xu, 2012, Development status of fuel-rich propellant for solid fuel ramjet, Winged Missile, 8, 69 Vummidi, 2010, Characterization of fine aluminum powder coated with nickel as a potential fuel additive, J Propul Power, 26, 454, 10.2514/1.47092 Zhu, 2008, Coating different thickness nickel-boron nanolayers onto boron carbide particles, Surf Coat Technol, 202, 2927, 10.1016/j.surfcoat.2007.10.021 Athawale, 2004, Burning rate studies of metal powder (Ti, Ni)-based fuel-rich propellants, J Energ Mater, 22, 55, 10.1080/07370650490492770 Chen, 2013, Preparation and characterization of Ni/B micro-nano composite particles, Rare Met Mater Eng, 42, 2376 Schoenitz, 2003, Constant volume explosions of aerosols of metallic mechanical alloys and powder blends, J Propul Power, 19, 405, 10.2514/2.6144 Deshmukh, 2020, Room temperature electroless Ni-coating on boron particles: physicochemical and oxidation-resistance properties, J Ind Eng Chem, 91, 252, 10.1016/j.jiec.2020.08.007 Leibu, 1995, The boron/titanium composite particle: a novel approach for ignition enhancement, AIAA, 95 Hastings, 2022, Titanium-boron reactive composite powders with variable morphology prepared by arrested reactive milling, Fuel, 310 Yang H. Preparation and reactivity of highly active boron composites PhD Thesis. Nanjing: Nanjing University of Science and Technology; 2017. Huang, 2008, Oxidation behavior of TiB2 during ball-milling, J Chin Ceram Soc, 36, 17 Chintersingh, 2021, Transition metal catalysts for boron combustion, Combust Sci Technol, 193, 1400, 10.1080/00102202.2019.1696317 Chintersingh, 2021, Effect of purity, surface modification and iron coating on ignition and combustion of boron in air, Combust Sci Technol, 193, 1567, 10.1080/00102202.2019.1702649 Chintersingh, 2019, Boron doped with iron: Preparation and combustion in air, Combust Flame, 200, 286, 10.1016/j.combustflame.2018.11.031 Zhao, 2020 Li, 2009, Study on thermokinetics analysis of B/CuO delay composition, Initiat Pyrotech, 1, 22 Wang, 2018, Boron ignition and combustion with doped δ-Bi2O3: bond energy/oxygen vacancy relationships, Combust Flame, 197, 127, 10.1016/j.combustflame.2018.07.015 Liu, 2015, Preparation and properties of boron-based nano-B/NiO thermite, Propell Explos Pyrot, 40, 873, 10.1002/prep.201400308 Liu, 2016, Preparation and properties of boron-based nano-B/CuO thermite, 95 Liu, 2018, Preparation of B/CuO composite fuel and its influence on Mg/PTFE fuel-rich propellant, Explos Mater, 47, 9 Shen, 2014, Preparation of Al/B/Fe2O3 nano-composite energetic materials by high-energy ball milling, J Solid Rocket Technol, 37, 233 Wang, 2015, Preparation of RDX/B/Fe2O3 nano-composite energetic material with gel-template method, Chin J Energ Mater, 23, 410 Yang, 2017, Preparation of B/Fe2O3/NC composite and its effect on properties of HTPB/AP propellant, Chin J Explos Propellants, 40, 88 Pang, 2013, Effects of different metal fuels on the characteristics for HTPB-based fuel rich solid propellants, Propell Explos Pyrot, 38, 852, 10.1002/prep.201200182 Xu, 2019, Liquid phase in-situ synthesis of LiF coated boron powder composite and performance study, Def Technol, 15, 1 Li, 1991, Optical measurement of size histories of boron particles in ignition and combustion stage, Combust Sci Technol, 77, 149, 10.1080/00102209108951724 Zhang, 2005, Research on the surface coating of superfine boron particles with PBT, Chin J Energ Mater, 13, 185 Wang, 2017, Combustion of boron and boron-containing reactive composites in laminar and turbulent air flows, Combust Sci Technol, 189, 683, 10.1080/00102202.2016.1246441 Zhang, 2011, Research on the coated and agglomerated boron powder by spray drying method, Min Metall, 20, 44 Zhang, 2007, Research on the coating of superfine boron particles with HTPB, Chem Ind Eng Prog, 26, 1641 Yuan, 2010, Preparation and characterization of poly(styrene-Co-maleic anhydride)-modified boron particles, J Dispers Sci Technol, 31, 327, 10.1080/01932690903167699 Shin, 2016, Combustion of boron particles coated with an energetic polymer material, Korean J Chem Eng, 33, 3016, 10.1007/s11814-016-0173-8 Gao, 2007, Effect of coating and agglomerating on combustion of boron, Chin J Energ Mater, 15, 378 Liang, 2016, Combustion characteristics and propulsive performance of boron/ammonium perchlorate mixtures in microtubes, J Energ Mater, 34, 297, 10.1080/07370652.2015.1066464 Wang, 2003, Effect of different granularity AP and boron coating with AP on combustion of boron, Theory Pract Energ Mater, 5, 522 Zhang, 2007, Improvement for AP coating superfine boron powder, Chin J Energ Mater, 15, 382 Wei, 2003, Effect of boron coated with AP on the rheological properties of slurry of fuel-rich propellant, J Propuls Technol, 24, 467 Pang, 2006, Coating of boron particles and combustion residue analysis of boron-based solid propellants, J Solid Rocket Technol, 29, 204 Gao, 2015, Preparation and characterization of boron coated with double salt, J Sichuan Ordnance, 9, 142 Zhao, 1998, The coating process of boron particles and its effect on the surface and combustion characteristics of boron, J Solid Rocket Technol, 21, 35 Ulas, 2001, Ignition and combustion of boron particles in fluorine-containing environments, Combust Flame, 127, 1935, 10.1016/S0010-2180(01)00299-1 Xu, 2008, Rheological characteristic of agglomerated boron powder with HTPB mixture, J Propuls Technol, 29, 631 Liu, 1991, Effect of boron particle surface coating on combustion of solid propellants for ducted rockets, Propell Explos Pyrot, 16, 156, 10.1002/prep.19910160403 Valluri, 2020, Effect of boron content in B·BiF3 and B·Bi composites on their ignition, Combust Flame, 215, 78, 10.1016/j.combustflame.2020.01.026 Gao, 2012, Preparation of dopamine-modified boron nanoparticles, J Mater Chem, 22, 877, 10.1039/C1JM12655E Perez, 2015, Binding of alkenes and ionic liquids to B-H-functionalized boron nanoparticles: creation of particles with controlled dispersibility and minimal surface oxidation, ACS Appl Mater Interfaces, 7, 9991, 10.1021/acsami.5b02366 Perez, 2013, Functionalization and passivation of boron nanoparticles with a hypergolic ionic liquid, J Propul Power, 29, 489, 10.2514/1.B34724 Perez, 2013, Exploring the structure of nitrogen-rich ionic liquids and their binding to the surface of oxide free boron nanoparticles, J Phys Chem C, 117, 5693, 10.1021/jp3100409 Fareghi-Alamdari, 2016, Surface passivation of bare boron nanoparticles using new dicyanamide-based dicationic ionic liquid, Energy Fuels, 30, 551, 10.1021/acs.energyfuels.5b01556 Pang, 2008, Agglomerated technology for amorphous boron powder, Chin J Explos Propellants, 31, 46 Pang, 2009, Improvement of a new method for HTPB agglomeration of amorphous boron powder, J Northwest Univ (Nat Sci Netw Ed), 7, 1 Pang, 2008, Study on the agglomeration of nanoparticles in the preparation process, Chem Ind Eng Technol, 29, 19 Fan, 2010, Optimization of preparation process for spherical agglomerated boron particles, Chin J Explos Propellants, 33, 64 Pang, 2013, Surface and interface actions of agglomerated boron particles with different binders, Chin J Explos Propellants, 36, 83 Pang, 2011, Fractal dimension calculation on roughness and size distribution of agglomerated boron particles and its relationship with rheological properties for fuel-rich propellant, Chin J Energ Mater, 19, 46 Mursalat, 2021, Spherical boron powders prepared by mechanical milling in immiscible liquids, Powder Technol, 388, 41, 10.1016/j.powtec.2021.04.063 Hong Y. The preparation and properties of boron/nitrocellulose composite fibers PhD Thesis. Nanjing: Nanjing University of Science and Technology; 2016. Pang, 2010, Bulk density of different sizes of agglomerated boron particles, Chin J Energ Mater, 18, 304 Zhang, 2013, Effect of particle size grading on the adding property of agglomerated boron powder, Min Metall, 22, 67 Tang, 2005, Effect of modified boron powder on propellant processing characteristics, Chin J Energ Mater, 13, 69 Hu, 2014, Effect of boron powder and agglomerated boron particles on the rheological property of HTPB, J Solid Rocket Technol, 37, 369 Pan K. Preparation of amorphous boron, evaluation and application of agglomerated boron PhD Thesis. Changsha: National University of Defense Technology; 2016. Jiang, 2021, Enhancing mechanical and combustion performance of boron/polymer composites via boron particle functionalization, ACS Appl Mater Interfaces, 13, 28908, 10.1021/acsami.1c06727 DeLuca, 2005, Burning of nano-aluminized composite rocket propellants, Combust Explos Shock Waves, 41, 680, 10.1007/s10573-005-0080-5 Pang, 2005, Study on the application of nanotechnology in solid propellant in twenty-first century, Nanotechnology, 2, 9 Gromov, 2014 Zarko, 2016 Kumar, 2019, Combustion performance studies of aluminum and boron based composite solid propellants in sub-atmospheric pressure, Propuls Power Res, 8, 329, 10.1016/j.jppr.2019.09.001 Risha, 2003, Nano-sized aluminum- and boron-based solid-fuel characterization in a hybrid rocket engine Yetter, 2009, Metal particle combustion and nanotechnology, Proc Combust Inst, 32, 1819, 10.1016/j.proci.2008.08.013 Agarwal, 2021, Surface-functionalized boron nanoparticles with reduced oxide content by nonthermal plasma processing for nanoenergetic applications, ACS Appl Mater Interfaces, 13, 6844, 10.1021/acsami.0c20825 Gash, 2005, Nanoparticles, 238 Pang, 2020, Al-based nano-sized composite energetic materials (nano-CEMs): preparation, characterization, and performance, Nanomaterials, 10, 1039, 10.3390/nano10061039 Rossi, 2015 Hong, 2016, Modification of boron nanoparticles and its effect on boron/nitrocellulose nanofibers, Chin J Explos Propellants, 39, 27 Yan S.. Modification of micro-, nano-scale aluminum and boron burners and their application in energetic materials PhD Thesis. Nanjing: Nanjing University of Science and Technology; 2013. Lightstone, 2012, Development of metal cluster-based energetic materials at NSWC-IHD, AIP Conf Proc, 1426, 611, 10.1063/1.3686353 Xiao Y. Ignition and combustion of boron particles and its enhancement methods PhD Thesis. Changsha: National University of Defense Technology; 2013. Rosenband, 1998, Magnesium and boron combustion in hot steam atmosphere, Def Sci J, 48, 309, 10.14429/dsj.48.3953 Nikol'skii, 1992, Combustion of boron-containing condensed systems, Combust Explos Shock Waves, 28, 45, 10.1007/BF00754966 Wang, 2004, Effect of AP particle size and coating on combustion of boron, J Solid Rocket Technol, 27, 50 Pang, 2010, Rheological properties of agglomerated boron particles in the HTPB-based fuel-rich propellant, Chin J Explos Propellants, 33, 84 Li, 1997, The effects of boron particle surface coating on the thermal decomposition of fuel-rich propellant, J Chem Eng Fire Chem Div, 1 Xu, 2007, Effect of neutralized boron powder on rheological characteristic of B/HTPB, Chin J Energ Mater, 15, 341 Liu L. Factors affecting the primary combustion of boron-based fuel-rich propellants and the combustion performance of primary products PhD Thesis. Xi'an: Northwestern Polytechnical University; 2015. Sun, 2018, Preparation and characterization of sintered B/MgB2 as heat release material, J Alloys Compd, 759, 100, 10.1016/j.jallcom.2018.05.038 Sun, 2020, Ignition and combustion behavior of sintered-B/MgB2 combined with KNO3, Propell Explos Pyrot, 45, 997, 10.1002/prep.201900367 Valluri, 2020, Bismuth fluoride-coated boron powders as enhanced fuels, Combust Flame, 221, 1, 10.1016/j.combustflame.2020.07.023 Liu, 2017, Composition and characteristics of primary combustion products of boron-based propellants, Combust Explos Shock Waves, 53, 55, 10.1134/S0010508217010099 Liu, 2012, Research on the combustion heat testing of boron with double base propellant as combustion improver, J Solid Rocket Technol, 35, 513 Keerthi, 2020, Combustion characteristics of fluoropolymer coated boron powders, Combust Sci Technol Cheng, 2020, Preparation and combustion performance of B/PVDF/Al composite microspheres, Propell Explos Pyrot, 45, 647, 10.1002/prep.201900232 Gany, 2014, Thermodynamic limitation on boron energy realization in ramjet propulsion, Acta Astronaut, 98, 128, 10.1016/j.actaastro.2014.01.023 Valluri, 2021, Ignition mechanisms of reactive nanocomposite powders combining Al, B, and Si as fuels with metal fluorides as oxidizers, Combust Sci Technol Glotov, 2017, Combustion efficiency of boron containing fuels in composite propellants Zhao, 1999, Ignition and combustion characteristics of boron particles, J Solid Rocket Technol, 22, 37 Puduppakkam, 2005, Combustion modeling of glycidyl azide polymer with detailed kinetics, Combust Sci Technol, 177, 1661, 10.1080/00102200590956740 Qin, 2014, Ignition temperature of metal fuel in different atmosphere, Initiat Pyrotech, 4, 24 Xi, 2013, Effects of coating agents on the ignition and combustion of boron particles, J Solid Rocket Technol, 36, 654 Liang, 2017, Ignition and combustion characteristics of amorphous boron and coated boron particles in oxygen jet, Combust Flame, 185, 292, 10.1016/j.combustflame.2017.07.030 Yeh, 1996, Ignition and combustion of boron particles, Prog Energy Combust Sci, 22, 511, 10.1016/S0360-1285(96)00012-3 Jain, 2010, Studies on the ignition behavior of boron powder, Thermochim Acta, 500, 63, 10.1016/j.tca.2009.12.011 Dreizin, 1999, Phase changes in boron ignition and combustion, Combust Flame, 119, 272, 10.1016/S0010-2180(99)00066-8 Valluri, 2019, Combustion of composites of boron with bismuth and cobalt fluorides in different environments, Combust Sci Technol Wang, 2016, Ignition and combustion of boron-based Al·B·I2 and Mg·B·I2 composites, Chem Eng J, 293, 112, 10.1016/j.cej.2016.02.071 Liu, 2017, Boron-based reactive materials with high concentrations of iodine as a biocidal additive, Chem Eng J, 325, 495, 10.1016/j.cej.2017.05.100 Wang, 2017, Nanocomposite thermites with calcium iodate oxidizer, Propell Explos Pyrot, 42, 284, 10.1002/prep.201600213 Chintersingh, 2016, Combustion of boron particles in products of an air-acetylene flame, Combust Flame, 172, 194, 10.1016/j.combustflame.2016.07.014 Liang, 2014, Effect of carbon on the ignition and combustion characteristics of amorphous boron particles, Chin J Energ Mater, 22, 386 Ao, 2013, Effects of particle size and crystalline form on the ignition and combustion characteristics of boron particles, Chin J Energ Mater, 21, 800 Natan, 1993, Effects of bypass air on boron combustion in solid fuel ramjets, J Propul Power, 9, 155, 10.2514/3.11499 Fan, 2008, Ignition characteristics of boron-based fuel-rich propellants, J Propuls Technol, 29, 102 Xi, 2013, Progress in methods of promoting the ignition and combustion of boron particles, Chin J Energ Mater, 21, 533 Liu, 2014, Boron particle combustion in solid rocket ramjets, J Aerosp Eng, 28 Yetter, 2001, Metal particle combustion and classification Kuo, 2012 Kubota, 2002 Marchesi E. Dual-metal fuels for solid rocket propulsion MS Thesis. Milano: Politecnico di Milano; 2009. Marinovich A. Mg-B dual metal powders as performance enhancer for solid rocket propellants MS Thesis. Milan: Politecnico di Milano; 2010. Glotov, 2005, Effect of Al/B mechanical alloy on combustion characteristics of AP/HMX/energetic binder propellants Pace, 1993, Effect of magnesium-coated boron particles on burning characteristics of solid fuels in high-speed crossflows, Int J Energ Mater Chem Propuls, 2, 332 Wu, 2008, Effect of Mg and Al powders on combustion performance of boron-based fuel-rich propellant and oxidation efficiency of boron, Chin J Energ Mater, 16, 458 Gan, 2012, Combustion of nano fluid fuels with the addition of boron and iron particles at dilute and dense concentrations, Combust Flame, 159, 1732, 10.1016/j.combustflame.2011.12.008 Fan, 2015, Ignition and combustion performance of Mg/B composite powders, Min Metall, 24, 50 Hsia H.T.S. Air-augmented combustion of boron and boron-metal alloys. AFRPL-TR- 71-80, 1971. Yang J. Preparation and properties of B/Al and B/Mg composites PhD Thesis. Nanjing: Nanjing University of Science and Technology; 2014. Wang, 2018, Application of B/Al compound powder in energetic materials, J Weapon Equip Eng, 39, 157 Li, 1999, Improvement of combustion characteristics of solid propellant with coated boron Liang, 2016, Improvement in energy release properties of boron-based propellant by oxidant coating, Thermochim Acta, 638, 58, 10.1016/j.tca.2016.06.017 Xu, 2016, Combustion heat of the Al/B powder and its application in metallized explosives in underwater explosions, Combust Explos Shock Waves, 52, 342, 10.1134/S001050821603014X Hashim, 2019, Effects of Ti and Mg particles on combustion characteristics of boron–HTPB-based solid fuels for hybrid gas generator in ducted rocket applications, Acta Astronaut, 160, 125, 10.1016/j.actaastro.2019.04.002 Trunov, 2008, Combustion of boron-titanium nanocomposite powders in different environments, J Propul Power, 24, 184, 10.2514/1.30483 Chintersingh, 2018, Combustion of boron and boron–iron composite particles in different oxidizers, Combust Flame, 192, 44, 10.1016/j.combustflame.2018.01.043 Chintersingh, 2021, Effect of purity, surface modification and iron coating on ignition and combustion of boron in air, Combust Sci Technol, 193, 1567, 10.1080/00102202.2019.1702649 Cheng, 2021, B/Metal composites’ thermochemical properties and their effect on the performance of an ammonium perchlorate propellant, J Energ Mater, 39, 344, 10.1080/07370652.2020.1799114 Li, 1995, Improvement of combustion properties of propellants containing boron, J Solid Rocket Technol, 18, 39 Gregory, 2009, Combustion characteristics of boron nanoparticles, Combust Flame, 156, 322, 10.1016/j.combustflame.2008.10.007 Hu, 2004, Analysis of influence factors on primary combustion efficiency of boron fuel-rich propellant, J Solid Rocket Technol, 27, 204 Glassman, 1985, A physical and chemical interpretation of boron particle combustion, Symp (Int) Combust, 20, 2057, 10.1016/S0082-0784(85)80707-4 Wu, 2007, Effect of metal powder on combustion performance of boron-based propellant and oxidation efficiency of boron, Theory Pract Energ Mater, 7, 548 Xu, 2008, Combustion of fuel-rich based on boron solid propellant with KP, J Naval Aeronaut Astronaut Univ, 23, 380 Li, 1997, The studies of improving the combustion performance of fuel-rich propellant containing boron, J Propuls Technol, 18, 100 Xie, 2014, Combustion performance of boron coated with AP, Acta Armamentarii, 35, 194 Yang, 2007, Effect of superfine boron diameter on the thermal properties of B/AP composite, J Astronaut, 28, 1724 Aselage, 1997, Phosphorus doping of boron carbides, Phys Rev B Condens Matter Mater Phys, 56, 3122, 10.1103/PhysRevB.56.3122 Gao, 2009, Effect of coated and agglomerated boron on combustion characteristics of boron-based fuel-rich propellants, J Propuls Technol, 30, 119 Pang, 2020 Mao C. Combustion of boron-based poor oxygen propellant PhD Thesis. Xi'an: Northwestern Polytechnical University; 2001. Golovko, 1993, Ignition and combustion of boron in chlorine, 272 Feng, 2009, Experimental research of underwater energy of explosive containing boron/metal, Chin J Explos Propell, 32, 21 Connell, 2015, Boron and polytetrafluoroethylene as a fuel composition for hybrid rocket applications, J Propul Power, 31, 373, 10.2514/1.B35200 Shyu, 1995, Combustion characteristics of GAP-coated boron particles and the fuel-rich solid propellant, Combust Flame, 100, 634, 10.1016/0010-2180(94)00032-N Liu, 1996, Effect of fluorinated graphite on combustion of boron and boron-based fuel-rich propellants, J Propul Power, 12, 26, 10.2514/3.23986 Kong, 2015, Combustion characteristics of aluminum and boron nanoparticles based on flame color images, Opt Precis Eng, 23, 2288, 10.3788/OPE.20152308.2288 Devener, 2009, Air-stable, unoxidized, hydrocarbon dispersible boron nanoparticles, J Mater Res, 24, 3462, 10.1557/jmr.2009.0412 Pang, 2012, Energy and combustion characteristics of fuel-rich propellant with agglomerated boron particles, Chin J Explos Propellants, 35, 62 Pang, 2006, The influence of agglomerated boron on burning rate of fuel-rich solid propellant, Chin J Explos Propellants, 29, 20 Gao, 2008, Effect of agglomerated boron on combustion properties of fuel-rich propellants, J Solid Rocket Technol, 31, 161 Gao, 2008, Effect of oxidizer and agglomerated boron particle size on burning rate of fuel-rich propellants, J Solid Rocket Technol, 31, 374 Xu, 2014, Combustion characteristics and mechanism of boron-based fuel-rich propellants with agglomerated boron powder, Cent Eur J Energ Mater, 11, 575 Valluri, 2019, Fluorine-containing oxidizers for metal fuels in energetic formulations, Def Technol, 15, 1, 10.1016/j.dt.2018.06.001 Li, 2018, Pre-treatment and thermal reaction characterization analysis of boron-based powder fuel, J Solid Rocket Technol, 41, 537 Zhou, 1999, Multi-phase model for ignition and combustion of boron particles, Combust Flame, 117, 227, 10.1016/S0010-2180(98)00079-0 Ao, 2014, Ignition, combustion, and 264 of mixtures of amorphous and crystalline boron powders, Combust Explos Shock Waves, 50, 664, 10.1134/S0010508214060070 Ao, 2014, Ignition and combustion of boron particles at one to ten standard atmospheres, J Propul Power, 30, 760, 10.2514/1.B35054 Ao, 2012, Research progress on the ignition and combustion model of boron particles, J Solid Rocket Technol, 35, 361 Bouchacourt, 1985, Thermoelectric properties of hot-pressed boron suboxide, J Mater Sci, 20, 1237, 10.1007/BF01026319 Gottfried, 2021, Probing boron thermite energy release at rapid heating rates, Combust Flame, 231, 10.1016/j.combustflame.2021.111491 Huang, 2019, Experimental effective metal oxides to enhance boron combustion, Combust Flame, 205, 278, 10.1016/j.combustflame.2019.04.018 Young, 2012, Combustion of PTFE-boron compositions for propulsion applications, Int J Energ Mater Chem Propuls, 11, 451 Young, 2013, Combustion behavior of solid fuels based on PTFE/boron mixtures, Combust Sci Technol, 185, 1261, 10.1080/00102202.2013.787417 Liang, 2020, Nano carbides-mediated acceleration of energy release behavior of amorphous boron during ignition and combustion, Energy Rep, 6, 1160, 10.1016/j.egyr.2020.05.002 Jiang, 2020, Facilitating laser ignition and combustion of boron with a mixture of graphene oxide and graphite fluoride, Appl Energy Combust Sci, 1-4 Li, 1995, Particle size analysis of combustion residue of solid propellant, J Solid Rocket Technol, 18, 23 Liu, 2017, Factors affecting the primary combustion products of boron-based fuel-rich propellants, J Propul Power, 33, 333, 10.2514/1.B36134 Rashkovskiy, 2017, Boron particle agglomeration and formation of solid residues in combustion of boron- containing solid propellants Rashkovskiy, 1998, Metal agglomeration in solid propellants combustion: Part I. Dynamical model of process, Combust Sci Technol, 139, 125, 10.1080/00102209808924168 Rashkovskiy, 1998, Metal agglomeration in solid propellants combustion: Part II. Numerical experiments, Combust Sci Technol, 139, 149, 10.1080/00102209808924169 Rashkovskiy, 2017, Direct numerical simulation of boron particle agglomeration in combustion of boron-containing solid propellants, Combust Sci Technol, 189, 1277, 10.1080/00102202.2017.1294586 Fan, 2002, Effect of GAP coating boron on the ignition performance and combustion residues for boron-based propellants, J Propuls Technol, 23, 262 Liu, 2015, Chemical analysis of primary combustion products of boron-based fuel-rich propellants, RSC Adv, 5, 101416, 10.1039/C5RA13693H Liu, 2012, Effects of fuels on primary combustion of boron-based fuel-rich propellant, Chin J Energ Mater, 20, 475 DeLuca, 2010, Aggregation vs. agglomeration in metallized solid rocket propellants, Int J Energ Mater Chem Propuls, 1, 91 Dossi, 2011, Heterogeneity effects on agglomeration in aluminized solid propellants loaded with MgB powders Lebedeva, 2021, Combustion products agglomeration of propellant containing boron with fluorinated coatings, Combust Flame Mao, 2001, A review of the research on the ignition model of boron particles in hot air, J Propuls Technol, 22, 6 Hussmann, 2010, Extended combustion model for single boron particles - Part II: validation, Combust Flame, 157, 822, 10.1016/j.combustflame.2009.12.009 Beckstead, 2007, Modeling of combustion and ignition of solid propellant ingredients, Prog Energ Combust Sci, 33, 497, 10.1016/j.pecs.2007.02.003 Ermolaev, 2018, Diffusion model of combustion of large boron particles, Combust Explos Shock Waves, 54, 442, 10.1134/S0010508218040081 Macek, 1969, Combustion of boron particles at atmospheric pressure Hussmann, 2010, Extended combustion model for single boron particles – Part I: theory, Combust Flame, 157, 803, 10.1016/j.combustflame.2009.12.010 Altman, 2019, Burn time of metal nanoparticles, Materials, 12, 1368, 10.3390/ma12091368 Altman, 2020, On the possible coexistence of two different regimes of metal particle combustion, Combust Flame, 221, 416, 10.1016/j.combustflame.2020.08.015 Hill, 2019, Single particle combustion of pre-stressed aluminum, Materials, 12, 1737, 10.3390/ma12111737 Altman, 2020, On energy accommodation coefficient of gas molecules on metal surface at high temperatures, Surf Sci, 698, 10.1016/j.susc.2020.121609 Sun, 2019, Reactive shell model for boron oxidation, J Phys Chem C, 123, 11807, 10.1021/acs.jpcc.9b03363 Chintersingh, 2019, Heterogeneous reaction kinetics for oxidation and combustion of boron, Thermochim Acta, 682, 10.1016/j.tca.2019.178415 Weiser, 2001, Influence of the metal particle size on ignition and combustion of energetic materials DeLuca, 2010, Aggregation and incipient agglomeration in metallized solid propellants and solid fuels for rocket propulsion Pei, 2006, Explosion performance of thermobaric fuel containing boron, Chin J Explos Propellants, 29, 1 Liu, 2012, Research on the effect of prescription on the adiabatic flame temperature of the boron-based fuel-rich propellant, Sci Technol Eng, 12, 1211 Wang, 2004, Study on combustion mechanism of fuel-rich propellant holding boron coated with AP, Chin J Explos Propellants, 27, 44 Xu, 2008, Establishment of the primary combustion model of fuel-rich solid propellant with agglomerated boron powder, Chin J Explos Propellants, 31, 34 Wang, 2006, Low-pressure combustion model of boron fuel-rich propellant, J Solid Rocket Technol, 29, 39 Dreizin, 2014, Effect of surface tension on the temperature of burning metal droplets, Combust Flame, 161, 3263, 10.1016/j.combustflame.2014.05.017 McNesby, 2015, Chemical imaging of explosions – mapping BO2 light emission, Propell Explos Pyrot, 40, 539, 10.1002/prep.201500106 Zarko, 2022, Contemporary methods to measure regression rate of energetic materials, Prog Energy Combust Sci, 100980 Liu, 2015, Effect of content of boron powder on properties of Mg/PTFE fuel-rich propellant, Chin J Explos Propellants, 38, 71 Wei, 2013, Application of different particle sizes of boron in Mg/PTFE pyrotechnic compositions, Chin J Explos Propellants, 36, 83 Li, 2019, Study on energy output characteristics of explosives containing B/Al in the air blast, Combust Explos Shock Waves, 55, 723, 10.1134/S0010508219060145 Fang, 2015, Research on the explosion energy of explosive with boron-containing hydrogen-storage-alloy, Initiat Pyrotech, 2, 36 Feng, 2013, Energy research of explosive containing hydrogen storage alloy, Explos Mater, 42, 13 Zhang, 2016, Effect of boron-containing hydrogen-storage-alloy (Mg(BHx)y) on the explosion energy of nitric ester explosive, Chin J Energ Mater, 24, 1205 Yang, 2015, Applications of hydrogen-storage materials in high-energy solid rocket propellants, Chin J Explos Propellants, 38, 8 Zhang, 2007, Progress in combustion characteristics of boron-based fuel-rich propellant, Chin J Energ Mater, 15, 436 Diwan, 2008, Noncatalytic hydrothermolysis of ammonia borane, Int J Hydrog Energy, 33, 1135, 10.1016/j.ijhydene.2007.12.049 Rodriguez, 2015, Hydrogen generation from ammonia borane and water through combustion reactions with mechanically alloyed Al·Mg powder, Combust Flame, 162, 1498, 10.1016/j.combustflame.2014.11.019 Zhang, 2019, Reaction activity of terminal hydroxyl groups of HTPB, PBT and GAP with boron at high shear rate, Chin J Energ Mater, 27, 622 Zohari, 2013, The advantages and shortcomings of using nano-sized energetic materials, Cent Eur J Energ Mater, 10, 135 Pang, 2022 Jiang, 2014, Research progress of high active nano metal (or non-metal) powders for solid propellants, Chem Propellants Polym Mater, 12, 58 Armstrong, 2003, Enhanced propellant combustion with nanoparticles, Nano Lett, 3, 253, 10.1021/nl025905k Stamatis D. Multifunctional reactive nanocomposite materials PhD Thesis. New Jersey, Newark: New Jersey Institute of Technology; 2011. Rossi, 2007, Nanoenergetic materials for MEMS: a review, J Microelectromech Syst, 16, 919, 10.1109/JMEMS.2007.893519 Rashkovskiy, 2005, Statistical simulation of aluminum agglomeration during combustion of heterogeneous condensed mixtures, Combust Explos Shock Waves, 41, 174, 10.1007/s10573-005-0020-4 Rashkovskiy, 2009, Direct numerical simulation of aluminum agglomeration in composite solid propellant combustion, Int J Energ Mater Chem Propuls, 8, 1 Gromov, 2008, Combustion of the “Ti-TiO2” and “Ti-Al” powdery mixtures in air, J Eur Ceram Soc, 28, 1731, 10.1016/j.jeurceramsoc.2007.11.009 Yang, 2018, Research and development of activation methods of boron powder, Explos Mater, 47, 1 Mansurov, 2020, Recent achievements and future challenges in nanoscience and nanotechnology, Eurasian Chem Technol J, 22, 241, 10.18321/ectj994 Hao, 2004, Study on the combustion performance of B/Pb3O4 pyrotechnic compound, Initiat Pyrotech, 24 Chen, 2018, Effect of Mg powder on the energy release property of boron-based fuel-rich propellants, J Solid Rocket Technol, 41, 458 Qin, 2021, Ignition and combustion behavior of Al-Mg-Zr in composite propellants Glotov, 2000, Condensed combustion products of aluminized propellants. II. Evolution of particles with distance from the burning surface, Combust Explos Shock Waves, 36, 476, 10.1007/BF02699478 Glotov, 2002, Condensed combustion products of aluminized propellants. III. Effect of an inert gaseous combustion environment, Combust Explos Shock Waves, 38, 92, 10.1023/A:1014018303660 Zarko, 2013, Formation of Al oxide particles in combustion of aluminized condensed systems (review), Sci Technol Energ Mater, 74, 139 Huang S. Enhancing the ignition and combustion performance of metal-based energetic materials. PhD Thesis. Stanford University; 2019. Glassman, 1992, A new definition and theory of metal pyrophoricity, Combust Sci Technol, 83, 161, 10.1080/00102209208951829 Korotkikh, 2017, Effect of iron and boron ultrafine powders on combustion of aluminized solid propellants, Combust Flame, 178, 195, 10.1016/j.combustflame.2017.01.004 Xu M. Research on the fuel-air explosives containing high energetic alloys PhD Thesis. Nanjing University of Science and Technology; 2017. Wu, 2010, Al-Mg-B thin films prepared by magnetron sputtering, Vacuum, 85, 541, 10.1016/j.vacuum.2010.09.004 Mironov, 2010, Al-W-B powder materials, Est J Eng, 16, 142, 10.3176/eng.2010.2.03 Pavlov, 2017, Simulation of boron and carbon fiber composite characteristics of the elasticity, 11