Bond behaviour of CFRP tendons in UHPFRC

Cheyrezy, 1995, Microstructural analysis of RPC (reactive powder concrete), Cem Concr Res, 25, 1491, 10.1016/0008-8846(95)00143-Z Richard, 1995, Composition of reactive powder concretes, Cem Concr Res, 25, 1501, 10.1016/0008-8846(95)00144-2 Deutscher Ausschuss für Stahlbeton (DAfStb): Sachstandsbericht Ultrahochfester Beton, Heft 561 (in German); 2008. Association Française de Génie Civil (AFGC): Ultra High Performance Fibre-Reinforced Concretes – Recommendations; 2013. Federal Highway Administration: Material Property Characterization of Ultra-High Performance Concrete. FHWA-HRT-06-103. U.S. Department of Transportation; 2006. Federal Highway Administration: Structural Behavior of Ultra-High Performance Concrete Prestressed I-Girders. FHWA-HRT-06-115. U.S. Department of Transportation; 2006. Honarvar, 2016, Bridge decks with precast UHPC waffle panels: a field evaluation and design optimization, J Bridge Eng, 21, 1, 10.1061/(ASCE)BE.1943-5592.0000775 Laufs, 2014, Ductal-Fassade Louis Vuitton in Aventura/Florida, Bautechnik, 91, 186, 10.1002/bate.201400011 Lee, 2013, Application of ultra-high performance concrete to pedestrian cable-stayed bridges, J Eng Sci Technol, 8, 296 Stark A, Kueres D, Hegger J. Sandwichelemente mit UHPC-Deckschichten und geschäumten PUR-Kernschichten. In: Beton-und Stahlbetonbau; 2016 [in German]. Voo, 2014, Ultrahigh-performance concrete segmental bridge technology: Toward sustainable bridge construction, J Bridge Eng, 20, 10.1061/(ASCE)BE.1943-5592.0000704 ACI 440.4R-04: Prestressing concrete Structures with FRP Tendons. American Concrete Institute (ACI); 2004 (2011). Lu, 2000, Transfer and development lengths of FRP prestressing tendons, PCI J, 45, 84, 10.15554/pcij.03012000.84.95 Mahmoud, 1999, Transfer and development lengths of carbon fiber reinforced polymers prestressing reinforcement, ACI Struct J, 96, 594 Nanni, 1996, Performance of FRP tendon-anchor systems for prestressed concrete structures, PCI J, 41, 34, 10.15554/pcij.01011996.34.44 Rizkalla, 2012, Innovative use of FRP for the precast concrete industry, Adv Struct Eng, 15, 565, 10.1260/1369-4332.15.4.565 Soudki, 1997, Transfer length of carbon fiber rods in precast pretensioned concrete beams, PCI J, 42, 78, 10.15554/pcij.09011997.78.87 Stark, 2013, Verbundverhalten von CFK-Spannbewehrungen in UHPFRC, Beton-Stahlbetonbau, 108, 701, 10.1002/best.201300038 Shams, 2015, Innovative sandwich structures made of high performance concrete and foamed polyurethane, Compos Struct, 121, 271, 10.1016/j.compstruct.2014.11.026 Terrasi, 2013, Prefabricated thin-walled structural elements made from high performance concrete prestressed with CFRP wires, J Mater Sci Res, 2, 1 Japan Society of Civil Engineers: Recommendations for Design and Construction of Concrete Structures using Continuous Fiber Reinforcing Materials; 1997. CEB-FIP fib Bulletin 40: FRP Reinforcement for RC Structures. Technical Report on the Design and Use of Fibre Reinforced Polymer Reinforcement (FRP) for Reinforced Concrete Structures; 2007. Design and construction of building components with fibre-reinforced polymers. CAN/CSA S806; 2012. Bertram, 2012, Verbundverhalten von vorgespannten Litzen in UHPC, Beton-und Stahlbetonbau, 107, 23, 10.1002/best.201100060 Schydt, 2008, Long term behavior of ultra high performance concrete under the attack of chlorides and aggressive waters, 231 DIN EN 12350 Testing fresh concrete - Part 2: Slump-test; German version, EN 12350-2:2009; 2009. DIN EN 12350: Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test; German version EN 12350-8:2010; 2010. DIN EN 206-1: Concrete - Specification, performance, production and conformity; German version EN 206:2013+A1:2016; 2017. DIN EN 196-1: Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:2016; 2016. Stark A. Analysis of prestressed sandwich panels with ultra-high performance concrete facings. In: Institute of structural concrete, RWTH Aachen University, Doctoral Thesis; 2017. International Union of Testing and Research Laboratories for Materials and Structures (RILEM): RC 6 TC9‐RC: Bond test for reinforcement steel. 2. Pull-out test, 1973 (2nd edition 1983). Nitsch, 2001 Bertram, 2012 Eurocode 2: Design of Concrete Structures – Part 1-1: General rules and rules for buildings. EN 1992-1-1:2004; 2004. Deutsches Institut für Bautechnik (DIBt): Richtlinie für die Prüfung von Spannstählen auf ihre Eignung zur Verankerung durch sofortigen Verbund; 1980 [in German]. Abaqus 6.14: documentation. Dassault Systemes Simulia Corporation; 2014. Feenstra, 1996, A composite plasticity model for concrete, Int J Solids Struct, 33, 707, 10.1016/0020-7683(95)00060-N Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem Concr Res, 6, 773, 10.1016/0008-8846(76)90007-7 Sargin, 1971 Speck, 2007 Kueres D, Stark A, Herbrand M, Classen M. Numerische Abbildung von Beton mit einem plastischen Schädigungsmodell - Grundlegende Untersuchungen zu Normalbeton und UHPC [in German]. In: Bauingenieur, vol. 90; 2015. p. 252–64. Herbrand, 2016, Numerische Simulation von balken-und plattenförmigen Bauteilen aus Stahlbeton und UHPC mit einem plastischen Schädigungsmodell (in German), Bauingenieur, 91, 46, 10.37544/0005-6650-2016-02-28 Tepfers, 1979, Cracking of concrete cover along anchored deformed reinforcing bars, Mag Concr Res, 31, 3, 10.1680/macr.1979.31.106.3 Oh, 2006, Theoretical analysis of transfer lengths in pretensioned prestressed concrete members, J Eng Mech, 132, 1057, 10.1061/(ASCE)0733-9399(2006)132:10(1057) Han, 2014, Degradation of flexural strength in reinforced concrete members caused by steel corrosion, Constr Build Mater, 54, 572, 10.1016/j.conbuildmat.2013.12.101 Han, 2016, Estimation of transfer lengths in precast pretensioned concrete members based on a modified thick-walled cylinder model, Struct Concr, 17, 52, 10.1002/suco.201500049 CEB-FIP fib Bulletin 65/66: Model Code 2010. Final draft, Volume 1+2, 2012. Wang, 2004, Modeling bond strength of corroded reinforcement without stirrups, Cem Concr Res, 34, 1331, 10.1016/j.cemconres.2003.12.028 Laldji, 1988, Bond between steel strand and cement grout in ground anchorages, Mag Concr Res, 40, 90, 10.1680/macr.1988.40.143.90 Nanni, 1992, Bond anchorage of pretensioned FRP tendon at force release, J Struct Eng, 118, 2837, 10.1061/(ASCE)0733-9445(1992)118:10(2837) Den Uijl J. Bond modelling of prestressing strand. In: ACI Special Publication, vol. 180; 1998. p. 145–70.