Blood-repellent and anti-corrosive surface by spin-coated SWCNT layer on intravascular stent materials
Tóm tắt
Từ khóa
Tài liệu tham khảo
Sánchez R, Pérez L, Einersen M (2021) Covered stent treatment of an extracranial internal carotid artery pseudoaneurysm in a three year old child with 12 years of follow up: a case report. EJVES Vasc Forum. https://doi.org/10.1016/j.ejvsvf.2021.05.003
Cui G, Bi Z, Wang S et al (2020) A comprehensive review on smart anti-corrosive coatings. Prog Org Coat. https://doi.org/10.1016/j.porgcoat.2020.105821
Maleknia M, Ansari N, Haybar H et al (2020) Inflammatory growth factors and in-stent restenosis: effect of cytokines and growth factors. SN Compr Clin Med. https://doi.org/10.1007/s42399-020-00240-0
Gilbert JL, Mali SA (2012) Medical implant corrosion: electrochemistry at metallic biomaterial surfaces. Degradation of implant materials. Springer, New York, pp 1–28
Shih CM, Huang CY, Liao LR et al (2015) Nickel ions from a corroded cardiovascular stent induce monocytic cell apoptosis: proposed impact on vascular remodeling and mechanism. J Formos Med Assoc 114:1088–1096. https://doi.org/10.1016/j.jfma.2014.03.007
Høl PJ, Gjerdet NR, Jonung T (2019) Corrosion and metal release from overlapping arterial stents under mechanical and electrochemical stress—an experimental study. J Mech Behav Biomed Mater 93:31–35. https://doi.org/10.1016/j.jmbbm.2019.02.001
Romero-Brufau S, Best PJM, Holmes DR et al (2012) Outcomes after coronary stent implantation in patients with metal allergy. Circ Cardiovasc Interv 5:220–226. https://doi.org/10.1161/CIRCINTERVENTIONS.111.966614
Gong Z, Li M, Guo X et al (2013) Stent implantation in patients with metal allergy: a systemic review and meta-analysis. Coron Artery Dis. https://doi.org/10.1097/MCA.0b013e3283647ad1
Wang Y, Ma Y, Gao P et al (2021) Paclitaxel coated balloon vs. bare metal stent for endovascular treatment of symptomatic vertebral artery origin stenosis patients: protocol for a randomized controlled trial. Front Neurol. https://doi.org/10.3389/fneur.2020.579238
Viswanathan S, Gopinath K, Koshy G et al (2018) Open-labeled randomized controlled trial to evaluate the 1-year clinical outcomes of polymer-free sirolimus-eluting coronary stents as compared with biodegradable polymer-based sirolimus-eluting coronary stents. Indian Heart J. https://doi.org/10.1016/j.ihj.2018.08.015. 70:
Bedair TM, Park W, Park BJ et al (2018) Dual-layer coated drug-eluting stents with improved degradation morphology and controlled drug release. Macromol Res. https://doi.org/10.1007/s13233-018-6110-4
Zhu W, Zhang R, Liu S et al (2021) The effect of nanoparticles of cobalt–chromium on human aortic endothelial cells in vitro. J Appl Toxicol. https://doi.org/10.1002/jat.4177
Saia F (2017) Surgery after drug-eluting stent implantation: it’s not all doom and gloom! J Thorac Dis 9:E373–E377. https://doi.org/10.21037/jtd.2017.03.126
Pandelea-Dobrovicescu GR, Prodana M, Golgovici F et al (2020) Surface morphology and histopathological aspects of metallic used cardiovascular cocr stents. Metals (Basel). https://doi.org/10.3390/met10091112
Ren L, Yang K (2013) Bio-functional design for metal implants, a new concept for development of metallic biomaterials. J Mater Sci Technol. https://doi.org/10.1016/j.jmst.2013.09.008
Huang Z, Zhu Y, Zhang J, Yin G (2007) Stable biomimetic superhydrophobicity and magnetization film with Cu–ferrite nanorods. J Phys Chem C 111:6821–6825. https://doi.org/10.1021/jp0678554
Wu H, Zhang R, Sun Y et al (2008) Biomimetic nanofiber patterns with controlled wettability. Soft Matter 4:2429–2433
Kaseem M, Fatimah S, Nashrah N, Ko YG (2020) Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance. Prog Mater Sci. https://doi.org/10.1016/j.pmatsci.2020.100735
Reis RL, Weiner S (2004) Learning from nature how to design new implantable biomaterials: from biomineralization fundamentals to biomimetic materials and processing routes. Kluwer Academic Publishers, London
Wang P, Zhao T, Bian R et al (2017) Robust superhydrophobic carbon nanotube film with lotus leaf mimetic multiscale hierarchical structures. ACS Nano 11:12385–12391. https://doi.org/10.1021/acsnano.7b06371
Bixler GD, Bhushan B (2013) Fluid drag reduction and efficient self-cleaning with rice leaf and butterfly wing bioinspired surfaces. Nanoscale 5:7685–7710
Kim K, Lichtenhan JD, Otaigbe JU (2019) Facile route to nature inspired hydrophobic surface modification of phosphate glass using polyhedral oligomeric silsesquioxane with improved properties. Appl Surf Sci 470:733–743. https://doi.org/10.1016/j.apsusc.2018.11.181
Han M, Go S, Ahn Y (2012) Fabrication of superhydrophobic surface on magnesium substrate by chemical etching. Bull Korean Chem Soc 33:1363–1366. https://doi.org/10.5012/bkcs.2012.33.4.1363
Bai WQ, Li LL, Xie YJ et al (2016) Corrosion and tribocorrosion performance of M (MTa, Ti) doped amorphous carbon multilayers in Hank’s solution. Surf Coat Technol 305:11–22. https://doi.org/10.1016/j.surfcoat.2016.07.078
Sun K, Liu H, Wang X, Wu D (2019) Innovative design of superhydrophobic thermal energy-storage materials by microencapsulation of n-docosane with nanostructured ZnO/SiO2 shell. Appl Energy 237:549–565. https://doi.org/10.1016/j.apenergy.2019.01.043
Chen B, Lv Z, Guo F, Huang Y (2020) Integrated CNTs/SiO2 nano-additives on SBS polymeric superhydrophobic coatings for self-cleaning. Surf Eng 36:601–606. https://doi.org/10.1080/02670844.2019.1650456
Zhou S, Zhu X, Ma L et al (2018) Outstanding superhydrophobicity and corrosion resistance on carbon-based film surfaces coupled with multi-walled carbon nanotubes and nickel nano-particles. Surf Sci 677:193–202. https://doi.org/10.1016/j.susc.2018.07.010
Toro RG, Calandra P, Federici F et al (2020) Development of superhydrophobic, self-cleaning, and flame-resistant DLC/TiO2 melamine sponge for application in oil–water separation. J Mater Sci 55:2846–2859. https://doi.org/10.1007/s10853-019-04211-2
Wu N, Wan LY, Wang Y, Ko F (2017) Conversion of hydrophilic SiOC nanofibrous membrane to robust hydrophobic materials by introducing palladium. Appl Surf Sci 425:750–757. https://doi.org/10.1016/j.apsusc.2017.07.098
Liu HQ (2017) Improving the hemocompatibility of stents. In: Siedlecki C (ed) Hemocompatibility of biomaterials for clinical applications. Elsevier, Amsterdam, pp 379–394
Xu X, Wang L, Wang G, Jin Y (2017) The effect of REDV/TiO2 coating coronary stents on in-stent restenosis and re-endothelialization. J Biomater Appl. https://doi.org/10.1177/0885328216675829
Gao F, Hu Y, Li G et al (2020) Layer-by-layer deposition of bioactive layers on magnesium alloy stent materials to improve corrosion resistance and biocompatibility. Bioact Mater 5:611–623. https://doi.org/10.1016/j.bioactmat.2020.04.016
Yang F, Chang R, Webster TJ (2019) Atomic layer deposition coating of TiO2 nano-thin films on magnesium-zinc alloys to enhance cytocompatibility for bioresorbable vascular stents. Int J Nanomed. https://doi.org/10.2147/IJN.S199093
Mao L, Shen L, Chen J et al (2015) Enhanced bioactivity of Mg–Nd–Zn–Zr alloy achieved with nanoscale MgF2 surface for vascular stent application. ACS Appl Mater Interfaces. https://doi.org/10.1021/am5086885
Nuhn H, Blanco CE, Desai TA (2017) Nanoengineered stent surface to reduce in-stent restenosis in vivo. ACS Appl Mater Interfaces. https://doi.org/10.1021/acsami.7b04626
Shim JW, Bae IH, Park DS et al (2017) Evaluation of ion implantation for anti-thrombogenic coronary stent in vitro and in vivo. J Ind Eng Chem. https://doi.org/10.1016/j.jiec.2017.06.003
Wang J, Zhang K, Wang F, Zheng W (2018) Improving frictional properties of DLC films by surface energy manipulation. RSC Adv. https://doi.org/10.1039/c8ra00580j
Kalin M, Polajnar M (2013) The effect of wetting and surface energy on the friction and slip in oil-lubricated contacts. Tribol Lett. https://doi.org/10.1007/s11249-013-0194-y
Polajnar M, Kalin M (2015) Effect of the slide-to-roll ratio and the contact kinematics on the elastohydrodynamic friction in diamond-like-carbon contacts with different wetting behaviours. Tribol Lett. https://doi.org/10.1007/s11249-015-0593-3
Wang F, Tay TE, Sun Y et al (2019) Low-voltage and -surface energy SWCNT/poly(dimethylsiloxane) (PDMS) nanocomposite film: surface wettability for passive anti-icing and surface-skin heating for active deicing. Compos Sci Technol. https://doi.org/10.1016/j.compscitech.2019.107872
Li Y, Huang XJ, Heo SH et al (2007) Superhydrophobic bionic surfaces with hierarchical microsphere/SWCNT composite arrays. Langmuir. https://doi.org/10.1021/la0620758
Singh G, Ablyaz TR, Shlykov ES et al (2020) Enhancing corrosion and wear resistance of Ti6Al4V alloy using CNTs mixed electro-discharge process. Micromachines (Basel). https://doi.org/10.3390/MI11090850
Francis AA, Abdel-Gawad SA, Shoeib MA (2021) Toward CNT-reinforced chitosan-based ceramic composite coatings on biodegradable magnesium for surgical implants. J Coat Technol Res. https://doi.org/10.1007/s11998-021-00468-y
Pascu A, Stanciu EM, Croitoru C et al (2019) Pulsed laser cladding of NiCrBSiFeC hardcoatings using single-walled carbon nanotube additives. J Nanomater. https://doi.org/10.1155/2019/2401295
Mosayyebi A, Manes C, Carugo D, Somani BK (2018) Advances in ureteral stent design and materials. Curr Urol Rep. https://doi.org/10.1007/s11934-018-0779-y
Frattolin J, Cattarinuzzi E, Rajagopalan S et al (2021) Development of a micro-scale method to assess the effect of corrosion on the mechanical properties of a biodegradable Fe-316L stent material. J Mech Behav Biomed Mater. https://doi.org/10.1016/j.jmbbm.2020.104173
Kataruka A, Otto CM (2018) Valve durability after transcatheter aortic valve implantation. J Thorac Dis. https://doi.org/10.21037/jtd.2018.07.38
Kim BM (2017) Causes and solutions of endovascular treatment failure. J Stroke. https://doi.org/10.5853/jos.2017.00283
Ferrari G, Geijer H, Cao Y et al (2021) Percutaneous coronary intervention in saphenous vein grafts after coronary artery bypass grafting: a systematic review and meta-analysis. Scand Cardiovasc J. https://doi.org/10.1080/14017431.2021.1900598
Planell JA, Navarro M, Altankov G et al (2010) Materials surface effects on biological interactions. In: Shastri VP, Altankov G, Lendlein A (eds) Advances in regenerative medicine: role of nanotechnology, and engineering principles. Springer, Cham, pp 233–252
ASTM (2017) ASTM F22-02 standard test method for hydrophobic surface films by the water-break test. Annual Book of ASTM Standards 15:1–2
ASTM (2013) ASTM D7490-13 standard test method for measurement of the surface tension of solid coatings, substrates and pigments using contact angle measurements. Annual Book of ASTM Standards 6:1–5
ASTM (2018) ASTM D1193-06(2018) standard specification for reagent water. Annual Book of ASTM Standards 11:1–6
Kokubo T, Takadama H (2006) How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27:2907–2915. https://doi.org/10.1016/j.biomaterials.2006.01.017
Mo X, Qian J, Chen Y et al (2021) Corrosion and degradation decelerating alendronate embedded zinc phosphate hybrid coating on biodegradable Zn biomaterials. Corros Sci. https://doi.org/10.1016/j.corsci.2021.109398
Yang C, Wang Q, Ren Y et al (2021) Corrosion behavior of high nitrogen nickel-free austenitic stainless steel in the presence of artificial saliva and Streptococcus mutans. Bioelectrochemistry. https://doi.org/10.1016/j.bioelechem.2021.107940
Tekdir H, Yetim T, Yetim AF (2021) Corrosion properties of ceramic-based TiO2 Films on plasma oxidized Ti6Al4V/316L layered implant structured manufactured by selective laser melting. J Bionic Eng. https://doi.org/10.1007/s42235-021-0055-6
ASTM (2015) ASTM G102–89(2015)e1 standard practice for calculation of Corrosion Rates and Related Information from Electrochemical measurements. Annual Book of ASTM Standards 3:1–7
Lein HL (2019) Coatings and surfaces with hydrophobic and anti-icing properties. Front Nanosci. https://doi.org/10.1016/B978-0-08-102572-7.00009-X
Rudawska A, Jacniacka E (2018) Evaluating uncertainty of surface free energy measurement by the van Oss-Chaudhury-Good method. Int J Adhes Adhes. https://doi.org/10.1016/j.ijadhadh.2018.01.006. 82: