Biomechanical evaluation of one-piece and two-piece small-diameter dental implants: In-vitro experimental and three-dimensional finite element analyses

Fretwurst, 2015, A prospective study of factors influencing morbidity after iliac crest harvesting for oral onlay grafting, J Craniomaxillofac Surg, 43, 705, 10.1016/j.jcms.2015.03.023 Hsu, 2009, Bone strain and interfacial sliding analyses of platform switching and implant diameter on an immediately loaded implant: experimental and three-dimensional finite element analyses, J Periodontol, 80, 1125, 10.1902/jop.2009.090013 Isidor, 2006, Influence of forces on peri-implant bone, Clin Oral Implants Res, 17, 8, 10.1111/j.1600-0501.2006.01360.x Qian, 2012, Reasons for marginal bone loss around oral implants, Clin Implant Dent Relat Res, 14, 792, 10.1111/cid.12014 Allum, 2008, The impact of loads on standard diameter, small diameter and mini implants: a comparative laboratory study, Clin Oral Implants Res, 19, 553, 10.1111/j.1600-0501.2007.01395.x Albrektsson, 2007, Survival of NobelDirect implants: an analysis of 550 consecutively placed implants at 18 different clinical centers, Clin Implant Dent Relat Res, 9, 65, 10.1111/j.1708-8208.2007.00054.x Pabst, 2015, Analysis of implant-failure predictors in the posterior maxilla: a retrospective study of 1395 implants, J Craniomaxillofac Surg, 43, 414, 10.1016/j.jcms.2015.01.004 Lee, 2013, Long-term retrospective study of narrow implants for fixed dental prostheses, Clin Oral Implants Res, 24, 847, 10.1111/j.1600-0501.2012.02472.x Maiorana, 2015, Clinical and radiographic evaluation of early loaded narrow-diameter implants: 3 years follow-up, Clin Oral Implants Res, 26, 77, 10.1111/clr.12281 Lee, 2005, Effect of implant size and shape on implant success rates: a literature review, J Prosthet Dent, 94, 377, 10.1016/j.prosdent.2005.04.018 Degidi, 2008, Clinical outcome of narrow diameter implants: a retrospective study of 510 implants, J Oral Implantol, 79, 49 Sennerby, 2008, Short-term clinical results of Nobel Direct implants: a retrospective multicentre analysis, Clin Oral Implants Res, 19, 219, 10.1111/j.1600-0501.2007.01410.x Jackson, 2011, Small diameter implants: Specific indications and considerations for the posterior mandible: a case report, J Oral Implantol, 37, 156, 10.1563/AAID-JOI-D-09-00142.1 Romeo, 2006, Clinical and radiographic evaluation of small-diameter (3.3-mm) implants followed for 1–7 years: a longitudinal study, Clin Oral Implants Res, 17, 139, 10.1111/j.1600-0501.2005.01191.x Maló, 2011, Implants (3.3-mm diameter) for the rehabilitation of edentulous posterior regions: a retrospective clinical study with up to 11 years of follow-up, Clin Implant Dent Relat Res, 13, 95, 10.1111/j.1708-8208.2009.00188.x Wu, 2014, Biomechanical effects of the implant material and implant–abutment interface in immediately loaded small-diameter implants, Clin Oral Investig, 18, 1335, 10.1007/s00784-013-1099-8 Bourauel, 2012, Biomechanical finite element analysis of small diameter and short dental implants: extensive study of commercial implants, Biomed Tech (Berl), 57, 21, 10.1515/bmt-2011-0047 Chong, 2009, Effect of implant design on initial stability of tapered implants, J Oral Implantol, 35, 130, 10.1563/1548-1336-35.3.130 Misch, 1999, Density of bone: effect on surgical approach and healing, 372 Hahn, 1999, Clinical uses of osteotomes, J Oral Implantol, 25, 23, 10.1563/1548-1336(1999)025<0023:CUOO>2.3.CO;2 Alsaadi, 2007, A biomechanical assessment of the relation between the oral implant stability at insertion and subjective bone quality assessment, J Clin Periodontol, 34, 359, 10.1111/j.1600-051X.2007.01047.x Steiner, 2009, In-vitro evaluation of a mechanical testing chewing simulator, Dent Mater, 25, 494, 10.1016/j.dental.2008.09.010 Alkan, 2004, Influence of occlusal forces on stress distribution in preloaded dental implant screws, J Prosthet Dent, 91, 319, 10.1016/j.prosdent.2004.01.016 Niinomi, 1998, Mechanical properties of biomedical titanium alloys, Mater Sci Eng, 243, 231, 10.1016/S0921-5093(97)00806-X Cavit Çehreli, 2004, Force transmission of one- and two-piece morse-taper oral implants: a nonlinear finite element analysis, Clin Oral Implants Res, 15, 481, 10.1111/j.1600-0501.2004.01025.x Östman, 2007, Direct loading of Nobel Direct and Nobel Perfect one-piece implants: a 1-year prospective clinical and radiographic study, Clin Oral Implants Res, 18, 409, 10.1111/j.1600-0501.2007.01346.x Van de Velde, 2009, Two-year outcome with Nobel Direct implants: a retrospective radiographic and microbiologic study in 10 patients, Clin Implant Dent Relat Res, 11, 183, 10.1111/j.1708-8208.2008.00112.x Geng, 2001, Application of finite element analysis in implant dentistry: a review of the literature, J Prosthet Dent, 85, 585, 10.1067/mpr.2001.115251 Murakami, 2014, Finite element contact analysis as a critical technique in dental biomechanics: a review, J Prosthodont Res, 58, 92, 10.1016/j.jpor.2014.03.001