Biomechanical analysis of functionally graded porous interbody cage for lumbar spinal fusion

Costa, 2013, Instrumented fusion surgery in elderly patients (over 75 years old): clinical and radiological results in a series of 53 patients, Eur. Spine J., 22, S910, 10.1007/s00586-013-3021-0 Tarpada, 2016, Spinal fusion surgery: a historical perspective, J. Orthop., 14, 134, 10.1016/j.jor.2016.10.029 Tavares, 2022, A systematic review and meta-analysis of fusion rate enhancements and bone graft options for spine surgery, Sci. Rep., 12, 10.1038/s41598-022-11551-8 Tsai, 2016, Biomechanical investigation into the structural design of porous additive manufactured cages using numerical and experimental approaches, Comput. Biol. Med., 76, 14, 10.1016/j.compbiomed.2016.06.016 Kapat, 2017, Influence of porosity and pore-size distribution in Ti6Al4 V foam on physicomechanical properties, osteogenesis, and quantitative validation of bone ingrowth by micro-computed tomography, ACS Appl. Mater. Interfaces, 9, 39235, 10.1021/acsami.7b13960 Bandyopadhyay, 2010, Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants, Acta Biomater., 6, 1640, 10.1016/j.actbio.2009.11.011 McGilvray, 2018, Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model, Spine J., 18, 1250, 10.1016/j.spinee.2018.02.018 Zhang, 2018, Finite element model predicts the biomechanical performance of transforaminal lumbar interbody fusion with various porous additive manufactured cages, Comput. Biol. Med., 95, 167, 10.1016/j.compbiomed.2018.02.016 Chen, 2021, Computational comparison of three different cage porosities in posterior lumbar interbody fusion with porous cage, Comput. Biol. Med., 139, 10.1016/j.compbiomed.2021.105036 Talukdar, 2022, Bone remodeling around solid and porous interbody cages in the lumbar spine, J. Biomech. Eng., 144, 10.1115/1.4054457 Vasconcellos, 2010, Evaluation of bone ingrowth into porous titanium implant: histomorphometric analysis in rabbits, Braz. Oral Res., 24, 399, 10.1590/S1806-83242010000400005 Bahraminasab, 2013, Material tailoring of the femoral component in a total knee replacement to reduce the problem of aseptic loosening, Mater. Des., 52, 441, 10.1016/j.matdes.2013.05.066 Arabnejad, 2017, Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty, J. Orthop. Res., 35, 1774, 10.1002/jor.23445 Arabnejad, 2012, Multiscale design and multiobjective optimization of orthopedic hip implants with functionally graded cellular material, J. Biomech. Eng., 134 Chashmi, 2020, Design and analysis of porous functionally graded femoral prostheses with improved stress shielding, Design, 4, 12, 10.3390/designs4020012 Wang, 2018, Hip implant design with three-dimensional porous architecture of optimized graded density, ASME. J. Mech. Des., 140, 10.1115/1.4041208 Singh, 2018, Heterogeneous modeling based prosthesis design with porosity and material variation, J. Mech. Behav. Biomed. Mater., 87, 124, 10.1016/j.jmbbm.2018.07.029 Moussa, 2020, Topology optimization of 3D-printed structurally porous cage for acetabular reinforcement in total hip arthroplasty, J. Mech. Behav. Biomed. Mater., 105, 10.1016/j.jmbbm.2020.103705 Saviour, 2023, Design of a functionally graded porous uncemented acetabular component: influence of polar gradation, Int. J. Numerical Method. Biomed. Eng., 10.1002/cnm.3709 Kang, 2017, Biomechanical evaluation of Pedicle screw fixation system in spinal adjacent levels using polyetheretherketone, carbon-fiber-reinforced polyetheretherketone, and traditional titanium as Rod Materials, Compos. B Eng., 130, 248, 10.1016/j.compositesb.2017.07.052 Ghosh, 2014, Bone remodelling around cementless composite acetabular components: the effects of implant geometry and implant–bone interfacial conditions, J. Mech. Behav. Biomed. Mater., 32, 257, 10.1016/j.jmbbm.2014.01.010 Saviour, 2023, Numerical evaluations of an uncemented acetabular component in total hip arthroplasty: effects of loading and interface conditions, J. Biomech. Eng., 145, 10.1115/1.4055760 Calvo-Echenique, 2019, Numerical simulations of bone remodelling and formation following nucleotomy, J. Biomech., 88, 138, 10.1016/j.jbiomech.2019.03.034 Chen, 2001, Stress analysis of the disc adjacent to Interbody Fusion in lumbar spine, Med. Eng. Phys., 23, 485, 10.1016/S1350-4533(01)00076-5 Talukdar, 2021, Numerical analysis of the mechanical behaviour of intact and implanted lumbar functional spinal units: effects of loading and boundary conditions, Proc. Inst. Mech. Eng. H, 235, 792, 10.1177/09544119211008343 Morgan, 2001, Dependence of yield strain of human trabecular bone on anatomic site, J. Biomech., 34, 569, 10.1016/S0021-9290(01)00011-2 Taddei, 2004, An improved method for the automatic mapping of computed tomography numbers onto finite element models, Med. Eng. Phys., 26, 61, 10.1016/S1350-4533(03)00138-3 Ghosh, 2013, Bone remodeling around uncemented metallic and ceramic acetabular components, Proc. Inst. Mech. Eng. Part H: J. Eng. Med., 227, 490, 10.1177/0954411913478703 Tsuang, 2009, Comparison of cage application modality in posterior lumbar interbody fusion with posterior instrumentation—a finite element study, Med. Eng. Phys., 31, 565, 10.1016/j.medengphy.2008.11.012 Galbusera, 2011, Lumbar Interbody Fusion: a parametric investigation of a novel cage design with and without posterior instrumentation, Eur. Spine J., 21, 455, 10.1007/s00586-011-2014-0 Moussa, 2020, Topology optimization of 3D-printed structurally porous cage for acetabular reinforcement in total hip arthroplasty, J. Mech. Behav. Biomed. Mater., 105, 10.1016/j.jmbbm.2020.103705 Patwardhan, 1999, A follower load increases the load-carrying capacity of the lumbar spine in compression, Spine, 24, 1003, 10.1097/00007632-199905150-00014 Rohlmann, 2001, Influence of a follower load on intradiscal pressure and intersegmental rotation of the lumbar spine, Spine, 26, E557, 10.1097/00007632-200112150-00014 Choi, 2017, Biomechanical effects of the geometry of ball-and-socket artificial disc on lumbar spine: a finite element study, Spine, 42, E332, 10.1097/BRS.0000000000001789 Weinans, 1993, Adaptive bone remodeling around bonded noncemented total hip arthroplasty: a comparison between animal experiments and Computer Simulation, J. Orthop. Res., 11, 500, 10.1002/jor.1100110405 Huiskes, 1995, Preclinical testing of total hip stems: the effects of coating placement, Clin. Orthop. Relat. Res., 319, 64 Huiskes, 1992, The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials, Clin. Orthop. Relat. Res., 274, 124, 10.1097/00003086-199201000-00014 Martin, 1984, Porosity and specific surface of bone, Crit. Rev. Biomed. Eng., 10, 179 Suárez, 2011, Bone remodelling around a cementless glenoid component, Biomech. Model. Mechanobiol., 11, 903, 10.1007/s10237-011-0360-9 Hoffman, 1967, The brittle strength of orthotropic materials, J. Compos. Mater., 1, 200, 10.1177/002199836700100210 Huiskes, 1993, Failed innovation in total hip replacement. Diagnosis and proposals for a cure, Acta Orthop. Scand., 64, 699, 10.3109/17453679308994602 Kaplan, 1985, Tensile strength of bovine trabecular bone, J. Biomech., 18, 723, 10.1016/0021-9290(85)90027-2 Liu, 2008, Bone ingrowth into a porous-coated implant predicted by a mechano-regulatory tissue differentiation algorithm, Biomech. Model. Mechanobiol., 7, 335, 10.1007/s10237-007-0100-3 Pilliar, 1986, Observations on the effect of movement on bone ingrowth into porous-surfaced implants, Clin. Orthop. Relat. Res., 208, 108, 10.1097/00003086-198607000-00023 Shirazi-Adl, 1994, Biomechanics of the lumbar spine in sagittal/lateral moments, Spine, 19, 2407, 10.1097/00007632-199411000-00007 Hadley, 1961, Anatomico-roentgenographic studies of the posterior spinal articulations, Am. J. Roentgenol. Radium Ther. Nucl. Med., 86, 270 Inoue N, 2019, Biomechanics of the lumbar facet joint, Spine Surg Relat Res, 4, 1, 10.22603/ssrr.2019-0017 Jaumard, 2011, Spinal facet joint biomechanics and mechanotransduction in normal, injury and degenerative conditions, J. Biomech. Eng., 133, 10.1115/1.4004493 Du, 2016, Biomechanical response of lumbar facet joints under follower preload: a finite element study, BMC Muscoskel. Disord., 17, 126, 10.1186/s12891-016-0980-4 Wang, 2011, Is greater lumbar vertebral BMD associated with more disk degeneration? A study using μCT and discography, J. Bone Miner. Res., 26, 2785, 10.1002/jbmr.476 Pye, 2006, Radiographic features of lumbar disc degeneration and bone mineral density in men and women, Ann. Rheum. Dis., 65, 234, 10.1136/ard.2005.038224 Xu, 2017, Lumbar spine finite element model for healthy subjects: development and validation, Comput. Methods Biomech. Biomed. Eng., 20, 1, 10.1080/10255842.2016.1193596 Wang, 2023, The role of multifidus in the biomechanics of lumbar spine: a musculoskeletal modeling study, Bioengineering, 10, 67, 10.3390/bioengineering10010067