Biofunctionalized 3D printed structures for biomedical applications: A critical review of recent advances and future prospects

Murphy, 2014, 3D bioprinting of tissues and organs, Nat Biotechnol, 32, 773, 10.1038/nbt.2958 Albanna, 2019, In situ bioprinting of autologous skin cells accelerates wound healing of extensive excisional full-thickness wounds, Sci Rep, 9, 1, 10.1038/s41598-018-38366-w Li, 2020, Design of biodegradable, implantable devices towards clinical translation, Nat Rev Mater, 5, 61, 10.1038/s41578-019-0150-z Zhang, 2020, Surface modification of titanium and titanium alloys: technologies, developments, and future interests, Adv Eng Mater, 22, 1901258, 10.1002/adem.201901258 Gupta, 2019, Cell-based biosensors: recent trends, challenges and future perspectives, Biosens Bioelectron, 141, 10.1016/j.bios.2019.111435 Amoli, 2020, Ionic tactile sensors for emerging human-interactive technologies: a review of recent progress, Adv Funct Mater, 30, 1904532, 10.1002/adfm.201904532 Cesewski, 2020, Electrochemical biosensors for pathogen detection, Biosens Bioelectron, 159, 10.1016/j.bios.2020.112214 Sehit, 2020, Significance of nanomaterials in electrochemical glucose sensors: an updated review (2016–2020), Biosens Bioelectron, 159, 10.1016/j.bios.2020.112165 Zhu, 2020, Recent advances in lab-on-a-chip technologies for viral diagnosis, Biosens Bioelectron, 153, 10.1016/j.bios.2020.112041 Lin, 2022, Soft wearable devices for deep-tissue sensing, Nat Rev Mater, 1 Wang, 2020, Cell membrane biomimetic nanoparticles for inflammation and cancer targeting in drug delivery, Biomater Sci, 8, 552, 10.1039/C9BM01392J Jian, 2021, Biomimetic anti-freezing polymeric hydrogels: keeping soft-wet materials active in cold environments, Mater Horiz, 8, 351, 10.1039/D0MH01029D Bandyopadhyay, 2021, Nature-inspired materials and structures using 3D Printing, Mater Sci Eng R Rep, 145, 10.1016/j.mser.2021.100609 Song, 2020, Materials for flexible bioelectronic systems as chronic neural interfaces, Nat Mater, 19, 590, 10.1038/s41563-020-0679-7 Su, 2021, Muscle fibers inspired high-performance piezoelectric textiles for wearable physiological monitoring, Adv Funct Mater, 31, 2010962, 10.1002/adfm.202010962 Chen, 2020, Flexible inorganic bioelectronics, npj Flex Electron, 4, 1, 10.1038/s41528-020-0065-1 Chapman, 2018, Industrial applications of enzymes: recent advances, techniques, and outlooks, Catalysts, 8, 238, 10.3390/catal8060238 DiCosimo, 2013, Industrial use of immobilized enzymes, Chem Soc Rev, 42, 6437, 10.1039/c3cs35506c Selim, 2020, Progress in biomimetic leverages for marine antifouling using nanocomposite coatings, J Mater Chem B, 8, 3701, 10.1039/C9TB02119A Sun, 2020, Nanocomposite hydrogel-based strain and pressure sensors: a review, J Mater Chem A, 8, 18605, 10.1039/D0TA06965E Wang, 2020, Recent advances in the development of electrochemical aptasensors for detection of heavy metals in food, Biosens Bioelectron, 147, 10.1016/j.bios.2019.111777 Ramachandraiah, 2021, Potential development of sustainable 3d-printed meat analogues: a review, Sustainability, 13, 938, 10.3390/su13020938 Seoane-Viaño, 2021, Semi-solid extrusion 3D printing in drug delivery and biomedicine: personalised solutions for healthcare challenges, J Control Release, 332, 367, 10.1016/j.jconrel.2021.02.027 Seoane-Viaño, 2021, Translating 3D printed pharmaceuticals: from hype to real-world clinical applications, Adv Drug Deliv Rev, 174, 553, 10.1016/j.addr.2021.05.003 Bose, 2018, Surface modification of biomaterials and biomedical devices using additive manufacturing, Acta Biomater, 66, 6, 10.1016/j.actbio.2017.11.003 Derakhshanfar, 2018, 3D bioprinting for biomedical devices and tissue engineering: a review of recent trends and advances, Bioact Mater, 3, 144, 10.1016/j.bioactmat.2017.11.008 Tetsworth, 2017, Putting 3D modelling and 3D printing into practice: virtual surgery and preoperative planning to reconstruct complex post-traumatic skeletal deformities and defects, Sicot-j, 3, 10.1051/sicotj/2016043 Maleki, 2021, Surface post-treatments for metal additive manufacturing: progress, challenges, and opportunities, Addit Manuf, 37 Ryan, 2021, Future of additive manufacturing: overview of 4D and 3D printed smart and advanced materials and their applications, Chem Eng J, 403, 10.1016/j.cej.2020.126162 Xu, 2021, Vat photopolymerization 3D printing for advanced drug delivery and medical device applications, J Control Release, 329, 743, 10.1016/j.jconrel.2020.10.008 Evans, 2012 Vaezi, 2013, Multiple material additive manufacturing–Part 1: a review: this review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials, Virt Phys Prototyping, 8, 19, 10.1080/17452759.2013.778175 Vaezi, 2013, A review on 3D micro-additive manufacturing technologies, Int J Adv Manuf Technol, 67, 1721, 10.1007/s00170-012-4605-2 Thompson, 2016, Design for additive manufacturing: trends, opportunities, considerations, and constraints, CIRP Ann, 65, 737, 10.1016/j.cirp.2016.05.004 Berman, 2012, 3-D printing: the new industrial revolution, Bus Horiz, 55, 155, 10.1016/j.bushor.2011.11.003 Schubert, 2014, Innovations in 3D printing: a 3D overview from optics to organs, Br J Ophthalmol, 98, 159, 10.1136/bjophthalmol-2013-304446 T.M. Wong, J. Jin, T.W. Lau, C. Fang, C.H. Yan, K. Yeung, M. To, F. Leung, The use of three-dimensional printing technology in orthopaedic surgery: a review, J Orthop Surg 2017;25(1):2309499016684077. Gibson, 2014 Ligon, 2017, Polymers for 3D printing and customized additive manufacturing, Chem Rev, 117, 10212, 10.1021/acs.chemrev.7b00074 Lim, 2017, Design for additive manufacturing of customized cast with porous shell structures, J Mech Sci Technol, 31, 5477, 10.1007/s12206-017-1042-z Bourell, 2014, The roadmap for additive manufacturing and its impact, 3D Print Addit Manuf, 1, 6, 10.1089/3dp.2013.0002 Pacelli, 2016, Tailoring biomaterial surface properties to modulate host-implant interactions: implication in cardiovascular and bone therapy, J Mater Chem B, 4, 1586, 10.1039/C5TB01686J Bilek, 2014, Biofunctionalization of surfaces by energetic ion implantation: review of progress on applications in implantable biomedical devices and antibody microarrays, Appl Surf Sci, 310, 3, 10.1016/j.apsusc.2014.03.097 Ng, 2019, Print me an organ! Why we are not there yet, Prog Polym Sci, 97, 10.1016/j.progpolymsci.2019.101145 Matai, 2020, Progress in 3D bioprinting technology for tissue/organ regenerative engineering, Biomaterials, 226, 10.1016/j.biomaterials.2019.119536 Levato, 2020, From shape to function: the next step in bioprinting, Adv Mater, 32, 1906423, 10.1002/adma.201906423 Mariani, 2019, Biomaterials: foreign bodies or tuners for the immune response?, Int J Mol Sci, 20, 636, 10.3390/ijms20030636 Coli, 2021, Are marginal bone level changes around dental implants due to infection?, Clin Implant Dent Relat Res, 23, 170, 10.1111/cid.12971 Carnicer-Lombarte, 2021, Foreign body reaction to implanted biomaterials and its impact in nerve neuroprosthetics, Front Bioeng Biotechnol, 271 Ma, 2007, Surface modification and property analysis of biomedical polymers used for tissue engineering, Colloids Surf B: Biointerfaces, 60, 137, 10.1016/j.colsurfb.2007.06.019 Bartolo, 2012, Biomedical production of implants by additive electro-chemical and physical processes, CIRP Ann-Manuf Technol, 61, 635, 10.1016/j.cirp.2012.05.005 Chen, 2008, Biocompatible polymer materials: role of protein–surface interactions, Prog Polym Sci, 33, 1059, 10.1016/j.progpolymsci.2008.07.006 Desmet, 2009, Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review, Biomacromolecules, 10, 2351, 10.1021/bm900186s Ganesan, 2010, Multicomponent protein patterning of material surfaces, J Mater Chem, 20, 7322, 10.1039/b926690a Kasemo, 2002, Biological surface science, Surf Sci, 500, 656, 10.1016/S0039-6028(01)01809-X Alves, 2014, Mini-review: antimicrobial peptides and enzymes as promising candidates to functionalize biomaterial surfaces, Biofouling, 30, 483, 10.1080/08927014.2014.889120 Ekladious, 2019, Polymer–drug conjugate therapeutics: advances, insights and prospects, Nat Rev Drug Discov, 18, 273, 10.1038/s41573-018-0005-0 Rodrigues, 2019, Immobilization of lipases on hydrophobic supports: immobilization mechanism, advantages, problems, and solutions, Biotechnol Adv, 37, 746, 10.1016/j.biotechadv.2019.04.003 Guisan, 2020 Sheldon, 2020, The Hitchhiker's guide to biocatalysis: recent advances in the use of enzymes in organic synthesis, Chem Sci, 11, 2587, 10.1039/C9SC05746C Tang, 2008, Surface chemistry influences implant biocompatibility, Curr Top Med Chem, 8, 270, 10.2174/156802608783790901 Messina, 2020, Preparation of biomolecule-polymer conjugates by grafting-from using ATRP, RAFT, or ROMP, Prog Polymr Sci, 100 Stevens, 2005, Exploring and engineering the cell surface interface, Science, 310, 1135, 10.1126/science.1106587 Nel, 2009, Understanding biophysicochemical interactions at the nano–bio interface, Nat Mater, 8, 543, 10.1038/nmat2442 Mertgen, 2020, Multifunctional biomaterials: combining material modification strategies for engineering of cell-contacting surfaces, ACS Appl Mater Interfaces, 12, 21342, 10.1021/acsami.0c01893 Bandyopadhyay, 2022, Translation of 3D printed materials for medical applications, MRS Bull, 1 Moroni, 2018, Biofabrication strategies for 3D in vitro models and regenerative medicine, Nat Rev Mater, 3, 21, 10.1038/s41578-018-0006-y Ozbolat, 2016, Application areas of 3D bioprinting, Drug Discov Today, 21, 1257, 10.1016/j.drudis.2016.04.006 Mandrycky, 2016, 3D bioprinting for engineering complex tissues, Biotechnol Adv, 34, 422, 10.1016/j.biotechadv.2015.12.011 Chia, 2015, Recent advances in 3D printing of biomaterials, J Biol Eng, 9, 4, 10.1186/s13036-015-0001-4 Melchels, 2012, Additive manufacturing of tissues and organs, Prog Polym Sci, 37, 1079, 10.1016/j.progpolymsci.2011.11.007 Ariga, 2019, Layer-by-layer assembly: recent progress from layered assemblies to layered nanoarchitectonics, Chem–Asian J, 14, 2553, 10.1002/asia.201900627 Sheldon, 2018, The limits to biocatalysis: pushing the envelope, Chem Commun, 54, 6088, 10.1039/C8CC02463D Sheldon, 2017, Role of biocatalysis in sustainable chemistry, Chem Rev, 118, 801, 10.1021/acs.chemrev.7b00203 Goddard, 2007, Polymer surface modification for the attachment of bioactive compounds, Prog Polym Sci, 32, 698, 10.1016/j.progpolymsci.2007.04.002 Wang, 2017, 3D printing of polymer matrix composites: a review and prospective, Compos B Eng, 110, 442, 10.1016/j.compositesb.2016.11.034 Frazier, 2014, Metal additive manufacturing: a review, J Mater Eng Perform, 23, 1917, 10.1007/s11665-014-0958-z Duda, 2016, 3D metal printing technology, IFAC-PapersOnLine, 49, 103, 10.1016/j.ifacol.2016.11.111 Eckel, 2016, Additive manufacturing of polymer-derived ceramics, Science, 351, 58, 10.1126/science.aad2688 Kotz, 2017, Three-dimensional printing of transparent fused silica glass, Nature, 544, 337, 10.1038/nature22061 Paul, 2018, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Arch Civ Mech Eng, 18, 311, 10.1016/j.acme.2017.02.008 Fu, 2017, Progress in 3D printing of carbon materials for energy-related applications, Adv Mater, 29, 10.1002/adma.201603486 Li, 2016, Big area additive manufacturing of high performance bonded NdFeB magnets, Sci Rep, 6, 36212, 10.1038/srep36212 Kong, 2014, 3D printed quantum dot light-emitting diodes, Nano Lett, 14, 7017, 10.1021/nl5033292 Leigh, 2012, A simple, low-cost conductive composite material for 3D printing of electronic sensors, PLoS One, 7, e49365, 10.1371/journal.pone.0049365 Chepelev, 2018, Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios, 3D Print Med, 4, 1, 10.1186/s41205-018-0030-y I.O.f. Standardization, Additive manufacturing: general principles. Part. 2: overview of process categories and feedstock, ISO; 2015. Hochleitner, 2015, Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing, Biofabrication, 7, 10.1088/1758-5090/7/3/035002 Liu, 2020, Bioinspired scaffolds with hierarchical structures for tailored mechanical behaviour and cell migration, Ceram Int, 46, 24102, 10.1016/j.ceramint.2020.06.189 Truong, 2022, Current perspectives for engineering antimicrobial nanostructured materials, Curr Opin Biomed Eng, 10.1016/j.cobme.2022.100399 Go, 2017, Fast desktop-scale extrusion additive manufacturing, Addit Manuf, 18, 276 Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B: Eng 2018. Terzaki, 2013, Pre-osteoblastic cell response on three-dimensional, organic-inorganic hybrid material scaffolds for bone tissue engineering, J Biomed Mater Res A, 101, 2283, 10.1002/jbm.a.34516 Sinha R, Cámara-Torres M, Scopece P, Falzacappa E.V, Patelli A, Moroni L, Mota C. A hybrid additive manufacturing platform to create bulk and surface composition gradients on scaffolds for tissue regeneration. bioRxiv 2020. Arabnejad, 2017, Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty, J Orthop Res, 35, 1774, 10.1002/jor.23445 Gungor-Ozkerim, 2018, Bioinks for 3D bioprinting: an overview, Biomater Sci, 6, 915, 10.1039/C7BM00765E Groll, 2018, A definition of bioinks and their distinction from biomaterial inks, Biofabrication, 11, 10.1088/1758-5090/aaec52 Turnbull, 2018, 3D bioactive composite scaffolds for bone tissue engineering, Bioact Mater, 3, 278, 10.1016/j.bioactmat.2017.10.001 Zhang, 2019, Three-dimensional (3D) printed scaffold and material selection for bone repair, Acta Biomater, 84, 16, 10.1016/j.actbio.2018.11.039 Jammalamadaka, 2018, Recent advances in biomaterials for 3D printing and tissue engineering, J Funct Biomater, 9, 22, 10.3390/jfb9010022 Norotte, 2009, Scaffold-free vascular tissue engineering using bioprinting, Biomaterials, 30, 5910, 10.1016/j.biomaterials.2009.06.034 Badylak, 2009, Extracellular matrix as a biological scaffold material: structure and function, Acta Biomater, 5, 1, 10.1016/j.actbio.2008.09.013 Pati, 2014, Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink, Nat Commun, 5, 1, 10.1038/ncomms4935 Kolesky, 2016, Three-dimensional bioprinting of thick vascularized tissues, Proc Natl Acad Sci, 113, 3179, 10.1073/pnas.1521342113 Kolesky, 2014, 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv Mater, 26, 3124, 10.1002/adma.201305506 Miri, 2019, Multiscale bioprinting of vascularized models, Biomaterials, 198, 204, 10.1016/j.biomaterials.2018.08.006 Kuang, 2019, Advances in 4D printing: materials and applications, Adv Funct Mater, 29, 1805290, 10.1002/adfm.201805290 Gudapati, 2016, A comprehensive review on droplet-based bioprinting: past, present and future, Biomaterials, 102, 20, 10.1016/j.biomaterials.2016.06.012 Nai, 2018, From axenic to mixed cultures: technological advances accelerating a paradigm shift in microbiology, Trends Microbiol, 26, 538, 10.1016/j.tim.2017.11.004 Huang, 2018, Bioprinting living biofilms through optogenetic manipulation, ACS Synth Biol, 7, 1195, 10.1021/acssynbio.8b00003 Agarwala, 2018, A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform, Biosens Bioelectron, 102, 365, 10.1016/j.bios.2017.11.039 Derr, 2019, Fully three-dimensional bioprinted skin equivalent constructs with validated morphology and barrier function, Tissue Eng Part C Methods, 25, 334, 10.1089/ten.tec.2018.0318 Lee, 2019, 3D bioprinting of collagen to rebuild components of the human heart, Science, 365, 482, 10.1126/science.aav9051 Attalla, 2018, 3D bioprinting of heterogeneous bi-and tri-layered hollow channels within gel scaffolds using scalable multi-axial microfluidic extrusion nozzle, Biofabrication, 11, 10.1088/1758-5090/aaf7c7 Maduraiveeran, 2018, Electrochemical sensor and biosensor platforms based on advanced nanomaterials for biological and biomedical applications, Biosens Bioelectron, 103, 113, 10.1016/j.bios.2017.12.031 Karimi-Maleh, 2019, Electrochemical sensors, a bright future in the fabrication of portable kits in analytical systems, Chem Rec Kim, 2019, Wearable biosensors for healthcare monitoring, Nat Biotechnol, 37, 389, 10.1038/s41587-019-0045-y Yang, 2019, Wearable and flexible electronics for continuous molecular monitoring, Chem Soc Rev, 48, 1465, 10.1039/C7CS00730B Zhong, 2018, Self-assembly of enzyme-like nanofibrous G-molecular hydrogel for printed flexible electrochemical sensors, Adv Mater, 30, 1706887, 10.1002/adma.201706887 Zhang, 2018, Advances in organ-on-a-chip engineering, Nat Rev Mater, 3, 257, 10.1038/s41578-018-0034-7 Lind, 2017, Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing, Nat Mater, 16, 303, 10.1038/nmat4782 Yi, 2019, A bioprinted human-glioblastoma-on-a-chip for the identification of patient-specific responses to chemoradiotherapy, Nat Biomed Eng, 3, 509, 10.1038/s41551-019-0363-x LaRosa, 2011, Outcomes in pediatric solid-organ transplantation, Pediatr Transplant, 15, 128, 10.1111/j.1399-3046.2010.01434.x W.H. Organization. Global observatory on donation and transplantation; 2017. Skylar-Scott, 2019, Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels, Sci Adv, 5, eaaw2459, 10.1126/sciadv.aaw2459 Albrektsson, 2018, Foreign body reactions, marginal bone loss and allergies in relation to titanium implants, Eur J Oral Implantol, 11 Trindade, 2018, Osseointegration and foreign body reaction: titanium implants activate the immune system and suppress bone resorption during the first 4 weeks after implantation, Clin Implant Dent Relat Res, 20, 82, 10.1111/cid.12578 Yue, 2015, Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels, Biomaterials, 73, 254, 10.1016/j.biomaterials.2015.08.045 Chan, 1996, Polymer surface modification by plasmas and photons, Surf Sci Rep, 24, 1, 10.1016/0167-5729(96)80003-3 Chu, 2002, Plasma-surface modification of biomaterials, Mater Sci Eng R Rep, 36, 143, 10.1016/S0927-796X(02)00004-9 Anderson JM, Rodriguez A, Chang DT. Foreign body reaction to biomaterials. In: Seminars in immunology. Elsevier; 2008. p. 86–100. Akhavan, 2018, Plasma activated coatings with dual action against fungi and bacteria, Appl Mater Today, 12, 72, 10.1016/j.apmt.2018.04.003 Makhneva, 2020, Functional plasma polymerized surfaces for biosensing, ACS Appl Mater Interfaces, 12, 17100, 10.1021/acsami.0c01443 Mussano, 2017, In vitro characterization of two different atmospheric plasma jet chemical functionalizations of titanium surfaces, Appl Surf Sci, 409, 314, 10.1016/j.apsusc.2017.02.035 Yassin, 2019, 3D and Porous RGDC-Functionalized Polyester-Based Scaffolds as a Niche to Induce Osteogenic Differentiation of Human Bone Marrow Stem Cells, Macromol Biosci, 19, 1900049, 10.1002/mabi.201900049 Campiglio, 2020, Bottom-up engineering of cell-laden hydrogel microfibrous patch for guided tissue regeneration, Mater Sci Eng C, 108, 10.1016/j.msec.2019.110488 Wong KU, Zhang A, Akhavan B, Bilek MM, Yeo GC. Biomimetic culture strategies for the clinical expansion of mesenchymal stromal cells. ACS Biomater Sci Eng 2021. Lin, 2019, Biofunctions of antimicrobial peptide-conjugated alginate/hyaluronic acid/collagen wound dressings promote wound healing of a mixed-bacteria-infected wound, Int J Biol Macromol, 140, 330, 10.1016/j.ijbiomac.2019.08.087 Cheng, 2019, Controlled Co-delivery of growth factors through layer-by-layer assembly of core–shell nanofibers for improving bone regeneration, ACS Nano, 13, 6372, 10.1021/acsnano.8b06032 Zhou, 2018, Electrostatic interactions in protein structure, folding, binding, and condensation, Chem Rev, 118, 1691, 10.1021/acs.chemrev.7b00305 Sheldon, 2018, Role of biocatalysis in sustainable chemistry, Chem Rev, 118, 801, 10.1021/acs.chemrev.7b00203 Koshland, 1995, The key–lock theory and the induced fit theory, Angew Chem Int Ed Eng, 33, 2375, 10.1002/anie.199423751 Maria-Solano, 2018, Role of conformational dynamics in the evolution of novel enzyme function, Chem Commun, 54, 6622, 10.1039/C8CC02426J Liljas, 2016 Wilson, 2005, Mediation of biomaterial–cell interactions by adsorbed proteins: a review, Tissue Eng, 11, 1, 10.1089/ten.2005.11.1 Jain, 2005, Engineering vascularized tissue, Nat Biotechnol, 23, 821, 10.1038/nbt0705-821 Stewart, 2019, A review of biomimetic surface functionalization for bone-integrating orthopedic implants: mechanisms, current approaches, and future directions, Prog Mater Sci, 10.1016/j.pmatsci.2019.100588 Chng, 2019, Adhesion of electrosprayed chitosan coatings using silane surface chemistry, Thin Solid Films, 692, 10.1016/j.tsf.2019.137454 Siow, 2006, Plasma methods for the generation of chemically reactive surfaces for biomolecule immobilization and cell colonization-a review, Plasma Processes Polym, 3, 392, 10.1002/ppap.200600021 Bilek, 2011, Free radical functionalization of surfaces to prevent adverse responses to biomedical devices, Proc Natl Acad Sci, 108, 14405, 10.1073/pnas.1103277108 Kondyurin, 2018, Plasma ion implantation of silk biomaterials enabling direct covalent immobilization of bioactive agents for enhanced cellular responses, ACS Appl Mater Interfaces, 10, 17605, 10.1021/acsami.8b03182 Lukowski, 2019, Renewable nano-structured coatings on medical devices prevent the transmission of clinically relevant pathogens, Surf Coat Technol, 366, 227, 10.1016/j.surfcoat.2019.02.066 Alavi, 2020, Atmospheric pressure plasma jet treatment of polymers enables reagent-free covalent attachment of biomolecules for bioprinting, ACS Appl Mater Interfaces, 10.1021/acsami.0c07169 Bilek, 2020, Plasma treatment in air at atmospheric pressure that enables reagent-free covalent immobilization of biomolecules on polytetrafluoroethylene (PTFE), Appl Surf Sci, 10.1016/j.apsusc.2020.146128 Starke, 2013, A novel electron beam-based method for the immobilization of trypsin on poly (ethersulfone) and poly (vinylidene fluoride) membranes, React Funct Polym, 73, 698, 10.1016/j.reactfunctpolym.2013.02.013 Schmidt, 2018, Polymer membranes for active degradation of complex fouling mixtures, J Membr Sci, 563, 481, 10.1016/j.memsci.2018.06.013 Croes, 2018, Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium, Acta Biomater, 81, 315, 10.1016/j.actbio.2018.09.051 Croes, 2018, Data on a rat infection model to assess porous titanium implant coatings, Data Brief, 21, 1642, 10.1016/j.dib.2018.10.157 Bakhshandeh, 2017, Simultaneous delivery of multiple antibacterial agents from additively manufactured porous biomaterials to fully eradicate planktonic and adherent Staphylococcus aureus, ACS Appl Mater Interfaces, 9, 25691, 10.1021/acsami.7b04950 Dąbrowski, 2001, Adsorption—from theory to practice, Adv Colloid Interface Sci, 93, 135, 10.1016/S0001-8686(00)00082-8 Israelachvili JN. Intermolecular and surface forces. Academic Press; 2011. Levine IN, Busch DH, Shull H. Quantum chemistry. Upper Saddle River, NJ: Pearson Prentice Hall; 2009. Davies, 2013, The roles of different scale ranges of surface implant topography on the stability of the bone/implant interface, Biomaterials, 34, 3535, 10.1016/j.biomaterials.2013.01.024 Pritchard, 1955, The concept of electronegativity, Chem Rev, 55, 745, 10.1021/cr50004a005 Riedel E, Meyer H-J. Allgemeine und anorganische Chemie. de Gruyter; 2018. Larson, 1984, Gas-phase bihalide and pseudobihalide ions. An ion cyclotron resonance determination of hydrogen bond energies in XHY-species (X, Y= F, Cl, Br, CN), Inorg Chem, 23, 2029, 10.1021/ic00182a010 Mohamad, 2015, An overview of technologies for immobilization of enzymes and surface analysis techniques for immobilized enzymes, Biotechnol Biotechnol Equip, 29, 205, 10.1080/13102818.2015.1008192 Frahs, 2019, Prechondrogenic ATDC5 cell attachment and differentiation on graphene foam; modulation by surface functionalization with fibronectin, ACS Appl Mater Interfaces, 11, 41906, 10.1021/acsami.9b14670 Xu, 2019, Optimization of electrospray fabrication of stem cell–embedded alginate–gelatin microspheres and their assembly in 3D-printed poly (ε-caprolactone) scaffold for cartilage tissue engineering, J Orthop Transl, 18, 128 Mohanty, 2016, 3D printed silicone–hydrogel scaffold with enhanced physicochemical properties, Biomacromolecules, 17, 1321, 10.1021/acs.biomac.5b01722 van der Stok, 2015, Full regeneration of segmental bone defects using porous titanium implants loaded with BMP-2 containing fibrin gels, Eur Cell Mater, 2015, 141, 10.22203/eCM.v029a11 Van Der Stok, 2015, Osteostatin-coated porous titanium can improve early bone regeneration of cortical bone defects in rats, Tissue Eng A, 21, 1495, 10.1089/ten.tea.2014.0476 van der Stok, 2013, Enhanced bone regeneration of cortical segmental bone defects using porous titanium scaffolds incorporated with colloidal gelatin gels for time-and dose-controlled delivery of dual growth factors, Tissue Eng A, 19, 2605, 10.1089/ten.tea.2013.0181 Rashad, 2018, Coating 3D printed polycaprolactone scaffolds with nanocellulose promotes growth and differentiation of mesenchymal stem cells, Biomacromolecules, 19, 4307, 10.1021/acs.biomac.8b01194 Chatzinikolaidou, 2017, Recombinant human bone morphogenetic protein 2 (rhBMP-2) immobilized on laser-fabricated 3D scaffolds enhance osteogenesis, Colloids Surf B: Biointerfaces, 149, 233, 10.1016/j.colsurfb.2016.10.027 Woodruff, 2010, The return of a forgotten polymer—Polycaprolactone in the 21st century, Prog Polym Sci, 35, 1217, 10.1016/j.progpolymsci.2010.04.002 Ariga, 2014, Layer-by-layer nanoarchitectonics: invention, innovation, and evolution, Chem Lett, 43, 36, 10.1246/cl.130987 Yavari, 2020, Layer by layer coating for bio-functionalization of additively manufactured meta-biomaterials, Addit Manuf, 32 Min, 2016, Designer dual therapy nanolayered implant coatings eradicate biofilms and accelerate bone tissue repair, ACS Nano, 10, 4441, 10.1021/acsnano.6b00087 Xue, 2019, Electrospinning and electrospun nanofibers: methods, materials, and applications, Chem Rev, 119, 5298, 10.1021/acs.chemrev.8b00593 Parham, 2020, Electrospun nano-fibers for biomedical and tissue engineering applications: a comprehensive review, Materials, 13, 2153, 10.3390/ma13092153 Jeckson, 2021, Delivery of therapeutics from layer-by-layer electrospun nanofiber matrix for wound healing: an update, J Pharm Sci, 110, 635, 10.1016/j.xphs.2020.10.003 Yoo, 2009, Surface-functionalized electrospun nanofibers for tissue engineering and drug delivery, Adv Drug Deliv Rev, 61, 1033, 10.1016/j.addr.2009.07.007 Hai, 2019, Electrospun lipid-coated medicated nanocomposites for an improved drug sustained-release profile, Mater Des, 162, 70, 10.1016/j.matdes.2018.11.036 Bhattarai, 2019, Biomedical applications of electrospun nanofibers: drug and nanoparticle delivery, Pharmaceutics, 11, 5, 10.3390/pharmaceutics11010005 Lee, 2020, Integrating cold atmospheric plasma with 3D printed bioactive nanocomposite scaffold for cartilage regeneration, Mater Sci Eng C, 111, 10.1016/j.msec.2020.110844 Credi, 2018, Biotinylated photopolymers for 3D-printed unibody lab-on-a-chip optical platforms, Small, 14, 10.1002/smll.201702831 Yang, 2018, Dual-functional 3D-printed composite scaffold for inhibiting bacterial infection and promoting bone regeneration in infected bone defect models, Acta Biomater, 79, 265, 10.1016/j.actbio.2018.08.015 Yang, 2016, Anti-infective efficacy, cytocompatibility and biocompatibility of a 3D-printed osteoconductive composite scaffold functionalized with quaternized chitosan, Acta Biomater, 46, 112, 10.1016/j.actbio.2016.09.035 Gorgin Karaji, 2017, Additively manufactured and surface biofunctionalized porous nitinol, ACS Appl Mater Interfaces, 9, 1293, 10.1021/acsami.6b14026 Zhang, 2019, Immobilization of BMP-2-derived peptides on 3D-printed porous scaffolds for enhanced osteogenesis, Biomed Mater, 15, 10.1088/1748-605X/ab4c78 Chen, 2019, A three-dimensional (3D) printed biomimetic hierarchical scaffold with a covalent modular release system for osteogenesis, Mater Sci Eng C, 104, 10.1016/j.msec.2019.109842 Di Luca, 2017, Covalent binding of bone morphogenetic protein-2 and transforming growth factor-β3 to 3D plotted scaffolds for osteochondral tissue regeneration, Biotechnol J, 12, 10.1002/biot.201700072 Chouirfa, 2019, Review of titanium surface modification techniques and coatings for antibacterial applications, Acta Biomater, 83, 37, 10.1016/j.actbio.2018.10.036 Tsuchikama, 2018, Antibody-drug conjugates: recent advances in conjugation and linker chemistries, Protein Cell, 9, 33, 10.1007/s13238-016-0323-0 Jain, 2015, Current ADC linker chemistry, Pharm Res, 32, 3526, 10.1007/s11095-015-1657-7 Guillier, 2000, Linkers and cleavage strategies in solid-phase organic synthesis and combinatorial chemistry, Chem Rev, 100, 2091, 10.1021/cr980040+ Jiang, 2013, Biomolecule-functionalized polymer brushes, Chem Soc Rev, 42, 3394, 10.1039/c2cs35453e Keselowsky, 2004, Surface chemistry modulates focal adhesion composition and signaling through changes in integrin binding, Biomaterials, 25, 5947, 10.1016/j.biomaterials.2004.01.062 Curran, 2006, The guidance of human mesenchymal stem cell differentiation in vitro by controlled modifications to the cell substrate, Biomaterials, 27, 4783, 10.1016/j.biomaterials.2006.05.001 Chen, 2015, Pendant small functional groups on poly (∊-caprolactone) substrate modulate adhesion, proliferation and differentiation of human mesenchymal stem cells, Colloids Surf B: Biointerfaces, 134, 322, 10.1016/j.colsurfb.2015.07.018 Tsakos, 2015, Ester coupling reactions–an enduring challenge in the chemical synthesis of bioactive natural products, Nat Prod Rep, 32, 605, 10.1039/C4NP00106K Book, 2014, Compendium of chemical terminology, International Union of, Pure Appl Chem, 528 Liebscher, 2019, Chemistry of polydopamine–scope, variation, and limitation, Eur J Org Chem, 2019, 4976, 10.1002/ejoc.201900445 Lee, 2007, Mussel-inspired surface chemistry for multifunctional coatings, Science, 318, 426, 10.1126/science.1147241 Wadood, 2016, Brief overview on nitinol as biomaterial, Adv Mater Sci Eng, 2016, 10.1155/2016/4173138 Hernandez, 2016, Functionalizing micro-3D-printed protein hydrogels for cell adhesion and patterning, J Mater Chem B, 4, 1818, 10.1039/C5TB02070K Bertlein, 2019, Permanent hydrophilization and generic bioactivation of melt electrowritten scaffolds, Adv Healthc Mater, 8, 1801544, 10.1002/adhm.201801544 Dinca, 2009, 2D and 3D biotin patterning by ultrafast lasers, Int J Nanotechnol, 6, 88, 10.1504/IJNT.2009.021709 Becerra, 2010, Articular cartilage: structure and regeneration, Tissue Eng B Rev, 16, 617, 10.1089/ten.teb.2010.0191 Hong, 2020, Plasma-digital nexus: plasma nanotechnology for the digital manufacturing age, Rev Mod Plasma Phys, 4, 1, 10.1007/s41614-019-0039-8 Adamovich, 2017, The 2017 Plasma Roadmap: low temperature plasma science and technology, J Phys D: Appl Phys, 50, 10.1088/1361-6463/aa76f5 Denes, 2004, Macromolecular plasma-chemistry: an emerging field of polymer science, Prog Polym Sci, 29, 815, 10.1016/j.progpolymsci.2004.05.001 Kong, 2009, Plasma medicine: an introductory review, New J Phys, 11, 10.1088/1367-2630/11/11/115012 Bekeschus, 2019, White paper on plasma for medicine and hygiene: future in plasma health sciences, Plasma Processes Polym, 16, 1800033, 10.1002/ppap.201800033 Lu, 2016, Reactive species in non-equilibrium atmospheric-pressure plasmas: generation, transport, and biological effects, Phys Rep, 630, 1, 10.1016/j.physrep.2016.03.003 Harley J, Suchowerska N, Lo H, Choong ES, McKenzie D. Gas plasma-activated liquid inhibits cancer: a new take on radiation therapy. Asia-Pacific J Clin Oncol 2021:66–7. Li, 2019, Decorating 3D printed scaffolds with electrospun nanofiber segments for tissue engineering, Adv Biosyst, 3 Delalat, 2017, 3D printed lattices as an activation and expansion platform for T cell therapy, Biomaterials, 140, 58, 10.1016/j.biomaterials.2017.05.009 Croes, 2020, A multifaceted biomimetic interface to improve the longevity of orthopedic implants, Acta Biomater, 110, 266, 10.1016/j.actbio.2020.04.020 Berneel, 2012, Double protein-coated poly-ε-caprolactone scaffolds: successful 2D to 3D transfer, J Biomed Mater Res A, 100, 1783, 10.1002/jbm.a.34125 Cámara-Torres, 2021, Tuning cell behavior on 3D scaffolds fabricated by atmospheric plasma-assisted additive manufacturing, ACS Appl Mater Interfaces, 13, 3631, 10.1021/acsami.0c19687 Maffei, 2020, An atmospheric pressure plasma jet to tune the bioactive peptide coupling to polycaprolactone electrospun layers, Appl Surf Sci, 507, 10.1016/j.apsusc.2019.144713 Dolci, 2016, Antibody immobilization on poly (L-lactic acid) nanofibers advantageously carried out by means of a non-equilibrium atmospheric plasma process, J Phys D: Appl Phys, 49, 10.1088/0022-3727/49/27/274003 Langmuir, 1928, Oscillations in ionized gases, PNAS, 14, 627, 10.1073/pnas.14.8.627 Tonks, 1967, The birth of “Plasma”, Am J Phys, 35, 857, 10.1119/1.1974266 Chen FF, Smith MD. Plasma. Van Nostrand's scientific encyclopedia; 1984. Tendero, 2006, Atmospheric pressure plasmas: a review, Spectrochim Acta B At Spectrosc, 61, 2, 10.1016/j.sab.2005.10.003 Khelifa, 2016, Free-radical-induced grafting from plasma polymer surfaces, Chem Rev, 116, 3975, 10.1021/acs.chemrev.5b00634 Bruggeman, 2017, Foundations of atmospheric pressure non-equilibrium plasmas, Plasma Sources Sci Technol, 26, 10.1088/1361-6595/aa97af Müller, 2008, Electron–ion collisions: fundamental processes in the focus of applied research, Adv At Mol Opt Phys, 55, 293, 10.1016/S1049-250X(07)55006-8 Deltuva, 2008, Nuclear many-body scattering calculations with the Coulomb interaction, Annu Rev Nucl Part Sci, 58, 27, 10.1146/annurev.nucl.58.110707.171203 Pham, 2022, Strontium-doped hardystonite plasma sprayed coatings with robust antimicrobial activity, Mater Today Chem, 24 Pham, 2022, Antibacterial longevity of a novel gallium liquid metal/hydroxyapatite composite coating fabricated by plasma spray, ACS Appl Mater Interfaces, 14, 18974, 10.1021/acsami.2c03695 Łatka, 2020, Review of functionally graded thermal sprayed coatings, Appl Sci, 10, 5153, 10.3390/app10155153 Iza, 2008, Microplasmas: sources, particle kinetics, and biomedical applications, Plasma Processes Polym, 5, 322, 10.1002/ppap.200700162 Lu, 2014, Guided ionization waves: theory and experiments, Phys Rep, 540, 123, 10.1016/j.physrep.2014.02.006 Shao, 2018, Atmospheric-pressure pulsed discharges and plasmas: mechanism, characteristics and applications, High Voltage, 3, 14, 10.1049/hve.2016.0014 Kosobrodova, 2020, Covalent biofunctionalization of the inner surfaces of a hollow-fiber capillary bundle using packed-bed plasma ion implantation, ACS Appl Mater Interfaces, 12, 32163, 10.1021/acsami.0c07070 Katsifis, 2020, Quantification of dose in plasma immersion ion implantation of polymer bone scaffolds: probe diagnostics of a pulsed dielectric barrier discharge, Plasma Processes Polym, 17, 10.1002/ppap.202000113 Yasuda HK. Plasma polymerization. Academic Press; 2012. Bitar, 2018, Acrylic acid plasma polymerization for biomedical use, Appl Surf Sci, 448, 168, 10.1016/j.apsusc.2018.04.129 de Oliveira, 2022, Plasma polymerization in the design of new materials: looking through the lens of maleic anhydride plasma polymers, Mater Today Chem, 23 Kruse, 2021, Plasma ion implantation of 3D-printed PEEK creates optimal host conditions for bone on growth and mineralisation, Plasma Processes Polym, 18, 10.1002/ppap.202000219 Rupper, 2017, Composition and stability of plasma polymer films exhibiting vertical chemical gradients, Langmuir, 33, 2340, 10.1021/acs.langmuir.6b04600 Dabare, 2022, Surface chemistry mediated albumin adsorption, conformational changes and influence on innate immune responses, Appl Surf Sci Thierry, 2008, Reactive epoxy-functionalized thin films by a pulsed plasma polymerization process, Langmuir, 24, 10187, 10.1021/la801140u Michl, 2017, Facile single-step bioconjugation of the antifungal agent caspofungin onto material surfaces via an epoxide plasma polymer interlayer, RSC Adv, 7, 27678, 10.1039/C7RA03897F Mason, 2011, Cell therapy industry: billion dollar global business with unlimited potential, Regen Med, 6, 265, 10.2217/rme.11.28 Fesnak, 2016, Engineered T cells: the promise and challenges of cancer immunotherapy, Nat Rev Cancer, 16, 566, 10.1038/nrc.2016.97 Walia, 2020, Hydrogel–solid hybrid materials for biomedical applications enabled by surface-embedded radicals, Adv Funct Mater, 10.1002/adfm.202004599 Martin, 2018, Electric fields control the orientation of peptides irreversibly immobilized on radical-functionalized surfaces, Nat Commun, 9, 357, 10.1038/s41467-017-02545-6 Lau, 2021, Biomimetic silk biomaterials: perlecan-functionalized silk fibroin for use in blood-contacting devices, Acta Biomater, 132, 162, 10.1016/j.actbio.2021.02.014 Tran, 2018, Quantifying plasma immersion ion implantation of insulating surfaces in a dielectric barrier discharge: how to control the dose, Proc R Soc A: Math Phys Eng Sci, 474, 10.1098/rspa.2018.0263 Akhavan, 2018, Direct covalent attachment of silver nanoparticles on radical-rich plasma polymer films for antibacterial applications, J Mater Chem B, 6, 5845, 10.1039/C8TB01363B Akhavan, 2019, Radical-functionalized plasma polymers: stable biomimetic interfaces for bone implant applications, Appl Mater Today, 16, 456, 10.1016/j.apmt.2019.07.002 Stewart, 2018, Multifunctional protein-immobilized plasma polymer films for orthopedic applications, ACS Biomater Sci Eng, 4, 4084, 10.1021/acsbiomaterials.8b00954 Stewart, 2018, Cellular responses to radical propagation from ion-implanted plasma polymer surfaces, Appl Surf Sci, 456, 701, 10.1016/j.apsusc.2018.06.111 Akhavan, 2016, Substrate-regulated growth of plasma-polymerized films on carbide-forming metals, Langmuir, 32, 10835, 10.1021/acs.langmuir.6b02901 Lim, 2013, Latent transforming growth factor-beta1 functionalised electrospun scaffolds promote human cartilage differentiation: towards an engineered cartilage construct, Arch Plast Surg, 40, 676, 10.5999/aps.2013.40.6.676 Ma, 2005, Grafting of gelatin on electrospun poly (caprolactone) nanofibers to improve endothelial cell spreading and proliferation and to control cell orientation, Tissue Eng, 11, 1149, 10.1089/ten.2005.11.1149 Fricke, 2012, Comparison of nonthermal plasma processes on the surface properties of polystyrene and their impact on cell growth, IEEE Trans Plasma Sci, 40, 2970, 10.1109/TPS.2012.2204904 Fanelli, 2017, Atmospheric pressure non-equilibrium plasma jet technology: general features, specificities and applications in surface processing of materials, Surf Coat Technol, 322, 174, 10.1016/j.surfcoat.2017.05.027 Doherty, 2019, Plasma polymerization using helium atmospheric-pressure plasma jet with heptylamine monomer, Plasma Processes Polym, 16, 10.1002/ppap.201800185 Coelho, 2012, Argon-based atmospheric pressure plasma enhances early bone response to rough titanium surfaces, J Biomed Mater Res A, 100, 1901, 10.1002/jbm.a.34127 Afanasenkau, 2020, Rapid prototyping of soft bioelectronic implants for use as neuromuscular interfaces, Nat Biomed Eng, 4, 1010, 10.1038/s41551-020-00615-7 Chen, 2021, Tiny cold atmospheric plasma jet for biomedical applications, Processes, 9, 249, 10.3390/pr9020249 Reuter, 2018, The kINPen—a review on physics and chemistry of the atmospheric pressure plasma jet and its applications, J Phys D: Appl Phys, 51, 10.1088/1361-6463/aab3ad Surucu, 2016, Atmospheric plasma surface modifications of electrospun PCL/chitosan/PCL hybrid scaffolds by nozzle type plasma jets for usage of cell cultivation, Appl Surf Sci, 385, 400, 10.1016/j.apsusc.2016.05.123 Dowling, 2014, Importance of plasma thermal energy transfer for plasma jet systems, IEEE Trans Plasma Sci, 42, 2426, 10.1109/TPS.2014.2326962 Dowling, 2015, Achieving enhanced material finishing using cold plasma treatments, Trans IMF, 93, 119, 10.1179/0020296715Z.000000000240 Donegan, 2013, Protein adhesion on water stable atmospheric plasma deposited acrylic acid coatings, Surf Coat Technol, 234, 53, 10.1016/j.surfcoat.2013.03.002 Ayan, 2011, Development of a cold atmospheric pressure microplasma jet for freeform cell printing, Appl Phys Lett, 99, 10.1063/1.3638062 West, 2007, Microplasma writing for surface-directed millifluidics, Lab Chip, 7, 981, 10.1039/b706788g Shirafuji, 2016, Acquisition of cell-adhesion capability of the surface of crosslinked albumin films irradiated with atmospheric-pressure plasma jets, Jpn J Appl Phys, 55, 07LG03, 10.7567/JJAP.55.07LG03 Motrescu, 2016, Nanocapillary atmospheric pressure plasma jet: a tool for ultrafine maskless surface modification at atmospheric pressure, ACS Appl Mater Interfaces, 8, 12528, 10.1021/acsami.6b02483 Abuzairi, 2016, Maskless localized patterning of biomolecules on carbon nanotube microarray functionalized by ultrafine atmospheric pressure plasma jet using biotin-avidin system, Appl Phys Lett, 109, 10.1063/1.4958988 Akashi, 2014, Protein immobilization onto poly (vinylidene fluoride) microporous membranes activated by the atmospheric pressure low temperature plasma, Polymer, 55, 2780, 10.1016/j.polymer.2014.04.029 Aveyard, 2017, Linker-free covalent immobilization of nisin using atmospheric pressure plasma induced grafting, J Mater Chem B, 5, 2500, 10.1039/C7TB00113D Liu, 2018, User interface tool for a novel plasma-assisted bio-additive extrusion system, Rapid Prototyp J, 24, 368, 10.1108/RPJ-07-2016-0115 Liu, 2018, A plasma-assisted bioextrusion system for tissue engineering, CIRP Ann, 10.1016/j.cirp.2018.04.077 Patelli, 2018, Nanoroughness, surface chemistry, and drug delivery control by atmospheric plasma jet on implantable devices, ACS Appl Mater Interfaces, 10, 39512, 10.1021/acsami.8b15886 Kogelschatz, 2002, Filamentary, patterned, and diffuse barrier discharges, IEEE Trans Plasma Sci, 30, 1400, 10.1109/TPS.2002.804201 Brandenburg, 2017, Dielectric barrier discharges: progress on plasma sources and on the understanding of regimes and single filaments, Plasma Sources Sci Technol, 26, 10.1088/1361-6595/aa6426 Mance, 2018, Atmospheric pressure plasma jet for biomedical applications characterised by passive thermal probe, The European Physical Journal D, 72, 1, 10.1140/epjd/e2018-80768-8 Wang, 2016, Cold atmospheric plasma (CAP) surface nanomodified 3D printed polylactic acid (PLA) scaffolds for bone regeneration, Acta Biomater, 46, 256, 10.1016/j.actbio.2016.09.030 Jonscher, 1977, The ‘universal’ dielectric response, Nature, 267, 673, 10.1038/267673a0 Li, 2019, A review of recent advances of dielectric barrier discharge plasma in catalysis, Nanomaterials, 9, 1428, 10.3390/nano9101428 Da Ponte, 2011, Atmospheric pressure plasma deposition of organic films of biomedical interest, Surf Coat Technol, 205, S525, 10.1016/j.surfcoat.2011.03.112 Walsh, 2008, Contrasting characteristics of linear-field and cross-field atmospheric plasma jets, Appl Phys Lett, 93, 10.1063/1.2982497 Los, 2019, Efficacy of cold plasma for direct deposition of antibiotics as a novel approach for localized delivery and retention of effect, Front Cell Infect Microbiol, 9, 428, 10.3389/fcimb.2019.00428 Bagheri, 2019, Photopolymerization in 3D printing, ACS Appl Polym Mater, 1, 593, 10.1021/acsapm.8b00165 Barradas, 2012, Surface modifications by gas plasma control osteogenic differentiation of MC3T3-E1 cells, Acta Biomater, 8, 2969, 10.1016/j.actbio.2012.04.021 Hartl, 2022, Antimicrobial adhesive films by plasma-enabled polymerisation of m-cresol, Sci Rep, 12, 1, 10.1038/s41598-022-11400-8 Brunengo, 2019, Chemical modification of hemp fibres by plasma treatment for eco-composites based on biodegradable polyester, J Mater Sci, 54, 14367, 10.1007/s10853-019-03932-8 Makhneva, 2019, Maleic anhydride and acetylene plasma copolymer surfaces for SPR immunosensing, Anal Bioanal Chem, 411, 7689, 10.1007/s00216-019-01979-9 Akdoğan, 2006, A new method for immunosensor preparation: atmospheric plasma torch, Surf Coat Technol, 201, 2540, 10.1016/j.surfcoat.2006.04.032 Durán, 2020, Atmospheric pressure cold plasma versus wet-chemical surface treatments for carboxyl functionalization of polylactic acid: a first step toward covalent immobilization of bioactive molecules, Colloids Surf B: Biointerfaces, 189, 10.1016/j.colsurfb.2020.110847 Ainsworth, 2022, Covalent protein immobilization on 3D-printed microfiber meshes for guided cartilage regeneration, Adv Funct Mater Permyakova, 2018, Antibacterial biocompatible PCL nanofibers modified by COOH-anhydride plasma polymers and gentamicin immobilization, Mater Des, 153, 60, 10.1016/j.matdes.2018.05.002 Bakhshandeh, 2018, Electrophoretic deposition: a versatile tool against biomaterial associated infections, J Mater Chem B, 6, 1128, 10.1039/C7TB02445B Gurrappa, 2008, Electrodeposition of nanostructured coatings and their characterization—a review, Sci Technol Adv Mater, 10.1088/1468-6996/9/4/043001 Boccaccini, 2010, Electrophoretic deposition of biomaterials, J R Soc Interface, 7, S581, 10.1098/rsif.2010.0156.focus Reinhardt, 2018, Electron beam immobilization of novel antimicrobial, short peptide motifs leads to membrane surfaces with promising antibacterial properties, J Funct Biomater, 9, 21, 10.3390/jfb9010021 Schmidt, 2021, Radiation-induced graft immobilization (RIGI): covalent binding of non-vinyl compounds on polymer membranes, Polymers, 13, 1849, 10.3390/polym13111849 Zhang, 2018, Additive manufacturing of titanium alloys by electron beam melting: a review, Adv Eng Mater, 20, 10.1002/adem.201700842 Clough, 2001, High-energy radiation and polymers: a review of commercial processes and emerging applications, Nucl Instrum Methods Phys Res, Sect B, 185, 8, 10.1016/S0168-583X(01)00966-1 Kanakaraju, 2018, Advanced oxidation process-mediated removal of pharmaceuticals from water: a review, J Environ Manage, 219, 189, 10.1016/j.jenvman.2018.04.103 Hsiao, 2017, Fundamentals and applications of metasurfaces, Small Methods, 1, 10.1002/smtd.201600064 Mehnert, 1998 RADSYS, Electron beam schematic. https://www.radsys.eu/applications-eb/(Accessed 08/06/2022). Hirsh, 2013, The Vroman effect: competitive protein exchange with dynamic multilayer protein aggregates, Colloids Surf B: Biointerfaces, 103, 395, 10.1016/j.colsurfb.2012.10.039 Vroman, 1969, Findings with the recording ellipsometer suggesting rapid exchange of specific plasma proteins at liquid/solid interfaces, Surf Sci, 16, 438, 10.1016/0039-6028(69)90037-5 Vroman, 1969, Identification of rapid changes at plasma–solid interfaces, J Biomed Mater Res A, 3, 43, 10.1002/jbm.820030106 Kimmich, 2004, Polymer chain dynamics and NMR, NMR• 3D Analysis• Photopolymerization, Springer, 1 Emsley, 1980, Very strong hydrogen bonding, Chem Soc Rev, 9, 91, 10.1039/cs9800900091 Soboyejo W. Mechanical properties of engineered materials. CRC Press; 2002. Wade, 2006 Kolb, 2001, Click chemistry: diverse chemical function from a few good reactions, Angew Chem Int Ed, 40, 2004, 10.1002/1521-3773(20010601)40:11<2004::AID-ANIE2004>3.0.CO;2-5 Schoon, 2019, Diagnosis of metal hypersensitivity in total knee arthroplasty: a case report, Front Immunol, 2758, 10.3389/fimmu.2019.02758 Coad, 2013, Controlled covalent surface immobilisation of proteins and peptides using plasma methods, Surf Coat Technol, 233, 169, 10.1016/j.surfcoat.2013.05.019 Patra, 2018, Nano based drug delivery systems: recent developments and future prospects, J Nanobiotechnol, 16, 1, 10.1186/s12951-018-0392-8 Yoo, 2020, Phenomenology of the initial burst release of drugs from PLGA microparticles, ACS Biomater Sci Eng, 6, 6053, 10.1021/acsbiomaterials.0c01228 Carragee, 2011, A critical review of recombinant human bone morphogenetic protein-2 trials in spinal surgery: emerging safety concerns and lessons learned, Spine J, 11, 471, 10.1016/j.spinee.2011.04.023 Hamedi, 2018, Chitosan based hydrogels and their applications for drug delivery in wound dressings: a review, Carbohydr Polym, 199, 445, 10.1016/j.carbpol.2018.06.114 Senapati, 2018, Controlled drug delivery vehicles for cancer treatment and their performance, Signal Transduct Target Ther, 3, 1, 10.1038/s41392-017-0004-3 Lin, 2018, Nanoparticle-triggered in situ catalytic chemical reactions for tumour-specific therapy, Chem Soc Rev, 47, 1938, 10.1039/C7CS00471K Gerstenfeld, 2003, Fracture healing as a post-natal developmental process: molecular, spatial, and temporal aspects of its regulation, J Cell Biochem, 88, 873, 10.1002/jcb.10435 Wang, 2013, Combined delivery of BMP-2 and bFGF from nanostructured colloidal gelatin gels and its effect on bone regeneration in vivo, J Control Release, 166, 172, 10.1016/j.jconrel.2012.12.015 2009 Sastry, 2014, Overview of the US FDA medical device approval process, Curr Cardiol Rep, 16, 1, 10.1007/s11886-014-0494-3 Van Norman, 2016, Drugs, devices, and the FDA: part 1: an overview of approval processes for drugs, JACC: Basic Transl Sci, 1, 170 Van Norman, 2016, Drugs, devices, and the FDA: part 2: an overview of approval processes: FDA approval of medical devices, JACC: Basic Transl Sci, 1, 277 Lee, 2003, Drug-induced hepatotoxicity, N Engl J Med, 349, 474, 10.1056/NEJMra021844 Robinson, 2005, Major mesh-related complications following hernia repair, Surg Endosc Other Interv Tech, 19, 1556, 10.1007/s00464-005-0120-y Wong, 2009, Selective covalent protein immobilization: strategies and applications, Chem Rev, 109, 4025, 10.1021/cr8004668 Mao, 2015, Regenerative medicine: current therapies and future directions, Proc Natl Acad Sci, 112, 14452, 10.1073/pnas.1508520112 Hasegawa, 2001, Photophysics, photochemistry, and optical properties of polyimides, Prog Polym Sci, 26, 259, 10.1016/S0079-6700(00)00042-3 Tashrifi, 2020, Dimethyl Sulfoxide: yesterday's solvent, today's reagent, Adv Synth Catal, 362, 65, 10.1002/adsc.201901021 Brayton, 1986, Dimethyl sulfoxide (DMSO): a review, Cornell Vet, 76, 61 Suchanek, 2005, Photo-leucine and photo-methionine allow identification of protein-protein interactions in living cells, Nat Methods, 2, 261, 10.1038/nmeth752 Ponsford MW, Diekwisch TG. Peri-implant disease. In: Emerging therapies in periodontics. Springer; 2020. p. 113–38. Domingos, 2013, Improved osteoblast cell affinity on plasma-modified 3-D extruded PCL scaffolds, Acta Biomater, 9, 5997, 10.1016/j.actbio.2012.12.031 Kurenkov, 2001, Alkaline hydrolysis of polyacrylamide, Russ J Appl Chem, 74, 543, 10.1023/A:1012786826774 Xue, 2014, Quantifying thiol–gold interactions towards the efficient strength control, Nat Commun, 5, 1, 10.1038/ncomms5348 Odeh, 2019, Aptamers chemistry: chemical modifications and conjugation strategies, Molecules, 25, 3, 10.3390/molecules25010003 Baino, 2015, Bioceramics and scaffolds: a winning combination for tissue engineering, Front Bioeng Biotechnol, 3, 202, 10.3389/fbioe.2015.00202 Prasadh, 2018, Osteogenic potential of graphene in bone tissue engineering scaffolds, Materials, 11, 1430, 10.3390/ma11081430 Alizadeh, 2021, Use of electroconductive biomaterials for engineering tissues by 3D printing and 3D bioprinting, Essays Biochem, 65, 441, 10.1042/EBC20210003 Zhang, 2018, Magnesium lithospermate B promotes proliferation and differentiation of neural stem cells in vitro and enhances neurogenesis in vivo, Tissue Cell, 53, 8, 10.1016/j.tice.2018.05.012 Yin, 2009, Covalent immobilisation of tropoelastin on a plasma deposited interface for enhancement of endothelialisation on metal surfaces, Biomaterials, 30, 1675, 10.1016/j.biomaterials.2008.11.009 Mithieux, 2013, Tropoelastin—A multifaceted naturally smart material, Adv Drug Deliv Rev, 65, 421, 10.1016/j.addr.2012.06.009 Wang, 2016, Modulation of human multipotent and pluripotent stem cells using surface nanotopographies and surface-immobilised bioactive signals: a review, Acta Biomater, 45, 31, 10.1016/j.actbio.2016.08.054 Del Río, 2020, CCL21-loaded 3D hydrogels for T cell expansion and differentiation, Biomaterials, 259 Ganán-Calvo, 2018, Review on the physics of electrospray: from electrokinetics to the operating conditions of single and coaxial Taylor cone-jets, and AC electrospray, J Aerosol Sci, 125, 32, 10.1016/j.jaerosci.2018.05.002 Zong, 2018, Designing function-oriented artificial nanomaterials and membranes via electrospinning and electrospraying techniques, Mater Sci Eng C, 92, 1075, 10.1016/j.msec.2017.11.007 Lei, 2019, The innovative fabrication and applications of carvacrol nanoemulsions, carboxymethyl chitosan microgels and their composite films, Colloids Surf B: Biointerfaces, 175, 688, 10.1016/j.colsurfb.2018.12.054 Madl, 2014, Presentation of BMP-2 mimicking peptides in 3D hydrogels directs cell fate commitment in osteoblasts and mesenchymal stem cells, Biomacromolecules, 15, 445, 10.1021/bm401726u Chen, 2012, Characterization of chemoselective surface attachment of the cationic peptide melimine and its effects on antimicrobial activity, Acta Biomater, 8, 4371, 10.1016/j.actbio.2012.07.029 Price, 2012, On silico peptide microarrays for high-resolution mapping of antibody epitopes and diverse protein-protein interactions, Nat Med, 18, 1434, 10.1038/nm.2913 Liu, 2016, Oriented immobilization of proteins on solid supports for use in biosensors and biochips: a review, Microchim Acta, 183, 1, 10.1007/s00604-015-1623-4 Shivashankar, 1997, Single DNA molecule grafting and manipulation using a combined atomic force microscope and an optical tweezer, Appl Phys Lett, 71, 3727, 10.1063/1.120495 Blázquez-Castro, 2019, Optical tweezers: phototoxicity and thermal stress in cells and biomolecules, Micromachines, 10, 507, 10.3390/mi10080507 Banerjee, 2011, Survey on indirect optical manipulation of cells, nucleic acids, and motor proteins, J Biomed Opt, 16, 10.1117/1.3579200 Martins TT, Muniz SR. Dynamically controlled double-well optical potential for colloidal particles. In: 2021 SBFoton international optics and photonics conference (SBFoton IOPC). IEEE; 2021. p. 1–4. Haidari, 2021, Polycationic silver nanoclusters comprising nanoreservoirs of Ag+ ions with high antimicrobial and antibiofilm activity, ACS Appl Mater Interfaces, 14, 390, 10.1021/acsami.1c21657 Pawlowski, 2008 Heimann, 2006, Thermal spraying of biomaterials, Surf Coat Technol, 201, 2012, 10.1016/j.surfcoat.2006.04.052 Liao, 2022, Multifunctional cold spray coatings for biological and biomedical applications: a review, Prog Surf Sci Karthikeyan, 1997, Plasma spray synthesis of nanomaterial powders and deposits, Mater Sci Eng A, 238, 275, 10.1016/S0921-5093(96)10568-2 Zhang, 2021, Antibacterial metals and alloys for potential biomedical implants, Bioact Mater, 6, 2569, 10.1016/j.bioactmat.2021.01.030