Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications
Tóm tắt
Từ khóa
Tài liệu tham khảo
Poinern, 2012, Biomedical magnesium alloys: a review of material properties, surface modifications and potential as a biodegradable orthopaedic implant, Am. J. Biomed. Eng., 2, 218, 10.5923/j.ajbe.20120206.02
Staiger, 2006, Magnesium and its alloys as orthopedic biomaterials: a review, Biomaterials, 27, 1728, 10.1016/j.biomaterials.2005.10.003
Murugan, 2005, Development of nanocomposites for bone grafting, Compos. Sci. Technol., 65, 2385, 10.1016/j.compscitech.2005.07.022
Ye, 2015, Mechanical properties and phase transition of biomedical titanium alloy strips with initial quasi-single phase state under high-energy electropulses, J. Mech. Behav. Biomed. Mater., 42, 100, 10.1016/j.jmbbm.2014.11.009
Witte, 2010, The history of biodegradable magnesium implants: a review, Acta Biomater., 6, 1680, 10.1016/j.actbio.2010.02.028
Ratner, 2004
Ye, 2015, Effects of high-energy electro-pulsing treatment on microstructure, mechanical properties and corrosion behavior of Ti–6Al–4V alloy, Mater. Sci. Eng. C, 49, 851, 10.1016/j.msec.2015.01.081
Rashmir-Raven, 1995, The response of cancellous and cortical canine bone to hydroxylapatite-coated and uncoated titanium rods, J. Appl. Biomater., 6, 237, 10.1002/jab.770060404
Nagels, 2003, Stress shielding and bone resorption in shoulder arthroplasty, J. Shoulder Elb. Surg., 12, 35, 10.1067/mse.2003.22
Ryan, 2006, Fabrication methods of porous metals for use in orthopaedic applications, Biomaterials, 27, 2651, 10.1016/j.biomaterials.2005.12.002
Lhotka, 2003, Four-year study of cobalt and chromium blood levels in patients managed with two different metal-on-metal total hip replacements, J. Orthop. Res., 21, 189, 10.1016/S0736-0266(02)00152-3
Walker, 2014, Magnesium biomaterials for orthopedic application: a review from a biological perspective, J. Biomed. Mater. Res. B Appl. Biomater., 102, 1316, 10.1002/jbm.b.33113
Ducheyne, 1980, Effect of hydroxyapatite impregnation on skeletal bonding of porous coated implants, J. Biomed. Mater. Res., 14, 225, 10.1002/jbm.820140305
Yoshikawa, 2008, Interconnected porous hydroxyapatite ceramics for bone tissue engineering, J. R. Soc. Interface, 13, 1
Itoh, 2004, Development of a novel biomaterial, hydroxyapatite/collagen (HAp/col) composite for medical use, Bio-Med. Mater. Eng., 15, 29
Rojaee, 2013, Controlling the degradation rate of AZ91 magnesium alloy via sol–gel derived nanostructured hydroxyapatite coating, Mater. Sci. Eng. C, 33, 3817, 10.1016/j.msec.2013.05.014
Zahrani, 2011, Sol-gel derived nanocrystalline fluoridated hydroxyapatite powders and nanostructured coatings for tissue engineering applications, Metall. Mater. Trans. A, 42, 3291, 10.1007/s11661-010-0465-2
Gadow, 2010, Hydroxyapatite coatings for biomedical applications deposited by different thermal spray techniques, Surf. Coat. Technol., 205, 1157, 10.1016/j.surfcoat.2010.03.059
Swetha, 2010, Biocomposites containing natural polymers and hydroxyapatite for bone tissue engineering, Int. J. Biol. Macromol., 47, 1, 10.1016/j.ijbiomac.2010.03.015
Guo, 2014, Synthetic biodegradable functional polymers for tissue engineering: a brief review, SCIENCE CHINA Chem., 57, 490, 10.1007/s11426-014-5086-y
Gunatillake, 2003, Biodegradable synthetic polymers for tissue engineering, Eur. Cells Mater., 5, 1, 10.22203/eCM.v005a01
Kohane, 2008, Polymeric biomaterials in tissue engineering, Pediatr. Res., 63, 487, 10.1203/01.pdr.0000305937.26105.e7
Zhao, 2012, Improved corrosion resistance and cytocompatibility of magnesium alloy by two-stage cooling in thermal treatment, Corros. Sci., 59, 360, 10.1016/j.corsci.2012.03.020
Witte, 2005, In vivo corrosion of four magnesium alloys and the associated bone response, Biomaterials, 26, 3557, 10.1016/j.biomaterials.2004.09.049
Ghali, 2010
Song, 2005, Recent progress in corrosion and protection of magnesium alloys, Adv. Eng. Mater., 7, 563, 10.1002/adem.200500013
Zhang, 2010, Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial, J. Mater. Sci. Mater. Med., 21, 2151, 10.1007/s10856-010-4070-0
Song, 2012, Corrosion and electrochemical evaluation of coated magnesium alloys, Corros. J. Sci. Eng., 68, 015005
Song, 2007, Control of biodegradation of biocompatable magnesium alloys, Corros. Sci., 49, 1696, 10.1016/j.corsci.2007.01.001
Xin, 2011, In vitro studies of biomedical magnesium alloys in a simulated physiological environment: a review, Acta Biomater., 7, 1452, 10.1016/j.actbio.2010.12.004
Rettig, 2008, Time-dependent electrochemical characterization of the corrosion of a magnesium rare-earth alloy in simulated body fluids, J. Biomed. Mater. Res. A, 85, 167, 10.1002/jbm.a.31550
Xin, 2008, Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment, Acta Biomater., 4, 2008, 10.1016/j.actbio.2008.05.014
Zeng, 2008, Progress and challenge for magnesium alloys as biomaterials, Adv. Eng. Mater., 10, B3, 10.1002/adem.200800035
Zeng, 2006, Review of studies on corrosion of magnesium alloys, Trans. Nonferrous Metals Soc. China, 16, s763, 10.1016/S1003-6326(06)60297-5
Song, 2003, Understanding magnesium corrosion—a framework for improved alloy performance, Adv. Eng. Mater., 5, 837, 10.1002/adem.200310405
Ghali, 2004, General and localized corrosion of magnesium alloys: a critical review, J. Mater. Eng. Perform., 13, 7, 10.1361/10599490417533
Liu, 2009, Corrosion of magnesium and its alloys, Corros. Sci., 51, 1733, 10.1016/j.corsci.2009.04.025
Gu, 2010, Corrosion fatigue behaviors of two biomedical Mg alloys–AZ91D and WE43–in simulated body fluid, Acta Biomater., 6, 4605, 10.1016/j.actbio.2010.07.026
Bundy, 1991, Stress-enhanced ion release—the effect of static loading, Biomaterials, 12, 627, 10.1016/0142-9612(91)90108-M
Bundy, 1986, The influence of static stress on the corrosion behavior of 316L stainless steel in Ringer's solution, J. Biomed. Mater. Res., 20, 493, 10.1002/jbm.820200406
Zhang, 2010, Research on an Mg–Zn alloy as a degradable biomaterial, Acta Biomater., 6, 626, 10.1016/j.actbio.2009.06.028
Wang, 2011, Dynamic behaviors of a Ca–P coated AZ31B magnesium alloy during in vitro and in vivo degradations, Mater. Sci. Eng. B, 176, 1718, 10.1016/j.mseb.2011.06.005
Kannan, 2011, Influence of circumferential notch and fatigue crack on the mechanical integrity of biodegradable magnesium-based alloy in simulated body fluid, J. Biomed. Mater. Res. B Appl. Biomater., 96, 303, 10.1002/jbm.b.31766
Song, 1998, Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride, Corros. Sci., 40, 1769, 10.1016/S0010-938X(98)00078-X
Lee, 2000, The role of solute in grain refinement of magnesium, Metall. Mater. Trans. A, 31, 2895, 10.1007/BF02830349
Ding, 2014, Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review, J. Mater. Chem. B, 2, 1912, 10.1039/C3TB21746A
Song, 2011, Corrosion behaviour of bulk ultra-fine grained AZ91D magnesium alloy fabricated by equal-channel angular pressing, Corros. Sci., 53, 362, 10.1016/j.corsci.2010.09.044
Song, 1999, Corrosion mechanisms of magnesium alloys, Adv. Eng. Mater., 1, 11, 10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N
Li, 2010, Biodegradable Mg-Ca and Mg-Ca-Y alloys for regenerative medicine, Materials Science Forum, Trans. Tech. Publ., 654, 2192
Kim, 2011, Effect of calcium addition on the corrosion behavior of Mg–5Al alloy, Intermetallics, 19, 1831, 10.1016/j.intermet.2011.07.024
Yin, 2008, Effect of Zn on mechanical property and corrosion property of extruded Mg-Zn-Mn alloy, Trans. Nonferrous Metals Soc. China, 18, 763, 10.1016/S1003-6326(08)60131-4
Song, 2012, The effect of Zn concentration on the corrosion behavior of Mg–xZn alloys, Corros. Sci., 65, 322, 10.1016/j.corsci.2012.08.037
Witte, 2008, Degradable biomaterials based on magnesium corrosion, Curr. Opinion Solid State Mater. Sci., 12, 63, 10.1016/j.cossms.2009.04.001
Song, 2009, Corrosion characterization of Mg–8Li alloy in NaCl solution, Corros. Sci., 51, 1087, 10.1016/j.corsci.2009.03.011
Zeng, 2014, Corrosion and characterisation of dual phase Mg–Li–Ca alloy in Hank's solution: the influence of microstructural features, Corros. Sci., 79, 69, 10.1016/j.corsci.2013.10.028
Hort, 2010, Magnesium alloys as implant materials–principles of property design for Mg–RE alloys, Acta Biomater., 6, 1714, 10.1016/j.actbio.2009.09.010
Rokhlin, 2003
Luo, 2010, Microstructure and mechanical properties of extruded magnesium-aluminum-cerium alloy tubes, Metall. Mater. Trans. A, 41, 2662, 10.1007/s11661-010-0278-3
Witte, 2007, Biodegradable magnesium scaffolds: part 1: appropriate inflammatory response, J. Biomed. Mater. Res. A, 81, 748, 10.1002/jbm.a.31170
Witte, 2007, Biodegradable magnesium scaffolds: part II: peri-implant bone remodeling, J. Biomed. Mater. Res. A, 81, 757, 10.1002/jbm.a.31293
Feyerabend, 2010, Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines, Acta Biomater., 6, 1834, 10.1016/j.actbio.2009.09.024
Sun, 1997, Effects of metal ions on osteoblast-like cell metabolism and differentiation, J. Biomed. Mater. Res., 34, 29, 10.1002/(SICI)1097-4636(199701)34:1<29::AID-JBM5>3.0.CO;2-P
Raggatt, 2010, Cellular and molecular mechanisms of bone remodeling, J. Biol. Chem., 285, 25103, 10.1074/jbc.R109.041087
Wang, 2009, Sol–gel coatings on metals for corrosion protection, Prog. Org. Coat., 64, 327, 10.1016/j.porgcoat.2008.08.010
Wright, 2000
Reetz, 1997, Entrapment of biocatalysts in hydrophobic sol-gel materials for use in organic chemistry, Adv. Mater., 9, 943, 10.1002/adma.19970091203
Brinker, 2013
Hench, 1998
Hu, 2012, Recent progress in corrosion protection of magnesium alloys by organic coatings, Prog. Org. Coat., 73, 129, 10.1016/j.porgcoat.2011.10.011
Gaur, 2014, In vitro investigation of biodegradable polymeric coating for corrosion resistance of Mg-6Zn-Ca alloy in simulated body fluid, Mater. Sci. Eng. C, 42, 91, 10.1016/j.msec.2014.05.035
Khramov, 2006, Sol–gel coatings with phosphonate functionalities for surface modification of magnesium alloys, Thin Solid Films, 514, 174, 10.1016/j.tsf.2006.02.023
Shi, 2009, Improvement of corrosion resistance of pure magnesium in Hanks' solution by microarc oxidation with sol–gel TiO2 sealing, J. Alloys Compd., 469, 286, 10.1016/j.jallcom.2008.01.102
Lalk, 2010, Biocompatibility and degradation behaviour of degradable magnesium sponges coated with bioglass–method establishment within the framework of a pilot study, Mater. Werkst., 41, 1025, 10.1002/mawe.201000704
Ishizaki, 2011, Corrosion resistance and durability of superhydrophobic surface formed on magnesium alloy coated with nanostructured cerium oxide film and fluoroalkylsilane molecules in corrosive NaCl aqueous solution, Langmuir, 27, 4780, 10.1021/la2002783
Agrawal, 1998, Reconstructing the human body using biomaterials, J. Miner. Met. Mater. Soc., 50, 31, 10.1007/s11837-998-0064-5
Middleton, 2000, Synthetic biodegradable polymers as orthopedic devices, Biomaterials, 21, 2335, 10.1016/S0142-9612(00)00101-0
Zhao, 2008, Study of PLGA coating on bio-absorbable Mg alloy [J], J. Funct. Mater., 6, 030
Miller, 1977, Degradation rates of oral resorbable implants (polylactates and polyglycolates): rate modification with changes in PLA/PGA copolymer ratios, J. Biomed. Mater. Res., 11, 711, 10.1002/jbm.820110507
Nair, 2007, Biodegradable polymers as biomaterials, Prog. Polym. Sci., 32, 762, 10.1016/j.progpolymsci.2007.05.017
Takahashi, 2005, Enhanced osteoinduction by controlled release of bone morphogenetic protein-2 from biodegradable sponge composed of gelatin and β-tricalcium phosphate, Biomaterials, 26, 4856, 10.1016/j.biomaterials.2005.01.012
Saito, 2005, Synthetic biodegradable polymers as drug delivery systems for bone morphogenetic proteins, Adv. Drug Deliv. Rev., 57, 1037, 10.1016/j.addr.2004.12.016
Shi, 2015, Preparation and characterization of PLA coating and PLA/MAO composite coatings on AZ31 magnesium alloy for improvement of corrosion resistance, Surf. Coat. Technol., 262, 26, 10.1016/j.surfcoat.2014.11.069
Zeng, 2014, In vitro degradation of MAO/PLA coating on Mg-1.21 Li-1.12 Ca-1.0 Y alloy, Front. Mater. Sci., 8, 343, 10.1007/s11706-014-0264-6
Chen, 2011, Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation, Biomed. Mater., 6, 025005, 10.1088/1748-6041/6/2/025005
Alabbasi, 2012, Polylactic acid coating on a biodegradable magnesium alloy: an in vitro degradation study by electrochemical impedance spectroscopy, Thin Solid Films, 520, 6841, 10.1016/j.tsf.2012.07.090
Wu, 2008, Improvement of mechanical and biological properties of porous CaSiO3 scaffolds by poly (d, l-lactic acid) modification, Acta Biomater., 4, 343, 10.1016/j.actbio.2007.08.010
Rezwan, 2006, Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering, Biomaterials, 27, 3413, 10.1016/j.biomaterials.2006.01.039
Leja, 2010, Polymer biodegradation and biodegradable polymers—a review, Pol. J. Environ. Stud., 19, 255
Reed, 1981, Biodegradable polymers for use in surgery-poly (glycolic)/poly (Iactic acid) homo and copolymers: 2. In vitro degradation, Polymer, 22, 494, 10.1016/0032-3861(81)90168-3
Ostrowski, 2013, Biodegradable poly (lactide-co-glycolide) coatings on magnesium alloys for orthopedic applications, J. Mater. Sci. Mater. Med., 24, 85, 10.1007/s10856-012-4773-5
Chen, 2014, Electrosprayed PLGA smart containers for active anti-corrosion coating on magnesium alloy AMlite, J. Mater. Chem. A, 2, 5738, 10.1039/c3ta14999d
Li, 2010, In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy, J. Mater. Sci., 45, 6038, 10.1007/s10853-010-4688-9
Park, 2013, Polycaprolactone coating with varying thicknesses for controlled corrosion of magnesium, J. Coat. Technol. Res., 10, 695, 10.1007/s11998-013-9474-6
Li, 2014, Deposition of microarc oxidation–polycaprolactone duplex coating to improve the corrosion resistance of magnesium for biodegradable implants, Thin Solid Films, 562, 561, 10.1016/j.tsf.2014.04.004
Degner, 2013, Electrochemical investigations of magnesium in DMEM with biodegradable polycaprolactone coating as corrosion barrier, Appl. Surf. Sci., 282, 264, 10.1016/j.apsusc.2013.05.115
Cai, 2011, Fabrication of anticorrosive multilayer onto magnesium alloy substrates via spin-assisted layer-by-layer technique, Mater. Sci. Eng. C, 31, 1800, 10.1016/j.msec.2011.08.012
Sell, 2010, The use of natural polymers in tissue engineering: a focus on electrospun extracellular matrix analogues, Polymers, 2, 522, 10.3390/polym2040522
Tan, 2010, Injectable, biodegradable hydrogels for tissue engineering applications, Materials, 3, 1746, 10.3390/ma3031746
Bose, 2012, Recent advances in bone tissue engineering scaffolds, Trends Biotechnol., 30, 546, 10.1016/j.tibtech.2012.07.005
Mushahary, 2014, Collagen type-I leads to in vivo matrix mineralization and secondary stabilization of Mg–Zr–Ca alloy implants, Colloids Surf. B Biointerfaces, 122, 719, 10.1016/j.colsurfb.2014.08.005
Wang, 2013, Poly (L-lactic acid)/hydroxyapatite/collagen composite coatings on AZ31 magnesium alloy for biomedical application, Proc. Inst. Mech. Eng. H J. Eng. Med., 227, 1094, 10.1177/0954411913493845
Fekry, 2014, Electrochemical impedance spectroscopy of chitosan coated magnesium alloys in a synthetic sweat medium, Surf. Coat. Technol., 238, 126, 10.1016/j.surfcoat.2013.10.058
Gu, 2009, Surface modification of an Mg-1Ca alloy to slow down its biocorrosion by chitosan, Biomed. Mater., 4, 1, 10.1088/1748-6041/4/4/044109
Bai, 2012, Fabrication of chitosan/magnesium phosphate composite coating and the in vitro degradation properties of coated magnesium alloy, Mater. Lett., 73, 59, 10.1016/j.matlet.2011.12.102
Liu, 2012, Improved anticorrosion of magnesium alloy via layer-by-layer self-assembly technique combined with micro-arc oxidation, Mater. Lett., 75, 118, 10.1016/j.matlet.2012.02.016
Vilker, 1981, The osmotic pressure of concentrated protein solutions: effect of concentration and pH in saline solutions of bovine serum albumin, J. Colloid Interface Sci., 79, 548, 10.1016/0021-9797(81)90106-5
Rahimnejad, 2006, Production of biological nanoparticles from bovine serum albumin for drug delivery, Afr. J. Biotechnol., 5, 1918
Liu, 2007, Degradation susceptibility of surgical magnesium alloy in artificial biological fluid containing albumin, J. Mater. Res., 22, 1806, 10.1557/jmr.2007.0241
Killian, 2010, Functionalization of metallic magnesium with protein layers via linker molecules, Langmuir, 26, 12044, 10.1021/la101880r
Luo, 2011, Electrochemical deposition of conducting polymer coatings on magnesium surfaces in ionic liquid, Acta Biomater., 7, 441, 10.1016/j.actbio.2010.09.006
B. Klocke, U. Bayer, Implant and method for production of the same, U.S. Patent 8,709,073 2014.
Wei, 2014, A universal approach to crosslinked hierarchical polymer multilayers as stable and highly effective antifouling coatings, Adv. Mater., 26, 2688, 10.1002/adma.201304737
Garinot, 2007, PEGylated PLGA-based nanoparticles targeting M cells for oral vaccination, J. Control. Release, 120, 195, 10.1016/j.jconrel.2007.04.021
Rho, 1998, Mechanical properties and the hierarchical structure of bone, Med. Eng. Phys., 20, 92, 10.1016/S1350-4533(98)00007-1
Kubota, 1999, Review processing and mechanical properties of fine-grained magnesium alloys, J. Mater. Sci., 34, 2255, 10.1023/A:1004561205627
Deschamps, 1998, Influence of predeformation on ageing in an Al-Zn-Mg alloy-I. Microstructure evolution and mechanical properties, Acta Biomater., 47, 281, 10.1016/S1359-6454(98)00293-6
Rzychoń, 2007, Microstructure of WE43 casting magnesium alloys, J. Achiev. Mater. Manuf. Eng., 21, 31
Hermawan, 2010, Degradable metallic biomaterials: design and development of Fe-Mn alloys for stents, J. Biomed. Mater. Res. A, 93, 1, 10.1002/jbm.a.32224
Michalik, 2013, The effect of modification with rare earth elements on ZnAl22Cu3 alloy structure and mechanical properties/Wpływ Modyfikacji Pierwiastkami Ziem Rzadkich Na Strukture I Własciwosci Mechaniczne Stopu ZnAl22Cu3, Arch. Metall. Mater., 58, 49, 10.2478/v10172-012-0149-6
Menthe, 2000, Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding, Surf. Coat. Technol., 133, 259, 10.1016/S0257-8972(00)00930-0
Niinomi, 1998, Mechanical properties of biomedical titanium alloys, Mater. Sci. Eng. A, 243, 231, 10.1016/S0921-5093(97)00806-X
Brantley, 1993, Cobalt-chromium and nickel-chromium alloys for removable prosthodontics, part 1: mechanical properties, J. Prosthodont., 2, 144, 10.1111/j.1532-849X.1993.tb00398.x
Munz, 2013
Fratzl, 1998, Fibrillar structure and mechanical properties of collagen, J. Struct. Biol., 122, 119, 10.1006/jsbi.1998.3966
Leung, 2008, Comparison of morphology and mechanical properties of PLGA bioscaffolds, Biomed. Mater., 3, 025006, 10.1088/1748-6041/3/2/025006
Kurniawan, 2011, Elastic properties of polycaprolactone at small strains are significantly affected by strain rate and temperature, Proc. Inst. Mech. Eng. H J. Eng. Med., 225, 1015, 10.1177/0954411911413059
Perego, 1996, Effect of molecular weight and crystallinity on poly (lactic acid) mechanical properties, J. Appl. Polym. Sci., 59, 37, 10.1002/(SICI)1097-4628(19960103)59:1<37::AID-APP6>3.0.CO;2-N
Walker, 2012, Magnesium alloys: predicting in vivo corrosion with in vitro immersion testing, J. Biomed. Mater. Res. B Appl. Biomater., 100, 1134, 10.1002/jbm.b.32680
Chaya, 2015, In vivo study of magnesium plate and screw degradation and bone fracture healing, Acta Biomater., 18, 262, 10.1016/j.actbio.2015.02.010
Abidin, 2013, The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ91, Corros. Sci., 75, 354, 10.1016/j.corsci.2013.06.019
Wang, 2008, Corrosion process of pure magnesium in simulated body fluid, Mater. Lett., 62, 2181, 10.1016/j.matlet.2007.11.045
Kirkland, 2012, Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations, Acta Biomater., 8, 925, 10.1016/j.actbio.2011.11.014
Abidin, 2011, Corrosion of high purity Mg, AZ91, ZE41 and Mg2Zn0·2Mn in Hank's solution at room temperature, Corros. Sci., 53, 862, 10.1016/j.corsci.2010.10.008
Wen, 2009, Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid, J. Alloys Compd., 488, 392, 10.1016/j.jallcom.2009.08.147
Witte, 2006, In vitro and in vivo corrosion measurements of magnesium alloys, Biomaterials, 27, 1013, 10.1016/j.biomaterials.2005.07.037
Xue, 2012, In vivo and in vitro degradation behavior of magnesium alloys as biomaterials, J. Mater. Sci. Technol., 28, 261, 10.1016/S1005-0302(12)60051-6
Sanchez, 2015, Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates? A review, Acta Biomater., 13, 16, 10.1016/j.actbio.2014.11.048
Ullmann, 2013, Influence of the grain size on the in vivo degradation behaviour of the magnesium alloy LAE442, Proc. Inst. Mech. Eng. H J. Eng. Med., 227, 317, 10.1177/0954411912471495
Mueller, 2010, Critical discussion of the results from different corrosion studies of Mg and Mg alloys for biomaterial applications, Acta Biomater., 6, 1749, 10.1016/j.actbio.2009.12.048
Thomann, 2009, Comparison of the resorbable magnesium. Alloys LAE442 und MgCa0.8 concerning their mechanical properties, their progress of degradation and the bone-implant-contact after 12months implantation duration in a rabbit model, Mater. Werkst., 40, 82, 10.1002/mawe.200800412
Krause, 2010, Degradation behaviour and mechanical properties of magnesium implants in rabbit tibiae, J. Mater. Sci., 45, 624, 10.1007/s10853-009-3936-3
Wlake, 2011, Plasticity and corrosion resistance of magnesium alloy WE43, Arch. Mater. Sci. Eng., 51, 16
Liu, 2014, Influence of fine-grain and solid-solution strengthening on mechanical properties and in vitro degradation of WE43 alloy, Biomed. Mater., 9, 015014, 10.1088/1748-6041/9/1/015014
Zeng, 2016, In vitro corrosion and cytocompatibility of a microarc oxidation coating and poly (l-lactic acid) composite coating on Mg-1Li-1Ca alloy for orthopedic implants, ACS Appl. Mater. Inter., 8, 10014, 10.1021/acsami.6b00527
Ostrowski, 2013, Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-by-layer coatings on AZ31 magnesium alloys, Acta Biomater., 9, 8704, 10.1016/j.actbio.2013.05.010
Zhang, 2012, Fabrication of hydroxyapatite/stearic acid composite coating and corrosion behavior of coated magnesium alloy, Mater. Lett., 88, 76, 10.1016/j.matlet.2012.08.011
Park, 2013, Effect on corrosion behavior of collagen film/fiber coated AZ31 magnesium alloy, Dig. J. Nanomater. Biostruct., 8, 1227