Biodegradable composite polymer as advanced gel electrolyte for quasi-solid-state lithium-metal battery

Zhang, 2019, Long cycling, thermal stable, dendrites free gel polymer electrolyte for flexible lithium metal batteries, Electrochim. Acta, 301, 304, 10.1016/j.electacta.2019.01.156 Wan, 2020, Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode, Nat. Commun., 11, 829, 10.1038/s41467-020-14550-3 Tang, 2020, Ion-confinement effect enabled by gel electrolyte for highly reversible dendrite-free zinc metal anode, Energy Stor. Mater., 27, 109, 10.1016/j.ensm.2020.01.023 Liu, 2020, Long-cycling and safe lithium metal batteries enabled by the synergetic strategy of ex situ anodic pretreatment and an in-built gel polymer electrolyte, J. Mater. Chem. A, 8, 7197, 10.1039/D0TA02148B Zhao, 2020, Highly multiscale structural Poly(vinylidene fluoridehexafluoropropylene)/poly-m-phenyleneisophthalamide separator with enhanced interface compatibility and uniform lithium-ion flux distribution for dendrite-proof lithium-metal batteries, Energy Stor. Mater., 26, 334, 10.1016/j.ensm.2019.11.005 Zhou, 2019, Intermolecular chemistry in solid polymer electrolytes for high-energy-density lithium batteries, Adv. Mater., 31, 1902029, 10.1002/adma.201902029 Zhao, 2021, A core@sheath nanofiber separator with combined hardness and softness for lithium-metal batteries, Chem. Eng. J., 404, 126542, 10.1016/j.cej.2020.126542 Zhou, 2021, In situ formation of poly(butyl acrylate)-based non-flammable elastic quasi-solid electrolyte for dendrite-free flexible lithium metal batteries with long cycle life for wearable devices, Energy Stor. Mater., 34, 629, 10.1016/j.ensm.2020.10.012 Zhao, 2020, A fresh hierarchical-structure gel poly-m-phenyleneisophthalamide nanofiber separator assisted by electronegative nanoclay-filler towards high-performance and advanced-safety lithium-ion battery, Chem. Eng. J., 384, 123312, 10.1016/j.cej.2019.123312 Cai, 2020, A highly ion-conductive three-dimensional LLZAO-PEO/LiTFSI solid electrolyte for high-performance solid-state batteries, Chem. Eng. J., 394, 124993, 10.1016/j.cej.2020.124993 Jamalpour, 2020, The effect of poly(hydroxyl ethyl methacrylate) on the performance of PVDF/P(MMA-co-HEMA) hybrid gel polymer electrolytes for lithium ion battery application, Polymer, 195, 122427, 10.1016/j.polymer.2020.122427 Hosseinioun, 2020, In situ crosslinked PMMA gel electrolyte from a low viscosity precursor solution for cost-effective, long lasting and sustainable lithium-ion batteries, J. Membr. Sci., 594, 117456, 10.1016/j.memsci.2019.117456 Li, 2020, High performance of boehmite/polyacrylonitrile composite nanofiber membrane for polymer lithium-ion battery, RSC Adv., 10, 27492, 10.1039/D0RA02401E Mohanta, 2019, Preparation of highly porous PAN-LATP membranes as separators for lithium ion batteries, Nanomaterials, 9, 1581, 10.3390/nano9111581 Li, 2019, Upgrading comprehensive performances of gel polymer electrolyte based on polyacrylonitrile via copolymerizing acrylonitrile with N-vinylpryrrolidone, Electrochim. Acta, 320, 134572, 10.1016/j.electacta.2019.134572 Abdul Razzaq, 2019, High-performance lithium sulfur batteries enabled by a synergy between sulfur and carbon nanotubes, Energy Stor. Mater., 16, 194, 10.1016/j.ensm.2018.05.006 Wang, 2019, A polyacrylonitrile (PAN)-based double-layer multifunctional gel polymer electrolyte for lithium-sulfur batteries, J. Membr. Sci., 582, 37, 10.1016/j.memsci.2019.03.048 Barbosa, 2020, Lithium-ion battery separator membranes based on poly(L-lactic acid) biopolymer, Mater. Today Energy, 18, 100494, 10.1016/j.mtener.2020.100494 Zhu, 2016, Degradable cellulose acetate/poly-L-lactic acid/halloysite nanotube composite nanofiber membranes with outstanding performance for gel polymer electrolytes, J. Mater. Chem. A, 4, 12136, 10.1039/C6TA05207J Li, 2019, Synergistically suppressing lithium dendrite growth by coating poly-L-lactic acid on sustainable gel polymer electrolyte, Energy Technol., 7, 1800768, 10.1002/ente.201800768 Zheng, 2020, Lithium difluorophosphate-based dual-salt low concentration electrolytes for lithium metal batteries, Adv. Energy Mater., 10, 2001440, 10.1002/aenm.202001440 Li, 2019, Single-ion conducting electrolyte based on electrospun nanofibers for high-performance lithium batteries, Adv. Energy Mater., 9, 1803422, 10.1002/aenm.201803422 Yang, 2021, The recent research progress and prospect of gel polymer electrolytes in lithium-sulfur batteries, Chem. Eng. J., 413, 127427, 10.1016/j.cej.2020.127427 Li, 2021, Developing “polymer-in-salt” high voltage electrolyte based on composite lithium salts for solid-state Li metal batteries, Adv. Funct. Mater., 31, 2103049, 10.1002/adfm.202103049 Xie, 2019, Increased gt conformer contents of PLLA molecular chains Induced by Li-TFSI in melt: another route to promote PLLA crystallization, Macromolecules, 52, 7065, 10.1021/acs.macromol.9b01188 Croce, 2011, A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning, Energy Environ. Sci., 4, 921, 10.1039/c0ee00348d Zou, 2018, Flexible, flame-resistant, and dendrite-impermeable gel-polymer electrolyte for Li-O2/air batteries workable under hurdle conditions, Small, 14, 1801798, 10.1002/smll.201801798 Chen, 2020, Reinforcing concentrated phosphate electrolytes with in-situ polymerized skeletons for robust quasi-solid lithium metal batteries, Energy Stor. Mater., 25, 305, 10.1016/j.ensm.2019.10.008 Simon, 2020, Interphase formation of PEO20: LiTFSI-Li6PS5Cl composite electrolytes with lithium metal, ACS Appl. Mater. Interfaces, 12, 11713, 10.1021/acsami.9b22968 Zhou, 2019, Lithium-salt mediated synthesis of a covalent triazine framework for highly stable lithium metal batteries, Angew. Chem. Int. Ed., 58, 16795, 10.1002/anie.201908513 Guan, 2020, In-situ crosslinked single ion gel polymer electrolyte with superior performances for lithium metal batteries, Chem. Eng. J., 382, 117456, 10.1016/j.cej.2019.122935 Cho, 2019, Gel/solid polymer electrolytes characterized by in situ gelation or polymerization for electrochemical energy systems, Adv. Mater., 31, 1804909, 10.1002/adma.201804909 Yin, 2018, Encapsulation of CoSx nanocrystals into N/S co-doped honeycomb-like 3D porous carbon for high-performance lithium storage, Adv. Sci., 5, 1800829, 10.1002/advs.201800829 Su, 2021, Postinjection gelation of an electrolyte with high storage permittivity and low loss permittivity for electrochemical capacitors, J. Power Sources, 481, 228869, 10.1016/j.jpowsour.2020.228869 Saroj, 2014, Thermal, vibrational, and dielectric studies on [PVP/LiBF4]+ ionic liquid [EMIM][BF4]-based polymer electrolyte films, J. Phys. Chem. Solid., 75, 849, 10.1016/j.jpcs.2014.02.005 Sun, 2016, High energy density of quasi-solid-state supercapacitor based on redox-mediated gel polymer electrolyte, RSC Adv., 6, 55225, 10.1039/C6RA06797B Murugadoss, 2019, Optimizing graphene content in a NiSe/graphene nanohybrid counter electrode to enhance the photovoltaic performance of dye-sensitized solar cells, Nanoscale, 11, 17579, 10.1039/C9NR07060E Bora, 2018, A low cost carbon black/polyaniline nanotube composite as efficient electro-catalyst for triiodide reduction in dye sensitized solar cells, Electrochim. Acta, 259, 233, 10.1016/j.electacta.2017.10.156 Li, 2020, Frontier orbital energy-customized ionomer-based polymer electrolyte for high-voltage lithium metal batteries, ACS Appl. Mater. Interfaces, 12, 51374, 10.1021/acsami.0c13520 Yan, 2019, 4.5 V High-voltage rechargeable batteries enabled by the reduction of polarization on the lithium metal anode, Angew. Chem. Int. Ed., 58, 15235, 10.1002/anie.201908874 Wen, 2020, Ultrafast ion transport at a cathode-electrolyte interface and its strong dependence on salt solvation, Nat. Energy, 5, 578, 10.1038/s41560-020-0647-0 Kotronia, 2021, Nature of the cathode-electrolyte interface in highly concentrated electrolytes used in graphite dual-ion batteries, ACS Appl. Mater. Interfaces, 13, 3867, 10.1021/acsami.0c18586 Tang, 2020, Highly safe electrolyte enabled via controllable polysulfide release and efficient conversion for advanced lithium-sulfur batteries, Small, 16, 1905737, 10.1002/smll.201905737 Tang, 2019, A comparative electrochemical investigation and an effective promotion towards electrochemical performance of MnCO3 aggregates, Chem. Eng. J., 360, 553, 10.1016/j.cej.2018.12.043 Liu, 2016, Novel gel polymer electrolyte for high-performance lithium-sulfur batteries, Nano Energy, 22, 278, 10.1016/j.nanoen.2016.02.008 Wang, 2018, A facile surfactant-assisted self-assembly of LiFePO4/graphene composites with improved rate performance for lithium ion batteries, J. Electroanal. Chem., 818, 68, 10.1016/j.jelechem.2018.04.030