Bioactive graphene oxide-functionalized self-expandable hydrophilic and osteogenic nanocomposite for orthopaedic applications

Sebastian, 2020, Antibiotic containing bone cement in prevention of hip and knee prosthetic joint infections: a systematic review and meta-analysis, J Orthop Translat, 23, 53, 10.1016/j.jot.2020.04.005 van der Voort, 2016, Comparison of femoral component migration between Refobacin bone cement R and Palacos R + G in cemented total hip arthroplasty: a randomised controlled roentgen stereophotogrammetric analysis and clinical study, Bone Joint Lett. J, 98-b, 1333, 10.1302/0301-620X.98B10.37116 Robertsson, 2014, The Swedish knee arthroplasty register: a review, Bone Joint Res, 3, 217, 10.1302/2046-3758.37.2000289 Nieuwenhuijse, 2011, Cement leakage in percutaneous vertebroplasty for osteoporotic vertebral compression fractures: identification of risk factors, Spine J. : official journal of the North American Spine Society, 11, 839, 10.1016/j.spinee.2011.07.027 Hu, 2011, Polymethylmethacrylate augmentation of the pedicle screw: the cement distribution in the vertebral body, Eur. Spine J. : official publication of the European Spine Society, the European Spinal Deformity Society, and the European Section of the Cervical Spine Research Society, 20, 1281, 10.1007/s00586-011-1824-4 Patel, 1987, Polymerization shrinkage of methacrylate esters, Biomaterials, 8, 53, 10.1016/0142-9612(87)90030-5 Gilbert, 2000, A theoretical and experimental analysis of polymerization shrinkage of bone cement: a potential major source of porosity, J. Biomed. Mater. Res., 52, 210, 10.1002/1097-4636(200010)52:1<210::AID-JBM27>3.0.CO;2-R Kwong, 2006, A comparison of the shrinkage of commercial bone cements when mixed under vacuum, J Bone Joint Surg Br, 88, 120, 10.1302/0301-620X.88B1.16600 Haas, 1975, A characterization of polymethylmethacrylate bone cement, the Journal of bone and joint surgery, American volume, 57, 380 Roques, 2004, Quantitative measurement of the stresses induced during polymerisation of bone cement, Biomaterials, 25, 4415, 10.1016/j.biomaterials.2003.11.009 Griza, 2013, Thermally induced strains and total shrinkage of the polymethyl-methacrylate cement in simplified models of total hip arthroplasty, J. Mech. Behav. Biomed. Mater., 18, 29, 10.1016/j.jmbbm.2012.09.018 Atai, 2005, Shrinkage strain-rates of dental resin-monomer and composite systems, Biomaterials, 26, 5015, 10.1016/j.biomaterials.2005.01.022 Miller, 2016, Changes in microgaps, micromotion, and trabecular strain from interlocked cement-trabecular bone interfaces in total knee replacements with in vivo service, J. Orthop. Res. : official publication of the Orthopaedic Research Society, 34, 1019, 10.1002/jor.23109 Kinzl, 2012, The mechanical behavior of PMMA/bone specimens extracted from augmented vertebrae: a numerical study of interface properties, PMMA shrinkage and trabecular bone damage, J. Biomech., 45, 1478, 10.1016/j.jbiomech.2012.02.012 Takahashi, 2019, Development of a scoring system for predicting adjacent vertebral fracture after balloon kyphoplasty, Spine J. : official journal of the North American Spine Society, 19, 1194, 10.1016/j.spinee.2019.02.013 Zhu, 2019, Mineralized collagen modified polymethyl methacrylate bone cement for osteoporotic compression vertebral fracture at 1-year follow-up, Spine, 44, 827, 10.1097/BRS.0000000000002971 Robo, 2021, Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures, J. Mech. Behav. Biomed. Mater., 118, 10.1016/j.jmbbm.2021.104437 Boger, 2008, Performance of vertebral cancellous bone augmented with compliant PMMA under dynamic loads, Acta Biomater., 4, 1688, 10.1016/j.actbio.2008.06.019 Hoess, 2016, Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements, Mater Sci Eng C Mater Biol Appl, 62, 274, 10.1016/j.msec.2016.01.048 Schwarzkopf, 2019, Occurrence, risk factors, and outcomes of bone cement implantation syndrome after hemi and total hip arthroplasty in cancer patients, J. Surg. Oncol., 120, 1008, 10.1002/jso.25675 Modig, 1975, Arterial hypotension and hypoxaemia during total hip replacement: the importance of thromboplastic products, fat embolism and acrylic monomers, Acta Anaesthesiol. Scand., 19, 28, 10.1111/j.1399-6576.1975.tb05219.x Choppadandi, 2019, Detoxification of poly(methyl methacrylate) bone cement by natural antioxidant intervention, J. Biomed. Mater. Res., 107, 2835, 10.1002/jbm.a.36785 Tsukimura, 2009, N-acetyl cysteine (NAC)-mediated detoxification and functionalization of poly(methyl methacrylate) bone cement, Biomaterials, 30, 3378, 10.1016/j.biomaterials.2009.02.043 Aita, 2010, N-acetyl cysteine prevents polymethyl methacrylate bone cement extract-induced cell death and functional suppression of rat primary osteoblasts, J. Biomed. Mater. Res., 92, 285, 10.1002/jbm.a.32336 Hamajima, 2020, The effect of TBB, as an initiator, on the biological compatibility of PMMA/MMA bone cement, Int. J. Mol. Sci., 21, 10.3390/ijms21114016 Sugita, 2020, Novel osteogenic behaviors around hydrophilic and radical-free 4-META/MMA-TBB: implications of an osseointegrating bone cement, Int. J. Mol. Sci., 21, 10.3390/ijms21072405 Wolf-Brandstetter, 2013, Physicochemical and cell biological characterization of PMMA bone cements modified with additives to increase bioactivity, J. Biomed. Mater. Res. B Appl. Biomater., 101, 599, 10.1002/jbm.b.32862 Phakatkar, 2020, Novel PMMA bone cement nanocomposites containing magnesium phosphate nanosheets and hydroxyapatite nanofibers, Mater Sci Eng C Mater Biol Appl, 109, 10.1016/j.msec.2019.110497 Miola, 2014, Antibiotic-free composite bone cements with antibacterial and bioactive properties. A preliminary study, Mater Sci Eng C Mater Biol Appl, 43, 65, 10.1016/j.msec.2014.06.026 Verné, 2015, Composite bone cements loaded with a bioactive and ferrimagnetic glass-ceramic: leaching, bioactivity and cytocompatibility, Mater Sci Eng C Mater Biol Appl, 53, 95, 10.1016/j.msec.2015.03.039 Wright, 2021, Bioactive, ion-releasing PMMA bone cement filled with functional graphenic materials, Adv Healthc Mater, 10, 10.1002/adhm.202001189 Kim, 2004, The characteristics of a hydroxyapatite-chitosan-PMMA bone cement, Biomaterials, 25, 5715, 10.1016/j.biomaterials.2004.01.022 Lin, 2005, Evaluation of chitosan/beta-tricalcium phosphate microspheres as a constituent to PMMA cement, J. Mater. Sci. Mater. Med., 16, 567, 10.1007/s10856-005-0533-0 Pahlevanzadeh, 2018, In-vitro biocompatibility, bioactivity, and mechanical strength of PMMA-PCL polymer containing fluorapatite and graphene oxide bone cements, J. Mech. Behav. Biomed. Mater., 82, 257, 10.1016/j.jmbbm.2018.03.016 Yang, 2017, Synthesis and characterization of an injectable and hydrophilous expandable bone cement based on poly(methyl methacrylate), ACS Appl. Mater. Interfaces, 9, 40846, 10.1021/acsami.7b12983 Luo, 2015, Enhanced proliferation and osteogenic differentiation of mesenchymal stem cells on graphene oxide-incorporated electrospun poly(lactic-co-glycolic acid) nanofibrous mats, ACS Appl. Mater. Interfaces, 7, 6331, 10.1021/acsami.5b00862 Lee, 2011, Origin of enhanced stem cell growth and differentiation on graphene and graphene oxide, ACS Nano, 5, 7334, 10.1021/nn202190c Kim, 2015, Controlling differentiation of adipose-derived stem cells using combinatorial graphene hybrid-pattern arrays, ACS Nano, 9, 3780, 10.1021/nn5066028 Zhang, 2021, An orthobiologics-free strategy for synergistic photocatalytic antibacterial and osseointegration, Biomaterials, 274, 10.1016/j.biomaterials.2021.120853 Zhang, 2021, 3D bioprinting of graphene oxide-incorporated cell-laden bone mimicking scaffolds for promoting scaffold fidelity, osteogenic differentiation and mineralization, Acta Biomater., 121, 637, 10.1016/j.actbio.2020.12.026 He, 2012, Alginate/graphene oxide fibers with enhanced mechanical strength prepared by wet spinning, Carbohydr. Polym., 88, 1100, 10.1016/j.carbpol.2012.01.071 Mehrali, 2014, Synthesis, mechanical properties, and in vitro biocompatibility with osteoblasts of calcium silicate–reduced graphene oxide composites, ACS Appl. Mater. Interfaces, 6, 3947, 10.1021/am500845x Paz, 2017, Graphene oxide versus graphene for optimisation of PMMA bone cement for orthopaedic applications, Mater Sci Eng C Mater Biol Appl, 77, 1003, 10.1016/j.msec.2017.03.269 Gonçalves, 2012, Graphene oxide versus functionalized carbon nanotubes as a reinforcing agent in a PMMA/HA bone cement, Nanoscale, 4, 2937, 10.1039/c2nr30303e Gonçalves, 2013, Evaluation of the in vitro biocompatibility of PMMA/high-load HA/carbon nanostructures bone cement formulations, J. Mater. Sci. Mater. Med., 24, 2787, 10.1007/s10856-013-5030-2 Paz, 2019, Graphene oxide and graphene reinforced PMMA bone cements: evaluation of thermal properties and biocompatibility, Materials, 12, 10.3390/ma12193146 Marcia, 2021, Efficacy of a novel vertebral body augmentation system in the treatment of patients with symptomatic vertebral body fractures, Cardiovasc. Intervent. Radiol., 44, 289, 10.1007/s00270-020-02658-4 Zhu, 2020, Bioactive poly (methyl methacrylate) bone cement for the treatment of osteoporotic vertebral compression fractures, Theranostics, 10, 6544, 10.7150/thno.44428 Orriss, 2012, Rat osteoblast cultures, Methods Mol. Biol., 816, 31, 10.1007/978-1-61779-415-5_3 Jacobs, 2016, Synthesis and characterization of a new vertebroplasty cement based on gold-containing PMMA microspheres, Biomaterials, 82, 60, 10.1016/j.biomaterials.2015.12.024 Purohit, 2019, Development of a nanocomposite scaffold of gelatin-alginate-graphene oxide for bone tissue engineering, Int. J. Biol. Macromol., 133, 592, 10.1016/j.ijbiomac.2019.04.113 Giavaresi, 2012, New PMMA-based composites for preparing spacer devices in prosthetic infections, J. Mater. Sci. Mater. Med., 23, 1247, 10.1007/s10856-012-4585-7 Wang, 2014, The effects of pulsed electromagnetic field on the functions of osteoblasts on implant surfaces with different topographies, Acta Biomater., 10, 975, 10.1016/j.actbio.2013.10.008 Cao, 2014, Bone regeneration using photocrosslinked hydrogel incorporating rhBMP-2 loaded 2-N, 6-O-sulfated chitosan nanoparticles, Biomaterials, 35, 2730, 10.1016/j.biomaterials.2013.12.028 Yueyi, 2013, Calvarial defect healing by recruitment of autogenous osteogenic stem cells using locally applied simvastatin, Biomaterials, 34, 9373, 10.1016/j.biomaterials.2013.08.060 Xie, 2015, Characterization of human ethmoid sinus mucosa derived mesenchymal stem cells (hESMSCs) and the application of hESMSCs cell sheets in bone regeneration, Biomaterials, 66, 67, 10.1016/j.biomaterials.2015.07.013 Pahlevanzadeh, 2021, CNT and rGO reinforced PMMA based bone cement for fixation of load bearing implants: mechanical property and biological response, J. Mech. Behav. Biomed. Mater., 116, 10.1016/j.jmbbm.2021.104320 Hazarika, 2013, Graphene nanosheets generated from sulfonated polystyrene/graphene nanocomposite, Compos. Sci. Technol., 87, 94, 10.1016/j.compscitech.2013.08.004 Li, 2012, A facile, controllable fabrication of polystyrene/graphene core-shell microspheres and its application in high-performance electrocatalysis, Chem Commun (Camb), 48, 7997, 10.1039/c2cc34411d Wazalwar, 2021, Mechanical and curing behavior of epoxy composites reinforced with polystyrene-graphene oxide (PS-GO) core-shell particles, Composites Part C: Open Access, 5 Tavakoli, 2020, Incorporation of chitosan/graphene oxide nanocomposite in to the PMMA bone cement: physical, mechanical and biological evaluation, Int. J. Biol. Macromol., 149, 783, 10.1016/j.ijbiomac.2020.01.300 Huang, 2012, Preparation and swelling properties of graphene oxide/poly(acrylic acid-co-acrylamide) super-absorbent hydrogel nanocomposites, Colloids Surf. A Physicochem. Eng. Asp., 401, 97, 10.1016/j.colsurfa.2012.03.031 Zhang, 2013, Facile assembly and properties of polystyrene microsphere/reduced graphene oxide/Ag composite, J. Colloid Interface Sci., 402, 279, 10.1016/j.jcis.2013.03.042 Hummel, 2020, Thermal transport in ampholytic polymers: the role of hydrogen bonding and water uptake, Macromolecules, 53, 5528, 10.1021/acs.macromol.0c00596 Mu, 2014, Thermal transport in graphene oxide--from ballistic extreme to amorphous limit, Sci. Rep., 4, 3909, 10.1038/srep03909 Pan, 2021, Enhanced thermal conductivity in oriented polyvinyl alcohol/graphene oxide composites, ACS Appl. Mater. Interfaces, 13, 28864, 10.1021/acsami.1c06415 Ormsby, 2014, Carboxyl functionalised MWCNT/polymethyl methacrylate bone cement for orthopaedic applications, J. Biomater. Appl., 29, 209, 10.1177/0885328214521252 Wang, 2019, Regulating the behavior of human gingival fibroblasts by sp2 domains in reduced graphene oxide, ACS Biomater. Sci. Eng., 5, 6414, 10.1021/acsbiomaterials.9b00497 Yang, 2018, Enhanced osteogenic differentiation of stem cells on phase-engineered graphene oxide, ACS Appl. Mater. Interfaces, 10, 12497, 10.1021/acsami.8b02225 Chiu, 2010, Polymethylmethacrylate particles impair osteoprogenitor viability and expression of osteogenic transcription factors Runx2, osterix, and Dlx5, J. Orthop. Res. : official publication of the Orthopaedic Research Society, 28, 571, 10.1002/jor.21035 Mirza, 2019, Characterization of osteogenic cells grown over modified graphene-oxide-biostable polymers, Biomed. Mater., 14, 10.1088/1748-605X/ab3ab2 Ma, 2010, Polymethylmethacrylate particle exposure causes changes in p38 MAPK and TGF-beta signaling in differentiating MC3T3-E1 cells, J. Biomed. Mater. Res., 94, 234, 10.1002/jbm.a.32686 Mitchell, 2010, Controlled spatial and conformational display of immobilised bone morphogenetic protein-2 and osteopontin signalling motifs regulates osteoblast adhesion and differentiation in vitro, BMC Biol., 8, 57, 10.1186/1741-7007-8-57 Kim, 2021, Mastocytosis-derived extracellular vesicles deliver miR-23a and miR-30a into pre-osteoblasts and prevent osteoblastogenesis and bone formation, Nat. Commun., 12, 2527, 10.1038/s41467-021-22754-4 Li, 2021, Graphene oxide-functionalized nanocomposites promote osteogenesis of human mesenchymal stem cells via enhancement of BMP-SMAD1/5 signaling pathway, Biomaterials, 277, 10.1016/j.biomaterials.2021.121082 Xiang, 2021, In situ regulation of macrophage polarization to enhance osseointegration under diabetic conditions using injectable silk/sitagliptin gel scaffolds, Adv. Sci., 8 Lv, 2015, A novel composite PMMA-based bone cement with reduced potential for thermal necrosis, ACS Appl. Mater. Interfaces, 7, 11280, 10.1021/acsami.5b01447 Zhou, 2018, Collagen functionalized with graphene oxide enhanced biomimetic mineralization and in situ bone defect repair, ACS Appl. Mater. Interfaces, 10, 44080, 10.1021/acsami.8b17636 Chang, 2020, In vitro and in vivo biological responses to graphene and graphene oxide: a murine calvarial animal study, Int. J. Nanomed., 15, 647, 10.2147/IJN.S231885 Makita, 2008, Effects of barium concentration on the radiopacity and biomechanics of bone cement: experimental study, Radiat. Med., 26, 533, 10.1007/s11604-008-0269-0 Kobayashi, 2005, Histological and radiographic evaluation of polymethylmethacrylate with two different concentrations of barium sulfate in a sheep vertebroplasty model, J. Biomed. Mater. Res., 75, 123, 10.1002/jbm.a.30388 Khandaker, 2014, Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement, Int. J. Nanomed., 9, 2699, 10.2147/IJN.S61964 Kurtz, 2005, Static and fatigue mechanical behavior of bone cement with elevated barium sulfate content for treatment of vertebral compression fractures, Biomaterials, 26, 3699, 10.1016/j.biomaterials.2004.09.055 Shearwood-Porter, 2012, Micromechanical characterisation of failure in acrylic bone cement: the effect of barium sulphate agglomerates, J. Mech. Behav. Biomed. Mater., 13, 85, 10.1016/j.jmbbm.2012.04.012 Lazarus, 1994, Comparison of the inflammatory response to particulate polymethylmethacrylate debris with and without barium sulfate, J. Orthop. Res. : official publication of the Orthopaedic Research Society, 12, 532, 10.1002/jor.1100120410 Ingham, 2000, Production of TNF-alpha and bone resorbing activity by macrophages in response to different types of bone cement particles, Biomaterials, 21, 1005, 10.1016/S0142-9612(99)00261-6 Togawa, 2003, Histologic evaluation of human vertebral bodies after vertebral augmentation with polymethyl methacrylate, Spine, 28, 1521, 10.1097/01.BRS.0000076825.12630.3C Vallo, 1999, Polymethylmethacrylate-based bone cement modified with hydroxyapatite, J. Biomed. Mater. Res., 48, 150, 10.1002/(SICI)1097-4636(1999)48:2<150::AID-JBM9>3.0.CO;2-D