Behavior and Modeling of Concrete Confined with FRP Composites of Large Deformability

Journal of Composites for Construction - Tập 15 Số 6 - Trang 963-973 - 2011
Jian‐Guo Dai1,2,3, Yu-Lei Bai1,2,3, J.G. Teng1,2,3
1Assistant Professor, Dept. of Civil and Structural Engineering, Hong Kong Polytechnic Univ., Hong Kong, China (corresponding author).
2Chair Professor of Structural Engineering, Dept. of Civil and Structural Engineering, Hong Kong Polytechnic Univ., Hong Kong, China.
3Ph.D. Candidate, Dept. of Civil and Structural Engineering, Hong Kong Polytechnic Univ., Hong Kong, China.

Tóm tắt

Từ khóa


Tài liệu tham khảo

10.1016/j.cemconcomp.2006.07.011

ASTM. (2008a). “Standard test method for tensile properties of plastics.” D638-08 West Conshohocken PA.

ASTM. (2008b). “Standard test method for tensile properties of polymer matrix composite materials.” D3039M-08 West Conshohoken PA.

10.1016/j.conbuildmat.2005.01.029

10.1016/j.engstruct.2005.03.002

Chun S. S. and Park H. C. (2002). “Load carrying capacity and ductility of RC columns confined by carbon fiber reinforced polymer.” Proc. 3rd Int. Conf. on Composites in Infrastructure Omnipress Madison WI.

10.1061/(ASCE)CC.1943-5614.0000115

Dai J. G. and Ueda T. (2012). “Strength and deformability of concrete members wrapped with fibre-reinforced polymer composites with a large rupture strain.” Chapter 14 Innovative materials and techniques in concrete construction: ACES workshop M. N. Fardis ed. Springer New York 225–241.

Fam A. Z., 2001, Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes, ACI Struct. J., 98, 451

10.1016/j.cemconcomp.2006.07.005

Harries K. A., 2002, Behavior and modeling of concrete subject to variable confining pressure, ACI Mater. J., 99, 180

10.1016/j.engstruct.2007.01.010

10.1016/S0950-0618(03)00045-X

10.1061/(ASCE)1090-0268(2004)8:6(539)

10.1007/s10853-010-4999-x

10.1061/(ASCE)CC.1943-5614.0000029

Lillistone D., 2000, An innovative form of reinforcement for concrete columns using advanced composites, Struct. Eng., 78, 20

10.1061/(ASCE)0733-9445(1988)114:8(1804)

10.1061/(ASCE)1090-0268(2004)8:4(332)

10.1002/(SICI)1099-1484(199707)2:3<237::AID-CFM32>3.0.CO;2-2

10.1016/0008-8846(73)90096-3

10.1061/(ASCE)0733-9445(2007)133:6(825)

10.1061/(ASCE)1090-0268(1999)3:3(143)

Teng J. G., 2002, FRP-strengthened RC structures

10.1061/(ASCE)1090-0268(2007)11:2(201)

10.1061/(ASCE)CC.1943-5614.0000012

10.1061/(ASCE)0733-9445(2004)130:11(1713)

Toutanji H., 1999, Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets, ACI Mater. J., 96, 397

Ueda T. (2009). “Structural performance of members strengthened by FRP jacketing with high fracturing strain.” Proc. 2nd Asia-Pacific Conf. on FRP in Structures (APFIS 2009) Seoul 19–28.

10.1061/(ASCE)0899-1561(2000)12:2(139)

10.1177/0731684403035430

10.1016/j.compositesb.2006.07.020