Bayesian networks in manufacturing
Tóm tắt
The purpose of this paper is to raise awareness among manufacturing researchers and practitioners of the potential of Bayesian networks (BNs) to enhance decision making in those parts of the manufacturing domain where uncertainty is a key characteristic. In doing so, the paper describes the development of an intelligent decision support system (DSS) to help operators in Motorola to diagnose and correct faults during the process of product system testing.
The intelligent (DSS) combines BNs and an intelligent user interface to produce multi‐media advice for operators.
Surveys show that the system is effective in considerably reducing fault correction times for most operators and most fault types and in helping inexperienced operators to approach the performance levels of experienced operators.
Such efficiency improvements are of obvious value in manufacturing. In this particular case, additional benefit was derived when the product testing facility was moved from the UK to China as the system was able to help the new operators to get close to the historical performance level of experienced operators.
Từ khóa
Tài liệu tham khảo
Anderson, R.D. and Vastag, G. (2004), “Causal modeling alternatives in operations research: overview and application”, European Journal of Operational Research, Vol. 156, pp. 92‐109.
Barco, R., Wille, V. and Diez, L. (2005), “System for automated diagnosis in cellular networks based on performance indicators”, European Transactions on Telecommunications, Vol. 16, pp. 399‐409.
Bouissou, M. and Pourret, O. (2003), “A Bayesian belief network based method for performance evaluation and troubleshooting of multistate systems”, International Journal of Reliability, Quality and Safety Engineering, Vol. 10 No. 4, pp. 407‐16.
Cannata, A., Gerosa, M. and Taisch, M. (2008), “SOCRADES: a framework for developing intelligent systems in manufacturing”, Proceedings of the IEEE Conference on Industrial Engineering and Engineering Management, Singapore, IEEE, Piscataway, NJ, pp. 1904‐8.
Correa, M., Bielza, C. and Pamies‐Teixeira, J. (2009), “Comparison of Bayesian networks and artificial neural networks for quality detection in a machining process”, Expert Systems with Applications, Vol. 36, pp. 7270‐9.
Du, S.C. and Xi, L.F. (2007), “Faults diagnosis based on system model in a discrete‐part machining system”, Proceedings of the IEEE Conference on Industrial Engineering and Engineering Management, Singapore, IEEE, Piscataway, NJ, pp. 1221‐5.
Eom, S. and Kim, E. (2006), “A survey of decision support system applications (1995‐2001)”, Journal of the Operational Research Society, Vol. 57, pp. 1264‐78.
Garcia, J.I., Morales, R.A.G. and Miyagi, P.E. (2008), “Supervisory system for hybrid productive systems based on Bayesian networks and OO‐DPT nets”, Proceedings of the IEEE Symposium on Emerging Technologies and Factory Automation, Hamburg, Germany, IEEE, Piscataway, NJ, pp. 1108‐11.
Gebus, S., Juuso, E. and Leiviska, K. (2009), “Knowledge‐based linguistic equations for defect detection through functional testing of printed circuit boards”, Expert Systems with Applications, Vol. 36, pp. 292‐302.
Gilabert, E. and Arnaiz, A. (2006), “Intelligent automation systems for predictive maintenance: a case study”, Robotics & Computer‐Integrated Manufacturing, Vol. 22, pp. 543‐9.
Jeong, I.‐J., Leon, V.J. and Villalobos, J.R. (2007), “Integrated decision‐support system for diagnosis, maintenance planning, and scheduling of manufacturing systems”, International Journal of Production Research, Vol. 45, pp. 267‐85.
Jones, B., Jenkinson, I., Yang, Z. and Wang, J. (2010), “The use of Bayesian network modelling for maintenance planning in a manufacturing industry”, Reliability Engineering & System Safety, Vol. 95, pp. 267‐77.
Kobbacy, K. and Vadera, S. (2009), “A survey of AI in operations management from 2005 to 2009”, Proceedings of the 4th European Conference on Intelligent Management Systems in Operations, Salford, UK, Operational Research Society, Birmingham, pp. 1‐21.
Kobbacy, K. and Vadera, S. (eds.) (2004), “Intelligent management systems in operations”, Journal of the Operational Research Society, Vol. 55 No. 2 (special issue).
Langseth, H. and Portinale, L. (2007), “Bayesian networks in reliability”, Reliability Engineering & System Safety, Vol. 92, pp. 92‐108.
Lauritzen, S.L. and Spiegelhalter, D.J. (1988), “Local computations with probabilities in graphical structures and their application to expert systems”, Journal of the Royal Statistical Society, Series B, Vol. 50, pp. 157‐224.
Liu, Y. and Jin, S. (2009), “Bayesian network approach for dimensional variation diagnosis in assembly process”, paper presented at the International Workshop on Intelligent Systems and Applications, Wuhan.
Lu, Y., Chen, T.‐Q. and Hamilton, B. (2000), “A fuzzy system for automotive fault diagnosis: fast rule generation and self‐tuning”, IEEE Transactions on Vehicular Technology, Vol. 49, pp. 651‐60.
McNaught, K.R. and Zagorecki, A. (2009), “Using dynamic Bayesian networks for prognostic modelling to inform maintenance decision making”, Proceedings of the IEEE Conference on Industrial Engineering and Engineering Management, Hong Kong, IEEE, Piscataway, NJ, pp. 1155‐9.
Masruroh, N.A. and Poh, K.L. (2007), “A Bayesian network approach to job‐shop rescheduling”, Proceedings of the IEEE Conference on Industrial Engineering and Engineering Management, Singapore, IEEE, Piscataway, NJ, pp. 1098‐102.
Muller, A., Suhner, M.‐C. and Iung, B. (2008), “Formalisation of a new prognosis model for supporting proactive maintenance implementation on industrial system”, Reliability Engineering & System Safety, Vol. 93, pp. 234‐53.
Ok, Z.D., Isaacs, J.A. and Benneyan, J.C. (2008), “Probabilistic and Monte Carlo risk models for carbon nanomaterial production processes”, paper presented at the IEEE International Symposium on Electronics and the Environment, San Francisco, CA.
Pearl, J. (1988), Probabilistic Reasoning in Intelligent Systems: Networks of Plausible Inference, Morgan Kaufmann, San Mateo, CA.
Penya, Y.K., Bringas, P.G. and Zabala, A. (2008), “Advanced fault prediction in high‐precision foundry production”, IEEE International Conference on Industrial Informatics, Daejeon, South Korea, IEEE, Piscataway, NJ, pp. 1672‐7.
Pourret, O., Naim, P. and Marcot, B. (Eds) (2008), Bayesian Networks: A Practical Guide to Applications, Wiley, Chichester.
Pradhan, S., Singh, R., Kachru, K. and Narasimhamurthy, S. (2007), “A Bayesian network based approach for root‐cause‐analysis in manufacturing process”, Proceedings of the International Conference on Computational Intelligence and Security, Harbin, China, IEEE, Piscataway, NJ, pp. 10‐14.
Proudlove, N.C., Vadera, S. and Kobbacy, K.A.H. (1998), “Intelligent management systems in operations: a review”, Journal of the Operational Research Society, Vol. 49, pp. 682‐99.
Romessis, C. and Mathioudakis, K. (2006), “Bayesian network approach for gas path fault diagnosis”, Journal of Engineering for Gas Turbines and Power Transactions of the ASME, Vol. 128, pp. 64‐72.
Sanseverino, M. and Cascio, F. (1997), “Model‐based diagnosis for automotive repair”, IEEE Expert, Vol. 12 No. 6, pp. 33‐7.
Srinivas, S. (1993), “A generalization of the noisy‐or model”, Proceedings of the 9th Conference on Uncertainty in Artificial Intelligence, Washington, DC, USA, pp. 208‐15.
Wang, H.‐C. and Wang, H.‐S. (2005), “A hybrid expert system for equipment failure analysis”, Expert Systems with Applications, Vol. 28, pp. 615‐22.
Wang, Y. and Tseng, M.M. (2008), “Defining specifications for custom products: a Bayesian probabilistic approach”, paper presented at the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, New York, NY.
Wolbrecht, E.D., Ambrosio, B., Paasch, R. and Kirby, D. (2000), “Monitoring and diagnosis of a multistage manufacturing process using Bayesian network”, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 14, pp. 53‐67.