Basic conditions for material and structural ratcheting

Adina R&D Inc., 1990 Bree, 1967, Elastic-plastic behavior of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements, J. Strain Anal., 2, 226, 10.1243/03093247V023226 Bruhns, 1992, Rigorous inelastic analysis methods, 181 Bruhns, 1989, The Interatom model, 16 Chaboche, 1989, Constitutive equations for cyclic plasticity and cyclic viscoplasticity, Int. J. Plast., 5, 247, 10.1016/0749-6419(89)90015-6 Chaboche, 1989, Constitutive modeling of ratcheting effects, Part I and Part II, J. Eng. Mater. Technol., 111, 384, 10.1115/1.3226484 Corum, 1981, Future needs for inelastic analysis in design of high-temperature nuclear plant components, Comput. Struct., 13, 231, 10.1016/0045-7949(81)90130-9 Corum, 1974, Interim guidelines for detailed inelastic analysis of high-temperature reactor system components Cousseran, 1980, Ratcheting—experimental tests and practical method of analysis Eisenberg, 1971, A theory of plasticity with non-coincident yield and loading surfaces, Acta Mech., 11, 247, 10.1007/BF01176559 Freudenthal, 1969, Second order effects in the theory of plasticity, Acta Mech., 8, 34, 10.1007/BF01178532 Hibbitt, Karlsson & Sorensen, Inc., 1989 Kastl, 1993, Strain limits for elevated temperature design-significance, necessity, usefulness—proposal of categorizing and improvement of design codes, Vol. E, 95 Krempl, 1992, Viscoplasticity theory based on overstress: the modelling of ratcheting and cyclic hardening of AISI type 304 stainless steel, Nucl. Eng. Des., 401, 10.1016/0029-5493(92)90165-R Lode, 1925, Versuche über den Einfluβ der mittleren Hauptspannung auf die Flieβgrenze, Z. Angew. Math. Mech., 5, 10.1002/zamm.19250050215 Lubahn, 1955, Bauschinger effect in creep and tensile tests on copper, J. Met., 1031 Maier, 1993, Bounds and estimates on inelastic deformation, Commission of the European Communities Reports WGCS-AG2, RA1-0162-I and RA1-0168-D McDowell, 1992, A bounding surface theory for cyclic thermoplasticity, J. Eng. Mater. Technol., 114, 297, 10.1115/1.2904176 Ohno, 1990, Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity, Appl. Mech. Rev., 43, 283, 10.1115/1.3119155 Ohno, 1991, On modeling of kinematic hardening for ratcheting behaviour Ohno, 1992, Nonisothermal constitutive modeling of inelasticity based on bounding surface, Nucl. Eng. Des., 133, 369, 10.1016/0029-5493(92)90163-P Ponter, 1985, An extended shakedown theory for structures that suffer cyclic thermal loading, Part 1 and Part 2, J. Appl. Mech., 52, 877, 10.1115/1.3169162 Ponter, 1990, The computation of shakedown limits for structural components subjected to variable thermal loading—Brussels diagrams, Commission of the European Communities Reports, WGCS-AG2, EUR 12686 EN Rice, 1975, Continuum mechanics and thermodynamics of plasticity in relation to microscale deformation mechanisms Ronay, 1966, Interaction of cyclic torsion with axial loads, 176 White, 1992, Simplified methods for the assessment of creep and plasticity effects in cyclic loading at high temperature, 201