Basic boiler cumulative distributions (fly ash, circulating material, bottom ash) — oxy-fuel and classical combustion conditions

Powder Technology - Tập 249 - Trang 536-548 - 2013
Jacek S. Leszczynski1
1Czestochowa University of Technology, Institute of Advanced Energy Technologies, ul. Dabrowskiego 73, 42-200 Czestochowa, Poland

Tài liệu tham khảo

Arena, 1983, Carbon attrition during the fluidized combustion of a coal, AICHE J., 29, 40, 10.1002/aic.690290106 Basu, 1977, Burning rate of carbon in fluidized beds, Fuel, 56, 390, 10.1016/0016-2361(77)90064-3 Basu, 2006 Bellgardt, 1987, Lateral non-uniformities of solids and gas concentrations in fluidized bed reactors, Powder Technol., 55, 205, 10.1016/0032-5910(87)80095-5 Bird, 2007 Bis, 1991 Chan, 1984, The effect of system pressure on the transport disengagement height (TDH) above bubbling gas-fluidized beds, AIChE Symp. Ser., 80, 24 Czakiert, 2012, Combustible matter conversion in an oxy-fuel circulating fluidized-bed (CFB) environment, Energy Fuel, 26, 5437, 10.1021/ef3011838 Field, 1967 Geldart, 1979, Effect of fines on entertainment from gas fluidised beds, Trans. Inst. Chem. Eng., 57, 269 Ghadiri, 2002, Impact attrition of particulate solids. Part 1: a theoretical model of chipping, Chem. Eng. Sci., 57, 3659, 10.1016/S0009-2509(02)00240-3 Ghislain, 2007 Kobylecki, 1998, Analysis and optimization of solid particle distribution in the fluidized bed boiler OFz-450 in era Power Station in Poland, 302 Kunii, 1991 Lakshmikantham, 2002 Leszczynski, 2002, Evaluation of structure and particle velocity distribution in circulating fluidised beds, Powder Technol., 128, 22, 10.1016/S0032-5910(02)00150-X Moran, 2009 Muschelknautz, 1972, Die berechnung von zyklonabscheidern fur gas, Chem. Ing. Tech., 71, 44 Oka, 2004 Press, 1993 Redemann, 2000, A particle population balancing model for a circulating fluidized bed combustion system, Powder Technol., 191, 78, 10.1016/j.powtec.2008.09.009 Seville, 2011, Processing of particulate solids Tanaka, 1972, Elutriation of fines from fluidized bed, J. Chem. Eng. Jpn., 5, 57, 10.1252/jcej.5.57 Tomeczek, 1991, A method of direct measurement of solid fuel particle ignition temperature, Proc. Combust. Inst., 23, 1163, 10.1016/S0082-0784(06)80376-0 Tomeczek, 1992 Wen, 1960, Elutriation of solid particles from a dense phase fluidized bed, AICHE J., 6, 220, 10.1002/aic.690060212 Wirth, 1991, Fluid mechanics of circulating fluidized beds, Chem. Eng. Technol., 14, 29, 10.1002/ceat.270140105 Zhang, 2002, Impact attrition of particulate solids. Part 2: experimental work, Chem. Eng. Sci., 57, 3671, 10.1016/S0009-2509(02)00241-5