Barriers to the Implementation of Building Information Modeling among Jordanian AEC Companies

Buildings - Tập 12 Số 2 - Trang 150
Esraa Hyarat1, Tasneem Hyarat2, Mustafa Al Kuisi2
1Department of Allied Engineering Sciences, Faculty of Engineering, Hashemite University, P.O. Box 330127, Zarqa 13133, Jordan
2Department of Geology, The University of Jordan, Amman, 11942, Jordan

Tóm tắt

Building Information Modeling (BIM) offers significant opportunities for construction management as it provides an effective method for design and documentation, supports communication and collaboration, and enhances the most important factors of a project (time, cost, and quality). The aim of this study is to investigate the barriers to BIM implementation at AEC (architecture, management, construction, and quantity survey) companies in Jordan, and to look at the similarities and differences in perceptions on the significance of these barriers between respondents from different AEC companies. To accomplish these objectives, a questionnaire survey was created to gather feedback on the 20 major barriers to BIM implementation identified through a comprehensive literature review. The top significant barriers were identified using the Relative Importance Index (RII) and Mean value; and to assess variances between respondents in the four AEC firms, a one-way analysis of variance (ANOVA) was used. From this, it was concluded that the “cost of training”, “cost of BIM software”, “insufficient BIM technical knowledge and awareness”, “lack of adequate BIM guidelines”, and “huge BIM up frontal investment” are the key barriers affecting the BIM implementation in Jordanian AEC companies. Considering this, this study provides an important step towards better understanding the implementation of BIM in Jordan.

Từ khóa


Tài liệu tham khảo

Cooke, B., and Williams, P. (2013). Construction Planning, Programming and Control, John Wiley & Sons.

Suermann, 2009, Evaluating Industry Perceptions of Building Information Modelling (BIM) Impact on Construction, J. Inf. Technol. Constr., 14, 574

National BIM Standard Project (2007). National Building Information Modeling Standard, Version 1, Part 1: Overview, Principles, and Methodologies, National Institutute of Building Sciences.

Vanlande, 2008, IFC and building lifecycle management, Autom. Constr., 18, 70, 10.1016/j.autcon.2008.05.001

Arayici, 2012, Building Information Modelling (BIM) Implementation and Remote Construction Projects: Issues, Challenges, and Critiques, J. Inf. Technol. Constr., 17, 75

Lill, 2019, An Overview of BIM Adoption in the Construction Industry: Benefits and Barriers, 10th Nordic Conference on Construction Economics and Organization, Volume 2, 297

Marefat, 2019, A BIM Approach for Construction Safety: Applications, Barriers and Solutions, ECAM, 26, 1855, 10.1108/ECAM-01-2017-0011

Azhar, 2011, Building Information Modeling (BIM): Trends, Benefits, Risks, and Challenges for the AEC Industry, Leadersh. Manag. Eng., 11, 241, 10.1061/(ASCE)LM.1943-5630.0000127

(2022, January 08). The Uptake of Advanced IT with Specific Emphasis on BIM by SMEs in the Jordanian Construction Industry-University of Salford Institutional Repository. Available online: http://usir.salford.ac.uk/id/eprint/35638/.

Department of Statistics (2021, July 01). Jordan in Figures 2016, Available online: http://dosweb.dos.gov.jo/wp-content/uploads/2017/11/JordanInFigures_2016.pdf.

Al Balkhy, W., Sweis, R., and Lafhaj, Z. (2021). Barriers to Adopting Lean Construction in the Construction Industry—The Case of Jordan. Buildings, 11.

Harris, B. (2017). Building Information Modeling and Construction Operations. [Ph.D. Thesis, San Diego State University].

Rice, 2010, The Perceived Value of Building Information Modeling in the US Building Industry, J. Inf. Technol. Constr., 15, 185

International Organization for Standardization (2016). ISO 29481-1:2016 Building Information Models-Information Delivery Manual-Part 1: Methodology and Format, International Organization for Standardization. Available online: https://www.iso.org/cms/render/live/en/sites/isoorg/contents/data/standard/06/05/60553.html.

Succar, 2009, Building Information Modelling Framework: A Research and Delivery Foundation for Industry Stakeholders, Autom. Constr., 18, 357, 10.1016/j.autcon.2008.10.003

Zhang, L.H. (2019). Building Information Modelling in the Canadian Architecture, Engineering, and Construction Industries. [Ph.D. Thesis, University of Toronto].

Eastman, C.M., Eastman, C., Teicholz, P., Sacks, R., and Liston, K. (2011). BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, John Wiley & Sons.

Rohena, R. (2011). Building Information Management (BIM) Implementation in Naval Construction. [Master’s Thesis, Louisiana State University].

Hergunsel, M.F. (2011). Benefits of Building Information Modeling for Construction Managers and BIM Based Scheduling. [Master’s Thesis, Worcester Polytechnic Institute].

Azhar, 2015, Building information modelling (BIM): Now and beyond, Constr. Econ. Build., 12, 15, 10.5130/AJCEB.v12i4.3032

Gholizadeh, 2018, Diffusion of Building Information Modeling Functions in the Construction Industry, J. Manag. Eng., 34, 4017060, 10.1061/(ASCE)ME.1943-5479.0000589

Wahab, A., and Wang, J. (2021). Factors-driven comparison between BIM-based and traditional 2D quantity takeoff in construction cost estimation. Eng. Constr. Arch. Manag., Ahead of print.

Azhar, S., Nadeem, A., Mok, J.Y., and Leung, B.H. (2008, January 4–5). Building Information Modeling (BIM): A New Paradigm for Visual Interactive Modeling and Simulation for Construction Projects. Proceedings of the First International Conference on Construction in Developing Countries, Karachi, Pakistan.

Bryde, 2013, The project benefits of Building Information Modelling (BIM), Int. J. Proj. Manag., 31, 971, 10.1016/j.ijproman.2012.12.001

Newton, 2012, Awareness, Usage and Benefits of Building Information Modelling (BIM) Adoption–the Case of the South Australian Construction Organisations, Management, 3, 12

Lee, C. (2008). BIM: Changing the AEC Industry. PMI Global Congress 2008, Project Management Institute.

Georgiadou, 2019, An overview of benefits and challenges of building information modelling (BIM) adoption in UK residential projects, Constr. Innov., 19, 298, 10.1108/CI-04-2017-0030

Matarneh, 2017, Barriers to the Adoption of Building Information Modeling in the Jordanian Building Industry, Open J. Civ. Eng., 07, 325, 10.4236/ojce.2017.73022

Mohammed, 2017, Barriers and Challenges of Building Information Modelling Implementation in Jordanian Construction Industry, Glob. J. Eng. Sci. Res. Manag., 7, 401

Gu, 2010, Understanding and facilitating BIM adoption in the AEC industry, Autom. Constr., 19, 988, 10.1016/j.autcon.2010.09.002

Elmualim, 2013, BIM: Innovation in design management, influence and challenges of implementation, Arch. Eng. Des. Manag., 10, 183

Vivas, 2017, Implementation of BIM in Spanish construction industry = Implementación BIM en la industria española de la construcción, Build. Manag., 1, 1

Hore, A., McAuley, B., and West, R. (2017). BIM in Ireland 2017. BIM Innovation Capability Programme, CitA Ltd.

Ismail, 2017, An Overview of BIM Uptake in Asian Developing Countries, AIP Conf. Proc., 1903, 080008, 10.1063/1.5011596

Harrison, 2015, BIM Implementation in a New Zealand Consultingquantity Surveying Practice, IJCSCM, 5, 1, 10.14424/ijcscm501015-01-15

Babatunde, 2020, Barriers to BIM implementation and ways forward to improve its adoption in the Nigerian AEC firms, Int. J. Build. Pathol. Adapt., 39, 48, 10.1108/IJBPA-05-2019-0047

Olanrewaju, 2020, Investigating the barriers to building information modeling (BIM) implementation within the Nigerian construction industry, Eng. Constr. Arch. Manag., 27, 2931, 10.1108/ECAM-01-2020-0042

Babatunde, 2021, An investigation into BIM uptake among contracting firms: An empirical study in Nigeria, J. Financial Manag. Prop. Constr., 26, 23

Alemayehu, S., Nejat, A., Ghebrab, T., and Ghosh, S. (2021). A Multivariate Regression Approach toward Prioritizing BIM Adoption Barriers in the Ethiopian Construction Industry. Eng. Constr. Archit. Manag. A head of Print.

Jamal, 2019, Challenges of Building Information Modelling (BIM) from the Malaysian Architect’s Perspective, MATEC Web Conf., 266, 5003, 10.1051/matecconf/201926605003

Reza, M.H., Azari, E., Tehran Institute of Technology, Tivendale, L., School of Architecture and Built Environment, Deakin University, Chileshe, N., and School of Natural and Built Environments, University of South Australia (2015, January 2–4). Barriers to Adoption of Building Information Modeling (BIM) in Iran: Preliminary Results. Proceedings of the 2015 (6th) International Conference on Engineering, Project, and Production Management; Association of Engineering, Project, and Production Management, Queensland, Australia.

Liu, 2015, Critical Barriers to BIM Implementation in the AEC Industry, Int. J. Mark. Stud., 7, 162, 10.5539/ijms.v7n6p162

Sriyolja, 2021, In Barriers to Implement Building Information Modeling (BIM) in Construction Industry: A Critical Review, Proceedings of the IOP Conference Series: Earth and Environmental Science, Volume 738, 012021

Hamada, 2016, Benefits and Barriers of BIM Adoption in the Iraqi Construction Firms, Int. J. Innov. Res. Adv. Eng., 3, 76

Siddiqui, 2019, Barriers in Adoption of Building Information Modeling in Pakistan’s Construction Industry, Indian J. Sci. Technol., 12, 1, 10.17485/ijst/2019/v12i25/142325

Gerges, 2017, An Investigation into the Implementation of Building Information Modeling in the Middle East, J. Inf. Technol. Constr., 22, 1

Ghavamimoghaddam, B., and Hemmati, E. (2017). Benefits and Barriers of BIM Implementation in Production Phase A Case Study within a Contractor Company. [Master’s Thesis, Chalmers University of Technolog].

Hatem, 2018, Barriers of adoption Building Information Modeling (BIM) in construction projects of Iraq, Eng. J., 22, 59, 10.4186/ej.2018.22.2.59

Taib, 2018, In Building Information Modelling: Challenges and Barriers in Implement of BIM for Interior Design Industry in Malaysia, Proceedings of the IOP Conference Series: Earth and Environmental Science, Langkawi, Malaysia, 4–5 December 2017, Volume 140, 12002

Chan, 2018, Critical Review of Studies on Building Information Modeling (BIM) in Project Management, Front. Eng., 5, 394

Yaakob, M., James, J., Nawi, M.N.M., and Radzuan, K. (2018, January 26–27). A Study on Benefits and Barriers of Implementing Building Information Modelling (BIM) in Construction Industry. Proceedings of the International Conference on Industrial Engineering and Operations Management, Paris, France.

Phellas, 2011, Structured Methods: Interviews, Questionnaires and Observation, Res. Soc. Cult., 3, 23

Bertram, D. (2021, July 15). Likert Scales. Topic Reports. Available online: http://poincare.matf.bg.ac.rs/~kristina/topic-dane-likert.pdf.

Allen, 2007, Likert Scales and Data Analyses, Qual. Prog., 40, 64

Nielsen, 2013, Quantification of Delay Factors Using the Relative Importance Index Method for Construction Projects in Turkey, J. Manag. Eng., 29, 133, 10.1061/(ASCE)ME.1943-5479.0000129

Assaf, 1995, Causes of Delay in Large Building Construction Projects, J. Manag. Eng., 11, 45, 10.1061/(ASCE)0742-597X(1995)11:2(45)

Odeh, 2002, Causes of construction delay: Traditional contracts, Int. J. Proj. Manag., 20, 67, 10.1016/S0263-7863(00)00037-5

Kotrlik, 2001, Organizational Research: Determining Appropriate Sample Size in Survey Research Appropriate Sample Size in Survey Research, Inf. Technol. Learn. Perform. J., 19, 43

Moskal, 2002, Validity, Reliability and the Assessment of Engineering Education, J. Eng. Educ., 91, 351, 10.1002/j.2168-9830.2002.tb00714.x

American Educational Research Association, American Psychological Association, and National Council on Measurement in Education (1999). Standards for Educational and Psychological Testing, American Educational Research Association.

Hair, J.F., Black, W.C., Babin, B.J., Anderson, R.E., and Tatham, R. (2006). Multivariate Data Analysis, Pearson Prentice Hall. [6th ed.]. Available online: https://www.pearson.com/uk/educators/higher-education-educators/program/Hair-Multivariate-Data-Analysis-6th-Edition/PGM476495.html.

Kim, 2017, Understanding one-way ANOVA using conceptual figures, Korean J. Anesthesiol., 70, 22, 10.4097/kjae.2017.70.1.22

Thông tin
Thông tin xuất bản

Buildings

Tập 12 Số 2

150

Thông tin tác giả