BN/SiBCN light-leakage-proof coatings of silica optical fiber for long term sensors at high temperatures

Zhu, 2018, Electroless nickel plating of fiber Bragg gratings and influence factors of coating properties, Surface Technol, 47, 241 Yang, 2018, Tensile strength and its influencing factors of the Ni-coated optic fiber, Laser Infrared, 48, 769 Xue, 2012, Application of optical fiber grating in health monitoring for aircraft structure, Aeronaut Manuf Technol, 418, 45 Yu, 2006, Applications of fiber Bragg grating sensor for aerospace composite and structures health monitoring, Laser J, 27, 1 Takeda, 2007, Damage detection in composites using optical fibre sensors, Proc Instit Mech Eng J Aerospace Eng, 221, 497, 10.1243/09544100JAERO148 Yu, 2019, The monitoring technique for shape reconstruction of variable camber trailing edge based on optical fiber sensor, Acta Aeronaut Astronaut Sinica Liu, 2011, Study on multiplexing ability of identical fiber Bragg gratings in a single fiber, Chinese J Aeronaut, 24, 607, 10.1016/S1000-9361(11)60071-X Zhang, 2018, FBG temperature sensor with quartz casing package, Metrol Meas Technol, 38, 11 Huang, 2020, Flight test technic for flap operation with optical fiber sensing, Acta Aeronaut Astronaut Sinica, 41 Hsiao, 2016, Metal-coated fiber Bragg grating for dynamic temperature sensor, Optik, 127, 10740, 10.1016/j.ijleo.2016.08.110 Bnbel, 1989, Mechanical reliability of metallized optical fiber for hermetic terminations, J Lightwave Technol, 7, 1488, 10.1109/50.39086 Jiang, 2008, Research of quartz optic fiber surface metallization for using in high-temperature, J Wuhan Univ Technol, 30, 1 Shiue, 2005, Effect of the coating thickness and roughness on the mechanical strength and thermally induced stress voids in nickel coated optical fiber prepared by electroless plating method, Thin Solid Films, 485, 169, 10.1016/j.tsf.2005.04.024 Riedel, 1996, A silicoboron carbonitride ceramic stable to 2000 °C, Nature, 382, 796, 10.1038/382796a0 Weinmann, 2000, Synthesis and thermal behavior of novel Si-B-C-N ceramic precursors, Chem Mater, 12, 623, 10.1021/cm9910299 Butchereit, 2001, Precursor-derived Si-B-C-N ceramics: oxidation kinetics, J Am Ceram Soc, 84, 2184, 10.1111/j.1151-2916.2001.tb00985.x Luan, 2019, Wet oxidation behavior of SiC/(SiC-SiBCN)x composites prepared by CVI combined with PIOP process, J Am Ceram Soc, 102, 6239, 10.1111/jace.16497 Kumar, 2006, Processing, crystallization and characterization of polymer derived nano-crystalline Si-B-C-N ceramics, J Mater Sci, 41, 7088, 10.1007/s10853-006-0934-6 Hu, 1997, Ceramic coatings on stainless steel via precursor pyrolysis, J Mater Eng, 3, 7 Bernard, 2005, Boron-modified polysilazane as a novel single-source precursor for SiBCN ceramic fiber: synthesis, melt-spinning, curing and ceramic conversion, J Mater Chem, 15, 289, 10.1039/b408295h Gao, 2013, Research progress of boron nitride composites, B Chin Ceram Soc, 32, 872 Li, 2011, Boron nitride coatings by chemical vapor deposition from borazine, Surf Coat Tech, 205, 3736, 10.1016/j.surfcoat.2011.01.032 Ma, 2016, Effect of heat treatment on the mechanical properties of SiCf/BN/SiC fabricated by CVI, Ceram Int, 42, 3652, 10.1016/j.ceramint.2015.11.030 Luan, 2019, Boron nitride coating of sapphire optical fiber for high temperature sensing applications, Surf Coat Tech, 363, 203, 10.1016/j.surfcoat.2019.02.002 Luan, 2016, A novel high temperature adhesive for bonding Al2O3 ceramic, Mat Sci Eng A-Struct, 651, 517, 10.1016/j.msea.2015.11.008 Luan, 2018, An air stable high temperature adhesive from modified SiBCN precursor synthesized via polymer-derived-ceramic route, Ceram Int, 44, 8476, 10.1016/j.ceramint.2018.02.045 Mu, 2014, Effects of BN/SiC dual-layer interphase on mechanical and dielectric properties of SiCf/SiC composites, Ceram Int, 40, 3411, 10.1016/j.ceramint.2013.09.091 Hajas, 2008, Tensile strength of Ni45Al45Cr7.5Ta2.5-coated sapphire fiber, J Am Ceram Soc, 91, 4009, 10.1111/j.1551-2916.2008.02754.x Hajas, 2008, Strength degradation mechanisms in h-BN/NiAl coated sapphire fiber with a reactive Hf or Y interlayer, Mat Sci Eng A-Struct, 491, 207, 10.1016/j.msea.2008.01.090 Curtin, 1994, In situ fiber strength in ceramic-matrix composites from fracture mirrors, J Am Ceram Soc, 77, 1075, 10.1111/j.1151-2916.1994.tb07272.x Guo, 2008, The analysis and testing on the transmission rate of the fiber-optic image slicer, Optoelectron Technol, 28, 93