Augmenting the productivity of solar still using multiple PCMs as heat energy storage

Water and Jobs, 2016

Financing Universal Water, 2017

Souvenir, 2016

The Water Gap – The State of the World's Water, 2018

Wild Water The State of the World's Water, 2017

Access to Safe and Affordable Drinking Water, 2018

International Desalination Association and Global Water Intelligence Release New Data in 30th Worldwide Desalting Inventory, 2017

Dsilva Winfred Rufuss, 2016, Solar stills: a comprehensive review of designs, performance and material advances, Renew. Sust. Energ. Rev., 63, 464, 10.1016/j.rser.2016.05.068

Velmurugan, 2008, Single basin solar still with fin for enhancing productivity, Energy Convers. Manag., 49, 2602, 10.1016/j.enconman.2008.05.010

Manikandan, 2013, Wick type solar stills: a review, Renew. Sust. Energ. Rev., 20, 322, 10.1016/j.rser.2012.11.046

Nijmeh, 2005, Experimental and theoretical study of a single- basin solar still in Jordan, Int. J. Heat Mass Transf., 32, 565, 10.1016/j.icheatmasstransfer.2004.06.006

Valsaraj, 2002, An experimental study on solar distillation in a single slope basin still by surface heating the water mass, Renew. Energy, 25, 607, 10.1016/S0960-1481(01)00094-5

El Sebaii, 2000, Year-round performance of a modified single-basin solar still with mica plate as a suspended absorber, Energy, 25, 35, 10.1016/S0360-5442(99)00037-7

Tenthani, 2012, Improved solar still for water purification, J. Sust. Energ. Environ., 3, 111

Ashok, 1991, Transient analysis of a double slope double basin solar distiller, Energy Convers. Manag., 31, 129, 10.1016/0196-8904(91)90065-Q

Deshmukh, 2017, Solar distillation with single basin solar still using sensible heat storage materials, Desalination, 410, 91, 10.1016/j.desal.2017.01.030

Murugavel, 2010, Single basin double slope solar still with minimum basin depth and energy storing materials, Appl. Energy, 87, 514, 10.1016/j.apenergy.2009.07.023

Sakthivel, 2008, Effect of energy storage medium (black granite gravel) on the performance of a solar still, Int. J. Energy Res., 32, 68, 10.1002/er.1335

Naima Mona, 2002, Non-conventional solar stills Part1. Non-conventional solar stills with charcoal particles as absorber medium, Desalination, 153, 55, 10.1016/S0011-9164(02)01093-7

Salah, 2009, Effect of various absorbing materials for the thermal performance of solar stills, Desalination, 242, 128, 10.1016/j.desal.2008.03.036

Harris Samuel, 2016, Improving the yield of fresh water in conventional solar still using low cost energy storage material’, Energy Convers. Manag., 112, 125, 10.1016/j.enconman.2015.12.074

El-Sebaii, 2009, Thermal performance of a single basin solar still with PCM as a storage medium, Appl. Energy, 86, 1187, 10.1016/j.apenergy.2008.10.014

Dashtban, 2011, Thermal analysis of a weir-type cascade solar still integrated with PCM storage, Desalination, 279, 415, 10.1016/j.desal.2011.06.044

Fath, 1998, Technical assessment of solar thermal energy storage technologies, Desalination, 14, 35

Su, 2015, Review of solid–liquid phase change materials and their encapsulation technologies, Renew. Sust. Energ. Rev., 48, 373, 10.1016/j.rser.2015.04.044

Vasu, 2017, Corrosion effect of phase change materials in solar thermal energy storage application, Renew. Sust. Energ. Rev., 76, 19, 10.1016/j.rser.2017.03.018

Yousef, 2019, Energetic and exergetic performance assessment of the inclusion of phase change materials (PCM) in a solar distillation system, Energy Convers. Manag., 179, 349, 10.1016/j.enconman.2018.10.078

Socaciu, 2012, Thermal energy storage with phase change material, Leonardo Electr. J. Pract. Technol., 20, 75

Pielichowska, 2014, Phase change materials for thermal energy storage, Prog. Mater Sci., 65, 67, 10.1016/j.pmatsci.2014.03.005

Ansari, 2013, Desalination of the brackish water using a passive solar still with a heat energy storage system, Desalination, 324, 10, 10.1016/j.desal.2013.05.017

Khan, 2016, A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility, Energy Convers. Manag., 115, 132, 10.1016/j.enconman.2016.02.045

Panchabikesan, 2018, Enhancement in free cooling potential through PCM based storage system integrated with direct evaporative cooling (DEC) unit, Energy, 144, 443, 10.1016/j.energy.2017.11.117

Panchabikesan, 2017, Effect of direct evaporative cooling during the charging process of phase change material based storage system for building free cooling application—a real time experimental investigation, Energy Build., 152, 250, 10.1016/j.enbuild.2017.07.037

Ettouney, 2006, Heat transfer enhancement in energy storage in spherical capsules filled with paraffin wax and beads’, Energy Convers. Manag., 47, 211, 10.1016/j.enconman.2005.04.003

Wei, 2005, Study on a PCM heat storage system for rapid heat supply, Appl. Therm. Eng., 25, 2903, 10.1016/j.applthermaleng.2005.02.014

Khodadadi, 2013, Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: a review, Renew. Sust. Energ. Rev., 24, 418, 10.1016/j.rser.2013.03.031

Kibria, 2015, A review on thermophysical properties of nanoparticle dispersed phase change materials, Energy Convers. Manag., 95, 69, 10.1016/j.enconman.2015.02.028

Elbahjaoui, 2017, Transient behavior analysis of the melting of nanoparticle-enhanced phase change material inside a rectangular latent heat storage unit, Appl. Therm. Eng., 112, 720, 10.1016/j.applthermaleng.2016.10.115

Colla, 2017, Nano-PCMs for enhanced energy storage and passive cooling applications, Appl. Therm. Eng., 110, 584, 10.1016/j.applthermaleng.2016.03.161

Karaipekli, 2017, Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes, Energy Convers. Manag, 134, 373, 10.1016/j.enconman.2016.12.053

Haillot, 2017, Synthesis and characterization of multifunctional energy composite: solar absorber and latent heat storage material of high thermal conductivity, Sol. Energy Mater. Sol. Cells, 161, 270, 10.1016/j.solmat.2016.12.010

Panchabikesan, 2019, Influence of PCM thermal conductivity and HTF velocity during solidification of PCM through the free cooling concept–a parametric study, J. Energy Storage, 21, 48, 10.1016/j.est.2018.11.005

Singh, 2017, Myoinositol based nano-PCM for solar thermal energy storage, Appl. Therm. Eng., 110, 564, 10.1016/j.applthermaleng.2016.08.202

Velraj, 1999, Heat transfer enhancement in a latent heat storage system, Solar Energy, 65, 171, 10.1016/S0038-092X(98)00128-5

Castell, 2008, Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins, Appl. Therm. Eng., 28, 1676, 10.1016/j.applthermaleng.2007.11.004

Zhou, 2011, Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials, Appl. Therm. Eng., 31, 970, 10.1016/j.applthermaleng.2010.11.022

Akhilesh, 2005, Method to improve geometry for heat transfer enhancement in PCM composite heat sinks, Int J Heat Mass Transfer, 48, 2759, 10.1016/j.ijheatmasstransfer.2005.01.032

Gharebaghi, 2007, Enhancement of heat transfer in latent heat storage modules with internal fins, Numer Heat Transfer, Part A, 53, 749, 10.1080/10407780701715786

Lacroix, 1997, Numerical simulation of natural convectiondominated melting and solidification from a finned vertical wall, Numer Heat Transfer, Part A Appl., 31, 71, 10.1080/10407789708914026

Shatikian, 2005, Numerical investigation of a PCM-based heat sink with internal fins, Int J Heat Mass Transf., 48, 3689, 10.1016/j.ijheatmasstransfer.2004.10.042

Leong, 2019, Nano-enhanced phase change materials: a review of thermo-physical properties, applications and challenges, J. Energy Storage, 21, 18, 10.1016/j.est.2018.11.008

Salunkhe, 2012, A review on effect of phase change material encapsulation on the thermal performance of a system, Renew. Sustain. Energy Rev., 16, 5603, 10.1016/j.rser.2012.05.037

Kwak, 2005, Viscosity and thermal conductivity of copper oxide nanofluid dispersed in ethylene glycol, Korea–Australia Rheol. J., 17, 35

Azari, 2013, Numerical study on the laminar convective heat transfer of alumina/water nanofluids, J. Thermo Phys. Heat Transf., 27, 170, 10.2514/1.T3834

Rubioa, 2000, Cavity geometry influence on mass flow rate for single and double slope solar stills, Appl. Therm. Eng., 20, 1105, 10.1016/S1359-4311(99)00085-X

Setoodeh, 2011, Modeling and determination of heat transfer coefficient in a basin solar still using CFD, Desalination, 268, 103, 10.1016/j.desal.2010.10.004

Manokar Muthu, 2014, Different parameters affecting the rate of evaporation and condensation on passive solar still – a review, Renew. Sustain. Energy Rev., 38, 309, 10.1016/j.rser.2014.05.092

Omara, 2017, The cooling techniques of the solar stills' glass covers – a review, Renew. Sust. Energ. Rev., 78, 176, 10.1016/j.rser.2017.04.085

Fatha, 2003, Thermal-economic analysis and comparison between pyramid-shaped and single-slope solar still configurations, Desalination, 159, 69, 10.1016/S0011-9164(03)90046-4

Salah, 2017, Analytical investigation of different operational scenarios of a novel greenhouse combined with solar stills, Appl. Thermal Eng., 122, 297, 10.1016/j.applthermaleng.2017.05.022

A. Strupstad, Error analysis of flow experiments. 2009.

Vigneswaran, 2019, Heat transfer studies on solar still assisted with and without latent heat storage material, Desalin. Water Treat., 140, 1, 10.5004/dwt.2019.23314

Petela, 2003, Exergy of undiluted thermal radiation, Solar Energy, 74, 469, 10.1016/S0038-092X(03)00226-3

Deniz, 2016, Energy, exergy, economic and environmental (4E) analysis of a solar desalination system with humidification-dehumidification, Energy Convers. Manag., 126, 12, 10.1016/j.enconman.2016.07.064