Atom probe study of radiation induced precipitates in Eurofer97 Ferritic-Martensitic steel irradiated in BOR-60 reactor

Lindau, R., Möslang, A., Rieth, M., Klimiankou, M., Materna-Morris, E., Alamo, A., Tavassoli, F., Cayron, C., Lancha, M., Fernandez, P., Baluc, N., Schaublin, R., Diegele, E., Filacchioni, G., Rensman, J.W., Schaaf, B.V.D., Lucon E., and Dietz, W., Present development status of EUROFER and ODS-EUROFER for application in blanket concepts, Fusion Eng. Des., 2005, vol. 75–79, pp. 989–996.

Tyumentsev, A.N., Chernov, V.M., Leont’eva-Smirnova, M.V., Astafurova, E.G., Shevyako, N.A., and Litovchenko, I.Yu., Microstructure of EK-181 ferritic-martensitic (12% Cr) steel after heat treatment under various conditions, Techn. Phys., 2012, vol. 57, pp. 48–54.

Rogozhkin, S.V., Iskandarov, N.A., Aleev, A.A., Zaluzhnyi, A.G., Nikitin, A.A., Leont’eva-Smirnova, M.V., and Mozhanov, E.M., Nanoscale study of ferriticmartensitic steel rusfer EK-181 after various heat treatments, Inorg. Mater.: Appl. Res., 2012, vol. 3, pp. 129–134.

Coppola, R., Lindau, R., May, R.P., Möslang, A., and Valli, M., Investigation of microstructural evolution under neutron irradiation in Eurofer-97 steel by means of small-angle neutron scattering, J. Nucl. Mater., 2009, vol. 386–388, pp. 195–198.

Materna-Morris, E., Möslang, A., Rolli, R., and Schneider, H.-C., Effect of helium on tensile properties and microstructure in 9%Cr-WVTa-steel after neutron irradiation up to 15 dpa between 250 and 450°C, J. Nucl. Mater., 2009, vol. 386–388, pp. 422–425.

Materna-Morris, E., Möslang, A., Rolli, R., and Schneider, H.-C., Effect of 16.3 Dpa neutron irradiation on fatigue lifetime of the RAFM steel EUROFER-97, Fus. Eng. Des., 2011, vol. 86, pp. 2607–2610.

Klimenkov, M., Materna-Morris, E., and Möslang, A., Characterization of radiation induced defects in EUROFER-97 after neutron irradiation, J. Nucl. Mater., 2011, vol. 417, pp. 124–126.

Weiss, O.J., Gaganidze, E., and Aktaa, J., Quantative TEM investigations on EUROFER-97 irradiated up to 32 dpa, Adv. Sci. Technol. (Faenza, Italy), 2010, vol. 73, pp. 118–123.

Gaganidze, E., Petersen, C., Materna-Morris, E., Dethloff, C., Wei, O.J., Aktaa, J., Povstyanko, A., Fedoseev, A., Makarov, O., and Prokhorov, V., Mechanical properties and TEM examination of RAFM steels irradiated up to 70 Dpa in BOR-60, J. Nucl. Mater., 2011, vol. 417, pp. 93–98.

Borodin, O.V., Bryk, V.V., Voyevodin, V.N., Neklyudov, I.M., and Shamardin, V.K., Investigation of microstructure of ferritic-martensitic steels containing 9 and 13% Cr irradiated with fast neutrons, J. Nucl. Mater., 1993, vol. 207, pp. 295–302.

Heintze, C., Ulbricht, A., Bergner, F., and Eckerlebe, H., The microstructure of neutron-irradiated Fe-Cr alloys: a small angle neutron scattering study, J. Nucl. Mater., 2011, vol. 409, pp. 106–111.

Miller, M.K., Atom Probe Tomography: Analysis at the Atomic Level, New York: Kluwer, 2000.

Aleev, A.A., Iskandarov, N.A., Klimenkov, M., Lindau, R., Möslang, A., Nikitin, A.A., Rogozhkin, S.V., Vladimirov, P., and Zaluzhnyi, A.G., Investigation of oxide particles in unirradiated ODS Eurofer by tomographic atom probe, J. Nucl. Mater., 2011, vol. 409, pp. 65–71.

Rogozhkin, S.V., Aleev, A.A., Zaluzhnyi, A.G., Nikitin, A.A., Iskandarov, N.A., Vladimirov, P., Lindau, R., and Möslang, A., Atom probe characterization of nano-scaled features in irradiated ODS Eurofer steel, J. Nucl. Mater., 2011, vol. 409, pp. 94–99.

Rogozhkin, S.V., Aleev, A.A., Zaluzhnyi, A.G., Iskandarov, N.A., Nikitin, A.A., Vladimirov, P., Lindau, R., and Möslang, A., Atom probe tomography of nanoscaled features of oxide-dispersion-strengthened ODS Eurofer steel in the initial state and after neutron irradiation, Phys. Met. Metallogr., 2012, vol. 113, pp. 98–105.

Petersen, C., Shamardin, V., Fedoseev, A., Shimansky, G., Efimov, V., and Rensman, J., The ARBOR irradiation project, J. Nucl. Mater., 2002, vol. 307–311, pp. 1655–1659.

Suvorov, A.L., Rogozhkin, S.V., Zaluzhnyi, A.G., Aleev, A.A., Bobkov, A.F., Zaitsev, S.V., Karpov, A.V., Kozodaev, M.A., Loginov, B.A., and Makeev, O.N., Atomic-scaled researches of reactor materials, Vopr. Atom. Nauki Tekhn., Ser. Materialov. Nov. Mater., 2006, vol. 1, pp. 3–13.

Menand, A., Cadel, E., Pareige, C., and Blavette, D., Three-dimensional atomic scale microscopy with the atom probe, Ultramicroscopy, 1999, vol. 78, pp. 63–72.

Arslan, I., Marquis, E.A., Homer, M., Hekmaty, M.A., and Bartlet, N.C., Towards better 3-D reconstructions by combining electron tomography and atom-probe tomography, Ultramicroscopy, 2008, vol. 108, pp. 1579–1585.

Rogozhkin, S.V., Ageev, V.S., Aleev, A.A., Zaluzhnyi, A.G., Leont’eva-Smirnova, M.V., and Nikitin, A.A., Tomographic atom-probe analysis of temperature-resistant 12%-chromium ferritic-martensitic EK-181 steel, Phys. Met. Metallogr., 2009, vol. 108, pp. 579–585.

Yamaguchi, Y., Takahashi, J., and Kawakami, K., The study of quantitativeness in atom probe analysis of alloying elements in steel, Ultramicroscopy, 2009, vol. 109, pp. 541–544.

Meslin, E., Radiguet, B., Pareige, P., and Barbu, A., Kinetic of solute clustering in neutron irradiated ferritic model alloys and a french pressure vessel steel investigated by atom probe tomography, J. Nucl. Mater., 2010, vol. 399, pp. 137–145.

Philippe, T., Duguay, S., and Blavette, D., Clustering and pair correlation function in atom probe tomography, Ultramicroscopy, 2010, vol. 110, pp. 862–865.

Russel, K.F. and Miller, M.K., Embrittlement of RPV steels: an atom probe tomography perspective, J. Nucl. Mater., 2007, vol. 371, pp. 145–160.

Miller, M.K., Atom probe tomography characterization of solute segregation to dislocations and interfaces, J. Mater. Sci., 2006, vol. 41, pp. 7808–7813.

Kuksenko, V., Pareige, C., Genevois, C., Cuvilly, F., Roussel, M., and Pareige, P., Effect of neutron irradiation on the microstructure of Fe-12 at % Cr alloy, J. Nucl. Mater., 2011, vol. 415, pp. 61–66.

Danoix, F. and Auger, P., Atom probe studies of the Fe-Cr system and stainless steels aged at intermediate temperature: a review, Mater. Charact., 2000, vol. 44, pp. 177–201.

Klimenkov, M., Lindau, R., Materna-Morris, E., and Möslang, A., TEM characterization of precipitates in EUROFER-97, Progress in Nuclear Energy, 2012, vol. 57, pp. 8–13.

Fernandez, P., Garcia-Mazario, M., Lancha, A.M., and Lapena, J., Grain boundary microchemistry and metallurgical characterization of Eurofer-97 after simulated service conditions, J. Nucl. Mater., 2004, vol. 329–333, pp. 273–277.

Fernandez, P., Lancha, A.M., Lapena, J., Serrano, M., and Hernandez-Mayoral, M., Metallurgical properties of reduced activation martensitic Eurofer-97 steel, in the as received condition and after thermal aging, J. Nucl. Mater., 2002, vol. 307–311, pp. 495–499.