Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design

Asian Journal of Civil Engineering - Tập 20 Số 1 - Trang 57-70 - 2019
Oveys Afzali-Naniz1, Moosa Mazloom1
1Department of Civil Engineering, Shahid Rajaee Teacher Training University, Lavizan, Tehran, Iran

Tóm tắt

Từ khóa


Tài liệu tham khảo

Afzali-Naniz, O., & Mazloom, M. (2018). Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete. Journal of Building Engineering, 20, 400–410.

Amin, M., & Abu El-Hassan, K. (2015). Effect of using different types of nano materials on mechanical properties of high strength concrete. Construction and Building Materials, 80, 116–124.

Ashenai Ghasemi, F., Daneshpayeh, S., & Ghasemi, I. (2017). Multi-response optimization of impact strength and elongation at break of nanocomposites based on polypropylene/polyethylene binary polymer matrix in the presence of titanium dioxide nanofiller. Journal of Elastomers and Plastics, 49(8), 633–649.

Ashtiani, M. S., Scott, A. N., & Dhakal, R. P. (2013). Mechanical and fresh properties of high-strength self-compacting concrete containing class C fly ash. Construction and Building Materials, 47, 1217–1224.

ASTM C 469. (2002). Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. West Conshohocken: Annual Book of ASTM Standards.

ASTM C642-97. (2006). Standard test method for density, absorption, and voids in hardened concrete. West Conshohocken: Annual Book of ASTM Standards.

Bahadori, H., & Hosseini, P. (2012). Reduction of cement consumption by the aid of silica nano-particles (investigation on concrete properties). Journal of Civil Engineering and Management, 18(3), 416–425.

Bernal, J., Reyes, E., Massana, J., León, N., & Sánchez, E. (2018). Fresh and mechanical behavior of a self-compacting concrete with additions of nano-silica, silica fume and ternary mixtures. Construction and Building Materials, 160, 196–210.

Beygi, M. H. A., Kazemi, M. T., Amiri, J. V., Nikbin, I. M., Rabbanifar, S., & Rahmani, E. (2014). Evaluation of the effect of maximum aggregate size on fracture behavior of self compacting concrete. Construction and Building Materials, 55, 202–211.

Beygi, M. H. A., Nikbin, I. M., & Amiri, J. V. (2013). The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete. Materials and Design, 50, 267–276.

BS EN 12390. (2000). Testing hardened concrete, method of determination of compressive strength of concrete cubes. UK: British Standards Institution.

Chithra, S., Kumar, S. R. R. S., & Chinnaraju, K. (2016). The effect of colloidal nano-silica on workability, mechanical and durability properties of high performance concrete with copper slag as partial fine aggregate’. Construction and Building Materials, 113, 794–804.

EFNARC. (2002). Specification and guidelines for self-compacting concrete. Norfolk: European Federation for Specialist Construction Chemicals and Concrete Systems.

Felekoglu, B. S., & Türkel, B. B. (2007). Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete. Building and Environment, 42(4), 1795–1802.

George, E., Hunter, J. S., & Hunter, W. G. (2005). Statistics for experimenters: design, innovation and discovery (4th ed.). New York: Wiley.

Güneyisi, E., Gesoglu, M., Azez, O. A., & Öznur, H. O. (2016). Effect of nano silica on the workability of self-compacting concretes having untreated and surface treated lightweight aggregates. Construction and Building Materials, 115, 371–380.

Güneyisi, E., Gesoʇlu, M., Booya, E., & Mermerdaş, K. (2015). Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate. Construction and Building Materials, 74, 17–24.

Holschmacher, K., & Klug, Y. (2002). A database for the evaluation of hardened properties of SCC. Lacer, 7, 123–134.

Hosseini, P., Booshehrian, A., & Farschi, S. (2010). Influence of nano-SiO2 addition on microstructure and mechanical properties of cement mortars for ferrocement. Transportation Research Record, 2141, 15–20.

Hosseinpourpia, R., Varshoee, A., Soltani, M., Hosseini, P., & Tabari, H. Z. (2012). Production of waste bio-fiber cement-based composites reinforced with nano-SiO2 particles as a substitute for asbestos cement composites. Construction and Building Materials, 31, 105–111.

Hover, K. C. (2011). The influence of water on the performance of concrete’. Construction and Building Materials, 25(7), 3003–3013.

Jalal, M., Mansouri, E., Sharifipour, M., & Pouladkhan, A. R. (2012). Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles. Materials and Design, 34, 389–400.

Jalal, M., Pouladkhan, A., Harandi, O. F., & Jafari, D. (2015). Comparative study on effects of class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete. Construction and Building Materials, 94, 90–104.

Karamloo, M., Mazloom, M., & Payganeh, G. (2016a). Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete’. Engineering Fracture Mechanics, 168, 227–241.

Karamloo, M., Mazloom, M., & Payganeh, G. (2016b). Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete. Construction and Building Materials, 123, 508–515.

Karamloo, M., Mazloom, M., & Payganeh, G. (2017). Effect of size on nominal strength of self-compacting lightweight concrete and self-compacting normal weight concrete: a stress-based approach. Materials Today Communication, 13, 36–45.

Klug, Y., & Holschemacher, K. (2003). Comparison of the hardened properties of self-compacting and normal vibrated concrete. In 3rd RILEM symposium on self compacting concrete, Reykjavik, pp. 596–605.

Kong, D., Corr, D. J., Hou, P., Yang, Y., & Shah, S. P. (2015). Influence of colloidal silica sol on fresh properties of cement paste as compared to nano-silica powder with agglomerates in micron-scale. Cement and Concrete Composites, 63, 30–41.

Kong, D., Du, X., Wei, S., Zhang, H., Yang, Y., & Shah, S. P. (2012). Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials. Construction and Building Materials, 37, 707–715.

Lachemi, M., Bae, S., Hossain, K. M. A., & Sahmaran, M. (2009). Steel–concrete bond strength of lightweight self-consolidating concrete. Materials and Structures, 42(7), 1015–1023. (Springer).

Li, L. G., Huang, Z. H., Zhu, J., Kwan, A. K. H., & Chen, H. Y. (2017). Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar. Construction and Building Materials, 140, 229–238.

Lukic, I., Radonjanin, V., Malesev, M. & Bulatovic, V. (2015). Influence of mineral admixture on water absorption of lightweight aggregate concrete, 13th International scientific conference on planning, design, construction and building renewal, Novi Sad.

Mazloom, M., Allahabadi, A., & Karamloo, M. (2017). Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties, and ultrasonic response of SCLC. Advances in Concrete Construction, 5(6), 587–611.

Mazloom, M., Homayooni, S. M., & Miri, S. M. (2018). Effect of rock flour type on rheology and strength of self-compacting lightweight concrete. Computers and Concrete, 21(2), 199–207.

Mazloom, M., & Mahboubi, F. (2017). Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete. Computers and Concrete, 19(2), 203–210.

Mazloom, M., Ramezanianpour, A. A., & Brooks, J. J. (2004). Effect of silica fume on mechanical properties of high-strength concrete. Cement and Concrete Composites, 26(4), 347–357.

Mazloom, M., Saffari, A., & Mehrvand, M. (2015). Compressive, shear and torsional strength of beams made of self-compacting concrete. Computers and Concrete, 15(6), 935–950.

Mazloom, M., & Yoosefi, M. M. (2013). Predicting the indirect tensile strength of self-compacting concrete using artificial neural networks. Computers and Concrete, 12(3), 285–301.

Montgomery, D. C. (2017). Design and analysis of experiments. Hoboken: Wiley.

Mukharjee, B. B., & Barai, S. V. (2014). Assessment of the influence of nano-silica on the behavior of mortar using factorial design of experiments. Construction and Building Materials, 68, 416–425.

Najigivi, A., Khaloo, A., Iraji Zad, A., & Abdul Rashid, S. (2013). Investigating the effects of using different types of SiO2 nanoparticles on the mechanical properties of binary blended concrete. Composites Part B Engineering, 54(1), 52–58.

Nili, M., & Ehsani, A. (2015). Investigating the effect of the cement paste and transition zone on strength development of concrete containing nanosilica and silica fume. Materials and Design, 75, 174–183.

Parra, C., Valcuende, M., & Gómez, F. (2011). Splitting tensile strength and modulus of elasticity of self-compacting concrete. Construction and Building Materials, 25(1), 201–207.

Pentti, G. H.-E. P. (1999). Properties of SCC-especially early age and long term shrinkage and salt frost resistance. In Proceedings of the 1 st International Rilem Symposium on Self-compacting Concrete, Stockholm. Rilem, Bagneux, pp. 211–225.

Persson, B. (2001). A comparison between mechanical properties of self-compacting concrete and the corresponding properties of normal concrete. Cement and Concrete Research, 31(20), 193–198.

Puentes, J., Barluenga, G., & Palomar, I. (2015). Effect of silica-based nano and micro additions on SCC at early age and on hardened porosity and permeability. Construction and Building Material, 81, 154–161.

Ranjbar, M. M., & Mousavi, S. Y. (2015). Strength and durability assessment of self-compacted lightweight concrete containing expanded polystyrene. Mater Struct, 48(4), 1001–1011.

Salehi, H. & Mazloom, M. (2018a). Effect of magnetic-field intensity on fracture behaviors of self-compacting lightweight concrete, Magazine of Concrete Research, 1-15.

Salehi, H., & Mazloom, M. (2018b). Experimental and numerical studies of crack propagation in self-compacting lightweight concrete. Modares Mechanical Engineering, 18(6), 667–678.

Saloma, Nasution, A., Imran, I., & Abdullah, M. (2013). Experimental investigation on nanomaterial concrete. International Journal of Civil and Environmental Engineering, 13(3), 15–20.

Schutter, G. D., & Audenaert, K. (2004). Evaluation of water absorption of concrete as a measure for resistance against carbonation and chloride migration. Materials and Structures, 37, 591–596.

Siddique, R. (2011). Resources, conservation and recycling utilization of silica fume in concrete: review of hardened properties’. Resources, Conservation and Recycling, 55(11), 923–932.

Singh, L. P., Karade, S. R., Bhattacharyya, S. K., Yousuf, M. M., & Ahalawat, S. (2013). Beneficial role of nanosilica in cement based materials—a review. Construction and Building Materials, 47, 1069–1077.

Wu, Z., Zhang, Y., Zheng, J., & Ding, Y. (2009). An experimental study on the workability of self-compacting lightweight concrete. Construction and Building Materials, 23(5), 2087–2092.