Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength

Richard P, Cheyrezy M (1995) Composition of reactive powder concretes. Cem Concr Res 25(7):1501–1511

Pansuk W, Sato H, Sato Y, Shionaga R (2008) Tensile behaviors and fibre orientation of UHPC. Proceedings of second international symposium on ultra high performance concrete, Kassel, Germany, March 2008 (Kassel University Press), pp 161–168

Kim SW, Kang ST, Park JJ, Ryu GS (2008) Effect of filling method on fibre orientation and dispersion and mechanical properties of UHPC. Proceedings of second international symposium on ultra high performance concrete, Kassel, Germany, March 2008 (Kassel University Press), pp 185–192

Ferrara L, Meda A (2006) Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements. Mater Struct 39:411–420

Ultra-high performance fibre-reinforced concretes: interim recommendations (2002) Association Française de Génie (AFGC), Paris, France

Dupont D, Vandewalle L (2005) Distribution of steel fibres in rectangular sections. Cem Concr Compos 27(3):391–398

Université Bordeaux1 (2002) Evaluation non destructive de l’état d’endommagement des ouvrages en béton armé par mesures de résistivité électrique. Université Bordeaux1, Bordeaux, France

Sirieix C, Lataste J-F, Breysse D, Naar S, Dérobert X (2007) Comparison of nondestructive testing: infrared thermography, electrical resistivity and capacity methods for assessing a reinforced concrete structure. J Build Apprais 3(1):77–88

Standard test method for flexural toughness of fiber reinforced concrete (using centrally loaded round panel) (2003) American Society for Testing and Materials, West Conshohocken, PA, USA

Method of tests for flexural strength and flexural toughness of steel fiber reinforced concrete (1983) JCI standards for test methods of fibre reinforced concrete, Japan Concrete Institute, pp 45–51

Rasband W (2008) ImageJ. National Institutes of Health, USA. http://rsb.info.nih.gov/ij/

Krenchel H (1975) Fibre spacing and specific fibre surface. Proceedings of RILEM symposium on fibre reinforced cement and concrete, London, September 1975. Construction Press, pp 69–79

Dupont D, Vandewalle L (2004) Comparison between the round plate test and the RILEM 3-point bending test. Proceedings of 6th RILEM symposium on fibre-reinforced concretes (FRC), Varenna, Italy, September 2004. RILEM Publications S.A.R.L., pp 101–110

Le TT, Soutsos MN, Millard SG, Barnett SJ (2007) UHPFRC—optimisation of mix proportions. Proceedings of concrete Platform, Belfast, 19–20 April 2007. Queen’s University of Belfast, pp 339–348