Assessing the corrosion of biodegradable magnesium implants: A critical review of current methodologies and their limitations
Tóm tắt
Từ khóa
Tài liệu tham khảo
Witte, 2010, The history of biodegradable magnesium implants: a review, Acta Biomater, 6, 1680, 10.1016/j.actbio.2010.02.028
Staiger, 2006, Magnesium and its alloys as orthopedic biomaterials: a review, Biomaterials, 27, 1728, 10.1016/j.biomaterials.2005.10.003
Schranz, 2006, Bioabsorbable metal stents for percutaneous treatment of critical recoarctation of the aorta in a newborn, Catheter Cardiovasc Interv, 67, 671, 10.1002/ccd.20756
Vojtěch, 2004
Seal CK, Vince K, Hodgson MA. Biodegradable surgical implants based on magnesium alloys: a review of current research. IOP Conference Series: Materials Science and Engineering 2009:012011.
Witte, 2006, In vitro and in vivo corrosion measurements of magnesium alloys, Biomaterials, 27, 1013, 10.1016/j.biomaterials.2005.07.037
Zhang, 2010, Research of Mg–Zn alloy as degradable biomaterial, Acta Biomater, 6, 626, 10.1016/j.actbio.2009.06.028
Wong, 2010, A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants, Biomaterials, 31, 2084, 10.1016/j.biomaterials.2009.11.111
Li, 2008, The development of binary Mg–Ca alloys for use as biodegradable materials within bone, Biomaterials, 29, 1329, 10.1016/j.biomaterials.2007.12.021
Ren, 2007, Study of biodegradation of pure magnesium, Key Eng Mater, 342–343, 601, 10.4028/www.scientific.net/KEM.342-343.601
Xu, 2009, In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy, Biomaterials, 30, 1512, 10.1016/j.biomaterials.2008.12.001
Ren, 2007, Preliminary study of biodegradation of AZ31B magnesium alloy, Front Mater Sci Chin, 1, 401, 10.1007/s11706-007-0073-2
Shaw, 2005, Corrosion of magnesium and magnesium-base alloys, 205
Yamamoto, 2009, Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in vitro, Mater Sci Eng C, 29, 1559, 10.1016/j.msec.2008.12.015
Al-Abdullat, 2001, Surface modification of magnesium by NaHCO3 and corrosion behavior in Hank’s solution for new biomaterial applications, Mater Trans, 42, 1777, 10.2320/matertrans.42.1777
Krause C, Bormann D, Hassel T, Bach FW, Windhagen H, Krause A, et al. Mechanical properties of degradable magnesium implants in dependence of the implantation duration. In: Pekguleryuz M, editors. Conference of metallurgists: magnesium technology in the global age, Montreal, 2006. p. 329–43.
Xin, 2007, Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids, J Mater Res, 22, 2004, 10.1557/jmr.2007.0233
Denkena B, Podolsky C, Lucas A, Hassel T, Witte F, Palm O, et al. Degradable implants made of magnesium alloys. In: 5th Euspen international conference, Montpellier, 2005.
Denkena, 2007, Biocompatible magnesium alloys as absorbable implant materials – adjusted surface and subsurface properties by machining processes, CIRP Ann Manuf Technol, 56, 113, 10.1016/j.cirp.2007.05.029
Cui, 2008, Calcium phosphate coating on magnesium alloy for modification of degradation behavior, Front Mater Sci Chin, 2, 143, 10.1007/s11706-008-0024-6
Denkena B, Witte F, Podolsky C, Lucas A. Degradable implants made of magnesium alloys. In: 5th EUSpen international conference, Montpellier, 2005.
Yfantis, 2006
Hort, 2010, Magnesium alloys as implant materials – principles of property design for Mg–RE alloys, Acta Biomater, 6, 1714, 10.1016/j.actbio.2009.09.010
Inoue, 2002, Corrosion rate of magnesium and its alloys in buffered chloride solutions, Corros Sci, 44, 603, 10.1016/S0010-938X(01)00092-0
Kirkland, 2010, A survey of bio-corrosion rates of magnesium alloys, Corros. Sci., 52, 287, 10.1016/j.corsci.2009.09.033
Li, 2004, Evaluation of cyto-toxicity and corrosion behavior of alkali-heat-treated magnesium in simulated body fluid, Surf Coat Technol, 185, 92, 10.1016/j.surfcoat.2004.01.004
Liu, 2007, Influence of heat treatment on degradation behavior of bio-degradable die-cast AZ63 magnesium alloy in simulated body fluid, Mater Sci Eng A, 456, 350, 10.1016/j.msea.2006.12.020
Liu, 2007, Degradation susceptibility of surgical magnesium alloy in artificial biological fluid containing albumin, J Mater Res, 22, 1806, 10.1557/jmr.2007.0241
Lopez, 2006, In vitro bioactivity assessment of metallic magnesium, Key Eng Mater, 309–311, 453, 10.4028/www.scientific.net/KEM.309-311.453
Pietak, 2007, Bone-like matrix formation on magnesium and magnesium alloys, J Biomed Mater Res, 19, 407
Vojtěch, 2006, Investigation of magnesium-based alloys for biomedical applications, Kovove Mater, 211
Wang, 2007, The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31, Adv Eng Mater, 9, 967, 10.1002/adem.200700200
Wang, 2008, Bio-corrosion of a magnesium alloy with different processing histories, Mater Lett, 62, 2476, 10.1016/j.matlet.2007.12.052
Wang, 2008, Magnesium and magnesium alloys as degradable metallic biomaterials, Adv Mater Res, 32, 207, 10.4028/www.scientific.net/AMR.32.207
Wang, 2009, Corrosion behaviour of magnesium alloy AZ53 in simulated body fluids, Mater Sci Forum, 610–613, 1174, 10.4028/www.scientific.net/MSF.610-613.1174
Wang, 2009, Improve corrosion resistance of magnesium in simulated body fluid by dicalcium phosphate dihydrate coating, Mater Sci Eng C, 29, 1311, 10.1016/j.msec.2008.09.051
Wang, 2008, Corrosion process of pure magnesium in simulated body fluid, Mater Lett, 62, 2185
Wen, 2009, Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid, J Alloy Compd, 488, 392, 10.1016/j.jallcom.2009.08.147
Witte, 2007, Biodegradable magnesium–hydroxyapatite metal matrix composites, Biomaterials, 28, 2163, 10.1016/j.biomaterials.2006.12.027
Yang, 2009, Characterization and degradation study of calcium phosphate coating on magnesium alloy bone implant in vitro, Plasma Sci, IEEE Trans, 37, 1161, 10.1109/TPS.2009.2016664
Yang, 2009, Biocorrosion behavior of magnesium alloy in different simulated fluids for biomedical application, Mater Sci Eng C, 29, 1691, 10.1016/j.msec.2009.01.014
Yfantis, 2006, New magnesium alloys for bone tissue engineering: in vitro corrosion testing, WSEAS Trans Environ Dev, 2, 1110
Yun, 2009, Biodegradable Mg corrosion and osteoblast cell culture studies, Mater Sci Eng C, 29, 1814, 10.1016/j.msec.2009.02.008
Zhou, 2010, Effect of heat treatment on corrosion behaviour of magnesium alloy AZ91D in simulated body fluid, Corros Sci, 52, 1035, 10.1016/j.corsci.2009.11.030
Zhuang, 2008, Preparation, mechanical properties and in vitro biodegradation of porous magnesium scaffolds, Mater Sci Eng C, 28, 1462, 10.1016/j.msec.2008.04.001
Hazan, 2005, EIS study of corrosion behaviour of AZ91 and AM50 alloys
Ghali, 2004, Testing of general and localized corrosion of magnesium alloys: a critical review, J. Mater Eng Perform, 13, 517, 10.1361/10599490420665
Lunder, 1994, Corrosion morphologies on magnesium alloy AZ 91, Mater Corros, 45, 331, 10.1002/maco.19940450603
Song, 2004, Corrosion resistance of aged die cast magnesium alloy AZ91D, Mater Sci Eng A, 366, 74, 10.1016/j.msea.2003.08.060
Von Der Höh, 2006, The influence of difference surface machining treatments of resorbable implants of different magnesium alloys – a primary study in rabbits, Biomaterialien, 7, 122
Wu, 2005, The effect of Ca and rare earth elements on the microstructure, mechanical properties and corrosion behavior of AZ91D, Mater Sci Eng A, 408, 255, 10.1016/j.msea.2005.08.011
Yan, 2010, Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy, Mater Sci Eng C, 30, 740, 10.1016/j.msec.2010.03.007
Shi, 2011, An innovative specimen configuration for the study of Mg corrosion, Corros Sci, 53, 226, 10.1016/j.corsci.2010.09.016
Winston, 2008, Thermodynamics: Pourbaix diagrams, 43
Lorenz, 2009, Effect of surface pre-treatments on biocompatibility of magnesium, Acta Biomater, 5, 2783, 10.1016/j.actbio.2009.04.018
Ng, 2010, Effect of pH on the in vitro corrosion rate of magnesium degradable implant material, Mater Sci Eng C, 30, 898, 10.1016/j.msec.2010.04.003
International, 2004
Zhang, 2010, Comparison of calcium phosphate coatings on Mg–Al and Mg–Ca alloys and their corrosion behavior in Hank’s solution, Surf Coat Technol, 204, 3636, 10.1016/j.surfcoat.2010.04.038
Song, 2001, An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys, 255
Hänzi AC, Weder MM, Gerold B, Uggowitzer PJ. New bio-absorbable magnesium alloys for medical applications. In: Light metals technology conference, Canada, 2007.
Bender, 2007, Corrosion and corrosion testing of magnesium alloys, Mater Corros, 58, 977, 10.1002/maco.200704091
Chang, 2007, Effect of heat treatment on corrosion and electrochemical behaviour of Mg–3Nd–0.2Zn–0.4Zr (wt.%) alloy, Electrochim Acta, 52, 3160, 10.1016/j.electacta.2006.09.069
Gu, 2009, In vitro corrosion and biocompatibility of binary magnesium alloys, Biomaterials, 30, 484, 10.1016/j.biomaterials.2008.10.021
Kim, 2008, Influence of Ca on the corrosion properties of magnesium for biomaterials, Mater Lett, 62, 4146, 10.1016/j.matlet.2008.06.028
Lee, 2009, Effects of impurities on the biodegradation behavior of pure magnesium, Met Mater Int, 15, 955, 10.1007/s12540-009-0955-1
Liu, 2010, In vitro corrosion degradation behaviour of Mg–Ca alloy in the presence of albumin, Corros Sci, 52, 3341, 10.1016/j.corsci.2010.06.003
Pardo, 2008, Corrosion behaviour of magnesium/aluminium alloys in 3.5wt.% NaCl, Corros Sci, 50, 823, 10.1016/j.corsci.2007.11.005
Scharf, 2005, Corrosion of AZ 91 secondary magnesium alloy, Adv Eng Mater, 7, 1134, 10.1002/adem.200500180
Seelig, 1924, A study of magnesium wire as an absorbable suture and ligature material, Arch Surg, 8, 669, 10.1001/archsurg.1924.01120050210011
Shi, 2010, Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation, Corros Sci, 52, 579, 10.1016/j.corsci.2009.10.016
Song, 2005, Recent progress in corrosion and protection of magnesium alloys, Adv Eng Mater, 7, 563, 10.1002/adem.200500013
Song, 2007, Control of biodegradation of biocompatible magnesium alloys, Corros Sci, 49, 1696, 10.1016/j.corsci.2007.01.001
Song, 2003, Understanding magnesium corrosion: a framework for improved alloy performance, Adv Eng Mater, 5, 837, 10.1002/adem.200310405
Song, 1998, Influence of microstructure on the corrosion of diecast AZ91D, Corros Sci, 41, 249, 10.1016/S0010-938X(98)00121-8
Song, 1997, The anodic dissolution of magnesium in chloride and sulphate solutions, Corros Sci, 39, 1981, 10.1016/S0010-938X(97)00090-5
Song, 1997, The electrochemical corrosion of pure magnesium in 1N NaCl, Corros Sci, 39, 855, 10.1016/S0010-938X(96)00172-2
Song, 2007, A possible biodegradable magnesium implant material, Adv Eng Mater, 9, 298, 10.1002/adem.200600252
Song, 2005, Corrosion of magnesium alloys in commercial engine coolants, Mater Corros, 56, 15, 10.1002/maco.200403803
Thomaz, 2010, The negative difference effect of magnesium and of the AZ91 alloy in chloride and stannate containing solutions, Corros Sci, 52, 2235, 10.1016/j.corsci.2010.03.010
Zberg, 2009, MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants, Nat Mater, 8, 887, 10.1038/nmat2542
Zeng, 2008, Progress and challenge for magnesium alloys as biomaterials, Adv Eng Mater, 10, B3, 10.1002/adem.200800035
Zhao, 2008, Influence of microstructure on corrosion of as-cast ZE41, Adv Eng Mater, 10, 104, 10.1002/adem.200700246
Zhao, 2008, Influence of the [beta]-phase morphology on the corrosion of the Mg alloy AZ91, Corros Sci, 50, 1939, 10.1016/j.corsci.2008.04.010
Zhao, 2008, Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41, Corros Sci, 50, 3168, 10.1016/j.corsci.2008.08.023
Zhao, 2009, An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing, Corros Sci, 51, 1277, 10.1016/j.corsci.2009.03.014
Baranenko, 1989, Solubility of hydrogen in water in a broad temperature and pressure range, At Energ, 66, 30, 10.1007/BF01121069
Crozier, 1974, Solubility of hydrogen in water, sea water, and sodium chloride solutions, J Chem Eng Data, 19, 242, 10.1021/je60062a007
Barton RS. The permeability of some plastic materials to H2, He, N2, O2, and A. Atomic Energy Research Establishment Report, 1960.
Piskarev, 2010, Establishment of the redox potential of water saturated with hydrogen, Biophysics, 55, 13, 10.1134/S0006350910010033
He, 2009, Effect of Y on the bio-corrosion behavior of extruded Mg–Zn–Mn alloy in Hank’s solution, Mater Sci Eng C, 30, 167, 10.1016/j.msec.2009.09.014
Widmaier, 2010
Hassel, 2007, Influence of the alloy composition on the mechanical and electrochemical properties of binary Mg–Ca alloys and its corrosion behaviour in solutions at different chloride concentrations, 789
Lin, 2005, Effects of aluminium addition on magnesium–lithium–zinc alloy, 275
Alvarez-Lopez, 2010, Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids, Acta Biomater, 6, 1763, 10.1016/j.actbio.2009.04.041
Barranco, 2010, Electrochemical study of tailored sol–gel thin films as pre-treatment prior to organic coating for AZ91 magnesium alloy, Prog Org Coat, 68, 347, 10.1016/j.porgcoat.2010.02.009
Birbilis, 2008, Corrosion of pure Mg as a function of grain size and processing route, Adv Eng Mater, 10, 579, 10.1002/adem.200800046
Blawert, 2008, Correlation between texture and corrosion properties of magnesium coatings produced by PVD, Surf Coat Technol, 202, 2236, 10.1016/j.surfcoat.2007.08.008
Cheng, 2005, Corrosion behavior of titanium in the presence of calcium phosphate and serum proteins, Biomaterials, 26, 7350, 10.1016/j.biomaterials.2005.05.047
Chiu, 2007, Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants, Surf Coat Technol, 202, 590, 10.1016/j.surfcoat.2007.06.035
Duffo, 2004, Development of an artificial saliva solution for studying the corrosion behaviour of dental alloys, Corrosion, 60, 594, 10.5006/1.3287764
Eliezer, 2010, Corrosion behaviour of magnesium alloys in biomedical environments, Adv Mater Res, 95, 17, 10.4028/www.scientific.net/AMR.95.17
Fekry, 2009, Electrochemical corrosion behavior of magnesium and titanium alloys in simulated body fluid, Electrochim Acta, 54, 7280, 10.1016/j.electacta.2009.07.047
Gu, 2006, High corrosion-resistance nanocrystalline Ni coating on AZ91D magnesium alloy, Surf Coat Technol, 200, 5413, 10.1016/j.surfcoat.2005.07.001
Gu, 2009, Influence of artificial biological fluid composition on the biocorrosion of potential orthopedic Mg–Ca, AZ31, AZ91 alloys, Biomed Mater, 4, 8, 10.1088/1748-6041/4/6/065011
Hadzima, 2003, Cathodic anticorrosive protection of magnesium alloy AZ91, Metallic Mater, 41, 174
Hiromoto, 2008, Polarization behavior of pure magnesium under a controlled flow in a NaCl solution, Mater Trans, 49, 1456, 10.2320/matertrans.MRA2008011
Hiromoto, 2008, Influence of pH and flow on the polarisation behaviour of pure magnesium in borate buffer solutions, Corros Sci, 50, 3561, 10.1016/j.corsci.2008.09.026
Huang, 2009, Bio-corrosion study on zirconium-based bulk-metallic glasses, Intermetallics, 17, 195, 10.1016/j.intermet.2008.07.020
Kannan, 2008, In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid, Biomaterials, 29, 2306, 10.1016/j.biomaterials.2008.02.003
Kannan, 2008, Evaluating the stress corrosion cracking susceptibility of Mg–Al–Zn alloy in modified-simulated body fluid for orthopaedic implant application, Scr Mater, 59, 175, 10.1016/j.scriptamat.2008.03.001
Liu, 2006, Corrosion behavior of Zr-based bulk metallic glasses in different artificial body fluids, J Alloy Compd, 425, 268, 10.1016/j.jallcom.2006.01.048
Mueller, 2009, Degradation of magnesium and its alloys: dependence on the composition of the synthetic biological media, J Biomed Mater Res, Part A, 90A, 487, 10.1002/jbm.a.32106
Mueller, 2010, Critical discussion of the results from different corrosion studies of Mg and Mg alloys for biomaterial applications, Acta Biomater, 6, 1749, 10.1016/j.actbio.2009.12.048
Mueller, 2007, Magnesium and its alloys as degradable biomaterials: corrosion studies using potentiodynamic and EIS electrochemical techniques, Mater Res, 10, 5, 10.1590/S1516-14392007000100003
Ng, 2010, Stearic acid coating on magnesium for enhancing corrosion resistance in Hanks’ solution, Surf Coat Technol, 204, 1823, 10.1016/j.surfcoat.2009.11.024
Omanovic, 1999, Electrochemical studies of the adsorption behavior of bovine serum albumin on stainless steel, Langmuir, 15, 8315, 10.1021/la990474f
Peng, 2010, Preparation and properties of high purity Mg-Y biomaterials, Biomaterials, 31, 398, 10.1016/j.biomaterials.2009.09.065
Rettig, 2008, Time-dependent electrochemical characterization of the corrosion of a magnesium rare-earth alloy in simulated body fluids, J Biomed Mater Res, Part A, 85A, 167, 10.1002/jbm.a.31550
Song, 2008, Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application, Mater Lett, 62, 3276, 10.1016/j.matlet.2008.02.048
Südholz, 2009, Corrosion behaviour of Mg-alloy AZ91E with atypical alloying additions, J Alloy Compd, 471, 109, 10.1016/j.jallcom.2008.03.128
Wan, 2008, Preparation and characterization of a new biomedical magnesium–calcium alloy, Mater Des, 29, 2034, 10.1016/j.matdes.2008.04.017
Wan, 2008, Influence of zinc ion implantation on surface nanomechanical performance and corrosion resistance of biomedical magnesium–calcium alloys, Appl Surf Sci, 254, 5514, 10.1016/j.apsusc.2008.02.117
Wang, 2010, In vitro degradation and mechanical integrity of Mg–Zn–Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process, Acta Biomater, 6, 1743, 10.1016/j.actbio.2009.12.009
Xin, 2009, Corrosion behavior of ZrN/Zr coated biomedical AZ91 magnesium alloy, Surf Coat Technol, 203, 2554, 10.1016/j.surfcoat.2009.02.074
Xin, 2008, Electrochemical behavior Al2O3/Al coated surgical AZ91 magnesium alloy in simulated body fluids, J Electrochem Soc, 155, 178, 10.1149/1.2844433
Xu, 2009, Phosphating treatment and corrosion properties of Mg–Mn–Zn alloy for biomedical application, J Mater Sci: Mater Med, 20, 859
Yamamoto, 2001, Improvement of corrosion resistance of magnesium alloys by vapor deposition, Scr Mater, 44, 1039, 10.1016/S1359-6462(01)00662-5
Zeng, 2007, Electrochemical behavior of magnesium alloys in simulated body fluids, Trans Nonferrous Met Soc Chin, 17, S166
Zhang, 2005, Formation by ion plating of Ti-coating on pure Mg for biomedical applications, Scr Mater, 53, 523, 10.1016/j.scriptamat.2005.05.009
Zhang, 2008, Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application, Mater Sci Eng A, 497, 111, 10.1016/j.msea.2008.06.019
Zhang, 2009, Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application, Mater Sci Eng C, 29, 987, 10.1016/j.msec.2008.08.024
Zhang, 2009, In vitro degradation, hemolysis and MC3T3–E1 cell adhesion of biodegradable Mg–Zn alloy, Mater Sci Eng C, 29, 1907, 10.1016/j.msec.2009.03.001
Zheng, 2010, In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy, Acta Biomater, 6, 1783, 10.1016/j.actbio.2009.10.009
Zhu, 2005, Improved corrosion resistance of AZ91D magnesium alloy by an aluminium-alloyed coating, Surf Coat Technol, 200, 2834, 10.1016/j.surfcoat.2004.11.042
Uhlig, 1963
Birbilis, 2009, On the corrosion of binary magnesium-rare earth alloys, Corros Sci, 51, 683, 10.1016/j.corsci.2008.12.012
Kirkland, 2011, Performance-driven design of biocompatible Mg-alloys, JOM, 63, 28, 10.1007/s11837-011-0089-z
Kirkland, 2010, In-vitro dissolution of magnesium–calcium binary alloys: clarifying the unique role of calcium additions in bioresorbable magnesium implant alloys, J Biomed Mater Res B Appl Biomater, 95B, 91, 10.1002/jbm.b.31687
Gosser, 1993
International, 2004
Tait, 1994
Wang, 2002
Zhang, 2009, Effects of scan rate on the potentiodynamic polarization curve obtained to determine the Tafel slopes and corrosion current density, Corros Sci, 51, 581, 10.1016/j.corsci.2008.12.005
Macdonald, 2005
Ghali, 2010
Bernabeu, 1988, Study of the adsorption of albumin on a platinum rotating disk electrode using impedance measurements, Electrochim Acta, 33, 1129, 10.1016/0013-4686(88)80204-4
Birbilis, 2005, Limitations in microelectrochemical capillary cell testing and transformation of electrochemical transients for acquisition of microcell impedance data, Electrochim Acta, 50, 3536, 10.1016/j.electacta.2005.01.010
Contu, 2003, Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. II. Coarsely sandblasted samples, J Biomed Mater Res Part A, 67A, 246, 10.1002/jbm.a.10113
Gunde, 2010, The influence of heat treatment and plastic deformation on the bio-degradation of a Mg–Y–RE alloy, J Biomed Mater Res Part A, 92A, 409, 10.1002/jbm.a.32350
Jackson, 2000, Electrochemical studies of the adsorption behavior of serum proteins on titanium, Langmuir, 16, 5449, 10.1021/la991497x
Kuwahara, 2001, Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank’s solution, Mater Trans, 42, 1317, 10.2320/matertrans.42.1317
Mareci, 2007, EIS diagnosis of some dental alloys in artificial saliva, Environ Eng Manage J, 6, 313, 10.30638/eemj.2007.034
Menini, 2006, Surface and corrosion electrochemical characterization of titanium foams for implant applications, J Electrochem Soc, 153, B13, 10.1149/1.2128098
Quach, 2008, Corrosion behaviour of an Mg–Y–RE alloy used in biomedical applications studied by electrochemical techniques, C. R. Chim, 11, 1043, 10.1016/j.crci.2008.06.007
Shi, 2009, Improvement of corrosion resistance of pure magnesium in Hank’s Solution by microarc oxidation with sol–gel TiO2 sealing, J Alloy Compd, 469, 286, 10.1016/j.jallcom.2008.01.102
Song, 2009, Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid, Mater Sci Eng C, 29, 1039, 10.1016/j.msec.2008.08.026
Wang, 2010, Scratch-resistant anticorrosion sol–gel coating for the protection of AZ31 magnesium alloy via a low temperature sol–gel route, Corros Sci, 52, 255, 10.1016/j.corsci.2010.04.002
MacDonald, 1987, Impedance measurement techniques, 133
Lasia, 1999, Electrochemical impedance spectroscopy and its applications, 143
Stern, 1957, Electrochemical polarization: a theoretical analysis of the shape of polarization curves, J Electrochem Soc, 104, 56, 10.1149/1.2428496