Assessing roles of geochemical reactions on CO2 plume, injectivity and residual trapping

Azizi, 2013, Approximate analytical solutions for CO2 injectivity into saline formations, SPE Reservoir Eval. Eng., 16, 123, 10.2118/165575-PA Bacci, 2011, An experimental and numerical investigation into the impact of dissolution/precipitation mechanisms on CO2 injectivity in the wellbore and far field regions, International Journal of Greenhouse Gas Control, 5, 579, 10.1016/j.ijggc.2010.05.007 Cui, 2018, Assessing the combined influence of fluid-rock interactions on reservoir properties and injectivity during CO2 storage in saline aquifers, Energy, 155, 281, 10.1016/j.energy.2018.05.024 Holzheid, 2016, Dissolution kinetics of selected natural minerals relevant to potential CO2-injection sites – Part 2: dissolution and alteration of carbonates and feldspars in CO2-bearing brines, Geochemistry, 76, 643, 10.1016/j.chemer.2016.09.008 Krevor, 2015, Capillary trapping for geologic carbon dioxide storage – from pore scale physics to field scale implications, International Journal of Greenhouse Gas Control, 40, 221, 10.1016/j.ijggc.2015.04.006 Mahzari, 2019, An improved understanding about CO2 EOR and CO2 storage in liquid-rich shale reservoirs, 1 Mantilla, 2009, Inexpensive assessment of plume migration during CO2 sequestration, 1 McMillan, 2008, Time-dependent injectivity during CO2 storage in aquifers, 1 Nghiem, 2009, Optimization of residual gas and solubility trapping for CO2 sequestration in saline aquifers, 1 Nghiem, 2004, Modeling CO2 storage in aquifers with a fully-coupled geochemical EOS compositional simulator, 1 Ni, 2019, Predicting CO2 residual trapping ability based on experimental petrophysical properties for different sandstone types, International Journal of Greenhouse Gas Control, 86, 158, 10.1016/j.ijggc.2019.04.024 Tran, 2009, Geomechanical risk mitigation for CO2 sequestration in saline aquifers, 1 Tran, 2017, CO2 plume characterization using pressure arrival time, 1