Assessing artificial neural network performance for predicting interlayer conditions and layer modulus of multi-layered flexible pavement

Chen Y, Lopp G, Roque R. Effects of an asphalt rubber membrane interlayer on pavement reflective cracking performance. Journal of Materials in Civil Engineering, 2013, 25(12): 1936–1940

Blankenship P, Iker N, Drbohlav J. Interlayer and design considerations to retard reflective cracking. Transportation Research Record: Journal of the Transportation Research Board, 2004, 1896(1): 177–186

Lv S, Fan X, Xia C, Zheng J, Chen D, You L. Characteristics of moduli decay for the asphalt mixture under different loading conditions. Applied Sciences (Basel, Switzerland), 2018, 8(5): 840

Mehta Y, Roque R. Evaluation of FWD data for determination of layer moduli of pavements. Journal of Materials in Civil Engineering, 2003, 15(1): 25–31

Nazzal M, Abu-Farsakh M, Alshibli K, Mohammad L. Evaluating the light falling weight deflectometer device for in situ measurement of elastic modulus of pavement layers. Transportation Research Record: Journal of the Transportation Research Board, 2016, 1: 13–22

Liu K, Zhang X, Guo D, Wang F, Xie H. The interlaminar shear failure characteristics of asphalt pavement coupled heating cables. Materials and Structures, 2018, 51(3): 67

Liu K, Li Y, Wang F, Xie H, Pang H, Bai H. Analytical and model studies on behavior of rigid polyurethane composite aggregate under compression. Journal of Materials in Civil Engineering, 2019, 31(3): 04019007

Kim H, Arraigada M, Raab C, Partl M N. Numerical and experimental analysis for the interlayer behavior of double-layered asphalt pavement specimens. Journal of Materials in Civil Engineering, 2011, 23(1): 12–20

You L, Yan K, Hu Y, Zollinger D G. Spectral element solution for transversely isotropic elastic multi-layered structures subjected to axisymmetric loading. Computers and Geotechnics, 2016, 1: 67–73

Fardad K, Najafi B, Ardabili S F, Mosavi A, Shamshirband S, Rabczuk T. Biodegradation of medicinal plants waste in an anaerobic digestion reactor for biogas production. Computers Materials and Continua. 2018, 55(3): 318–392

Ai Z Y, Cheng Y C, Zeng W Z. Analytical layer-element solution to axisymmetric consolidation of multilayered soils. Computers and Geotechnics, 2011, 38(2): 227–232

Uzan J, Livneh M, Eshed Y. Investigation of adhesion properties between asphaltic-concrete layers. Association of Asphalt Paving Technologists Proc, 1978, 1: 495–521

Kruntcheva M R, Collop A C, Thom N H. Properties of asphalt concrete layer interfaces. Journal of Materials in Civil Engineering, 2006, 18(3): 467–471

You L, Yan K, Hu Y, Ma W. Impact of interlayer on the anisotropic multi-layered medium overlaying viscoelastic layer under axisymmetric loading. Applied Mathematical Modelling, 2018, 1: 726–743

You L, Yan K, Liu N, Shi T, Lv S. Assessing the mechanical responses for anisotropic multi-layered medium under harmonic moving load by Spectral Element Method (SEM). Applied Mathematical Modelling, 2019, 1: 22–37

Yoo P, Al-Qadi I L, Elseifi M, Janajreh I. Flexible pavement responses to different loading amplitudes considering layer interface condition and lateral shear forces. International Journal of Pavement Engineering, 2006, 7(1): 73–86

Kruntcheva M R, Collop A C, Thom N H. Effect of bond condition on flexible pavement performance. Journal of Transportation Engineering, 2005, 131(11): 880–888

You L, You Z, Dai Q, Xie X, Washko S, Gao J. Investigation of adhesion and interface bond strength for pavements underlying chip-seal: Effect of asphalt-aggregate combinations and freeze-thaw cycles on chip-seal. Construction & Building Materials, 2019, 1: 322–330

Peng Y, He Y. Structural characteristics of cement-stabilized soil bases with 3D finite element method. Frontiers of Architecture and Civil Engineering in China, 2009, 3(4): 428

You L, You Z, Dai Q, Guo S, Wang J, Schultz M. Characteristics of water-foamed asphalt mixture under multiple freeze-thaw cycles: Laboratory evaluation. Journal of Materials in Civil Engineering, 2018, 30(11): 04018270

Ktari R, Millien A, Fouchal F, Pop I O, Petit C. Pavement interface damage behavior in tension monotonic loading. Construction & Building Materials, 2016, 1: 430–442

Zak J, Monismith C L, Coleri E, Harvey J T. Uniaxial shear tester—New test method to determine shear properties of asphalt mixtures. Road Materials and Pavement Design, 2017, 18(sup1): 87–103

Lv S, Wang S, Liu C, Zheng J, Li Y, Peng X. Synchronous testing method for tension and compression moduli of asphalt mixture under dynamic and static loading states. Journal of Materials in Civil Engineering, 2018, 30(10): 04018268

Canestrari F, Santagata E. Temperature effects on the shear behaviour of tack coat emulsions used in flexible pavements. International Journal of Pavement Engineering, 2005, 6(1): 39–46

Sholar G A, Page G C, Musselman J A, Upshaw P B, Moseley H L. Preliminary investigation of a test method to evaluate bond strength of bituminous tack coats (with discussion). Electronic Journal of the Association of Asphalt Paving Technologists, 2004, 1: 771–806

Raab C, Partl M N. Interlayer shear performance: Experience with different pavement structures. In: Proceedings of the 3rd Eurasphalt and Eurobitume Congress Held Vienna. Vienna: Foundation Eurasphalt, 2004

Mohammad L, Raqib M, Huang B. Influence of asphalt tack coat materials on interface shear strength. Transportation Research Record: Journal of the Transportation Research Board, 1789, 2002: 56–65

West RC, Zhang J, Moore J. Evaluation of Bond Strength between Pavement Layers. NCAT Report 2005:05-8. 2005

Wheat M. Evalutation Of Bond Strength at Asphalt Interfaces. Kansas: Kansas State University, 2007

Baek J, Al-Qadi I, Xie W, Buttlar W. In situ assessment of interlayer systems to abate reflective cracking in hot-mix asphalt overlays. Transportation Research Record: Journal of the Transportation Research Board, 2008, 2084(1): 104–113

Ozer H, Al-Qadi I L, Wang H, Leng Z. Characterisation of interface bonding between hot-mix asphalt overlay and concrete pavements: modelling and in-situ response to accelerated loading. International Journal of Pavement Engineering, 2012, 13(2): 181–196

You L, You Z, Yan K. Effect of anisotropic characteristics on the mechanical behavior of asphalt concrete overlay. Frontiers of Structural and Civil Engineering, 2019, 13(1): 110–122

Goel A, Das A. Nondestructive testing of asphalt pavements for structural condition evaluation: A state of the art. Nondestructive Testing and Evaluation, 2008, 23(2): 121–140

Xue W, Wang L, Wang D, Druta C. Pavement health monitoring system based on an embedded sensing network. Journal of Materials in Civil Engineering, 2014, 26(10): 04014072

Garbowski T, Pożarycki A. Multi-level backcalculation algorithm for robust determination of pavement layers parameters. Inverse Problems in Science and Engineering, 2017, 25(5): 674–693

Levenberg E. Backcalculation with an implanted inertial sensor. Transportation Research Record: Journal of the Transportation Research Board, 2015, 2525(1): 3–12

Liu P, Wang D, Otto F, Oeser M. Application of semi-analytical finite element method to analyze the bearing capacity of asphalt pavements under moving loads. Frontiers of Structural and Civil Engineering, 2018, 12(2): 215–221

Fwa T, Chandrasegaran S. Regression model for back-calculation of rigid-pavement properties. Journal of Transportation Engineering, 2001, 127(4): 353–355

Al Hakim B, Cheung L W, Armitage R J. Use of FWD data for prediction of bonding between pavement layers. International Journal of Pavement Engineering, 1999, 1(1): 49–59

You L, Yan K, Hu Y, Liu J, Ge D. Spectral element method for dynamic response of transversely isotropic asphalt pavement under impact load. Road Materials and Pavement Design, 2018, 19(1): 223–238

Sharma S, Das A. Backcalculation of pavement layer moduli from failing weight deflectometer data using an artificial neural network. Canadian Journal of Civil Engineering, 2008, 35(1): 57–66

Bilodeau J P, Dore G. Estimation of tensile strains at the bottom of asphalt concrete layers under wheel loading using deflection basins from falling weight deflectometer tests. Canadian Journal of Civil Engineering, 2012, 39(7): 771–778

Bilodeau J P, Dore G. Direct estimation of vertical strain at the top of the subgrade soil from interpretation of falling weight deflectometer deflection basins. Canadian Journal of Civil Engineering, 2014, 41(5): 403–408

Grenier S, Konrad J M. Dynamic interpretation of failing weight deflectometer tests on flexible pavements using the spectral element method: Backcalculation. Canadian Journal of Civil Engineering, 2009, 36(6): 957–968

Grenier S, Konrad J M, LeBœuf D. Dynamic simulation of falling weight deflectometer tests on flexible pavements using the spectral element method: Forward calculations. Canadian Journal of Civil Engineering, 2009, 36(6): 944–956

Shafabakhsh G H, Ani O J, Talebsafa M. Artificial neural network modeling (ANN) for predicting rutting performance of nanomodified hot-mix asphalt mixtures containing steel slag aggregates. Construction & Building Materials, 2015, 1: 136–143

Far M S S, Underwood B S, Ranjithan S R, Kim Y R, Jackson N. Application of artificial neural networks for estimating dynamic modulus of asphalt concrete. Transportation Research Record: Journal of the Transportation Research Board, 2009, 2127(1): 173–186

Lacroix A, Kim Y, Ranjithan S. Backcalculation of dynamic modulus from resilient modulus of asphalt concrete with an artificial neural network. Transportation Research Record: Journal of the Transportation Research Board, 2008, (2057): 107–113

Ismail A. ANN-based empirical modelling of pile behaviour under static compressive loading. Frontiers of Structural and Civil Engineering, 2017, 12(4): 1–15

Anitescu C, Atroshchenko E, Alajlan N, Rabczuk T. Artificial neural network methods for the solution of second order boundary value problems. Computers, Materials & Continua., 2019, 59(1): 345–359

Tarefder R, White L, Zaman M. Development and application of a rut prediction model for flexible pavement. Transportation Research Record: Journal of the Transportation Research Board, 1936, 2005: 201–209

Kim S H, Yang J D, Jeong J H. Prediction of subgrade resilient modulus using artificial neural network. KSCE Journal of Civil Engineering, 2014, 18(5): 1372–1379

Nazzal M D, Tatari O. Evaluating the use of neural networks and genetic algorithms for prediction of subgrade resilient modulus. International Journal of Pavement Engineering, 2013, 14(4): 364–373

Park H I, Kweon G C, Lee S R. Prediction of resilient modulus of granular subgrade soils and subbase materials using artificial neural network. Road Materials and Pavement Design, 2009, 10(3): 647–665

Grenier S, Konrad J M, LeBœuf D. Dynamic simulation of falling weight deflectometer tests on flexible pavements using the spectral element method: forward calculations. Canadian Journal of Civil Engineering, 2009, 36(6): 944–956

Hadidi R, Gucunski N. Comparative study of static and dynamic falling weight deflectometer back-calculations using probabilistic approach. Journal of Transportation Engineering, 2010, 136(3): 196–204

Duan Z H, Kou S C, Poon C S. Using artificial neural networks for predicting the elastic modulus of recycled aggregate concrete. Construction & Building Materials, 2013, 1: 524–532

Baughman D R, Liu Y A. Neural Networks in Bioprocessing and Chemical Engineering. San Diego, California: Academic press, 2014

Shafabakhsh G, Ani O J, Talebsafa M. Artificial neural network modeling (ANN) for predicting rutting performance of nanomodified hot-mix asphalt mixtures containing steel slag aggregates. Construction & Building Materials, 2015, 1: 136–143

Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 1: 19–31

Chaudhari YA, Katti G. Finite Element Analysis of Effect of Punching Shear in Flat Slab Using Ansys 16.0. 2016

Shankar S, Nithyaprakash R. Effect of radial clearance on wear and contact pressure of hard-on-hard hip prostheses using finite element concepts. Tribology Transactions, 2014, 57(5): 814–820

Simões G J, Almeida C A, dos Reis N R S. Numerical simulations of damage and repair of thin wall pipes resulting from lateral denting. In: 2004 International ANSYS Conference. Pittsburgh, 2004

Wang H, Al-Qadi I. Combined effect of moving wheel loading and three-dimensional contact stresses on perpetual pavement responses. Transportation Research Record: Journal of the Transportation Research Board, 2009, 2095(1): 53–61

Schubert S, Gsell D, Steiger R, Feltrin G. Influence of asphalt pavement on damping ratio and resonance frequencies of timber bridges. Engineering Structures, 2010, 32(10): 3122–3129

Liu N, Yan K, Shi C, You L. Influence of interface conditions on the response of transversely isotropic multi-layered medium by impact load. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 1: 485–493

Hsu K, Gupta H V, Sorooshian S. Artificial neural network modeling of the rainfall-runoff process. Water Resources Research, 1995, 31(10): 2517–2530

Hamdia K M, Lahmer T, Nguyen-Thoi T, Rabczuk T. Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS. Computational Materials Science, 2015, 1: 304–313

Saltan M, Terzi S. Comparative analysis of using artificial neural networks (ANN) and gene expression programming (GEP) in backcalculation of pavement layer thickness. Indian Journal of Engineering and Materials Sciences, 2005, 12(1): 42–50

Yan K, You L. Investigation of complex modulus of asphalt mastic by artificial neural networks. Indian Journal of Engineering and Materials Sciences, 2014, 1: 445–450

Karaboga D, Akay B, Ozturk C. Artificial bee colony (ABC) optimization algorithm for training feed-forward neural networks. In: International Conference on Modeling Decisions for Artificial Intelligence. Springer, 2007, 318–329

Badawy M F, Msekh M A, Hamdia K M, Steiner M K, Lahmer T, Rabczuk T. Hybrid nonlinear surrogate models for fracture behavior of polymeric nanocomposites. Probabilistic Engineering Mechanics, 2017, 1: 64–75

Sharma B, K. Venugopalan P. Comparison of Neural Network Training Functions for Hematoma Classification in Brain CT Images. IOSR Journal of Computer Engineering, 2014, 16(1): 31–35

Beale M H, Hagan M T, Demuth H B. Neural Network Toolbox User’s Guide. Natick, MA: The MathWorks. Inc., 2010

Priyadarshini R, Dash N, Swarnkar T, Misra R. Functional analysis of artificial neural network for dataset classification. Special Issue of IJCCT, 2010, 1(2): 49–54

Liu J, Yan K, You L, Liu P, Yan K. Prediction models of mixtures’ dynamic modulus using gene expression programming. International Journal of Pavement Engineering, 2016, 18(11): 1–10

Pellinen T K. Investigation of the use of dynamic modulus as an indicator of hot-mix asphalt performance. Dissertation for the Doctoral Degree. Arizona: Arizona State University, 2001

Bush A J, Baladi G Y. Nondestructive Testing of Pavements and Backcalculation of Moduli. Conshohocken, Pennsylvania: ASTM International, 1989