Artificial neural network–based and response surface methodology–based predictive models for material removal rate and surface roughness during electro-discharge diamond grinding of Inconel 718

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture - Tập 230 Số 11 - Trang 2082-2091 - 2016
Deepak Rajendra Unune1, Harlal Singh Mali1
1Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, India

Tóm tắt

Hybrid machining processes growing popularity in the processing of difficult-to-cut materials due to their distinct merits over individual machining processes attributed by an amalgamation of two or more machining mechanisms simultaneously. This research study deals with the response surface methodology and artificial neural network with backpropagation algorithm–based mathematical modeling of electro-discharge diamond grinding of Inconel 718 superalloy. The matrix experiments were designed based on central composite design. The wheel speed, current, pulse-on-time, and duty factor were chosen as control factors, while material removal rate and average surface roughness ( Ra) were chosen as performance parameters. The analysis of variance test shows that the wheel speed is the major factor influencing both the material removal rate and the Ra and contributes 89.03% and 79.10% on material removal rate and Ra, respectively, followed by current which contributes 4.43% and 8.38% on material removal rate and Ra, respectively. The modeling and predictive abilities of developed artificial neural network model (4-24-2) were related to the response surface methodology model using root mean square error and absolute standard deviation. The predicted values of material removal rate and Ra by response surface methodology and artificial neural network are in close agreement with the actual experimental results.

Từ khóa


Tài liệu tham khảo

10.1007/s00170-012-4386-7

10.1177/095440541454614

10.1016/j.proeng.2011.11.107

10.1016/j.procir.2013.03.002

10.1016/0890-6955(95)00103-4

10.1016/S0924-0136(97)00130-1

10.1007/s12541-010-0059-3

10.1080/10426910903536758

Kozak J., 2002, Arch Civil Mech Eng, 2, 83

10.1007/s00170-006-0820-z

Singh GK, 2012, Int J Mach Mach Mater, 11, 429

10.1016/j.jmatprotec.2007.03.032

10.1080/10426914.2014.892985

10.1177/0954405413489294

Shrivastava PK, 2012, Mater Manuf Process, 28, 1036

10.1504/IJAT.2013.057329

10.1080/10426914.2010.489790

10.1243/09544054JEM1343

10.1080/07373930902988247

Thông tin
Thông tin xuất bản

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Tập 230 Số 11

2082-2091

Thông tin tác giả