Arc-to-sheet printer for high-precision patterning with positional errors below 6 ppm at 3σ level: Trochoidal trajectory mechanism for rotary motion of arc

Kina, 2010, Organic thin-film transistors fabricated by microcontact printing, Jpn J Appl Phys, 49, 10.1143/JJAP.49.01AB07 Kang, 2012, High‐performance printed transistors realized using femtoliter gravure‐printed sub‐10 μm metallic nanoparticle patterns and highly uniform polymer dielectric and semiconductor layers, Adv Mater, 24, 3065, 10.1002/adma.201200924 Takeda, 2013, Integrated circuits using fully solution-processed organic TFT devices with printed silver electrodes, Org Electron, 14, 3362, 10.1016/j.orgel.2013.10.006 Fukuda, 2014, Fully solution-processed flexible organic thin film transistor arrays with high mobility and exceptional uniformity, Sci Rep, 4, 10.1038/srep03947 Matsui, 2019, Flexible and printed organic transistors: from materials to integrated circuits, Org Electron, 75, 10.1016/j.orgel.2019.105432 Sun, 2020, Fully r2r‐printed carbon‐nanotube‐based limitless length of flexible active‐matrix for electrophoretic display application, Adv Electron Mater, 6, 10.1002/aelm.201901431 Chung, 2019, Recent progress in inkjet‐printed thin‐film transistors, Adv Sci, 6 Rehman, 2016, Resistive switching in all-printed, flexible and hybrid MoS2-PVA nanocomposite based memristive device fabricated by reverse offset, Sci Rep, 6, 1, 10.1038/srep36195 Ali, 2021, Memristor fabrication through printing technologies: a review, IEEE Access, 9, 95970, 10.1109/ACCESS.2021.3094027 Strutwolf, 2021, Memristive devices based on mass printed organic resistive switching layers, Appl Phys, 127, 709, 10.1007/s00339-021-04851-9 Kim, 2015, Roll-offset printed transparent conducting electrode for organic solar cells, Thin Solid Films, 580, 21, 10.1016/j.tsf.2015.02.075 Choi, 2014, Fabrication of a single-layer metal-mesh touchscreen sensor using reverse-offset printing, J Inf Disp, 16, 37, 10.1080/15980316.2014.991770 Li, 2018, Printable transparent conductive films for flexible electronics, Adv Mater, 30 Park, 2019, High-resolution and large-area patterning of highly conductive silver nanowire electrodes by reverse offset printing and intense pulsed light irradiation, ACS Appl Mater Interfaces, 11, 14882, 10.1021/acsami.9b00838 Kamijo, 2021, Printed copper grid transparent conducting electrodes for organic light-emitting diodes, Acs Appl Electron Mater Kim, 2022, Simple, fast, and scalable reverse-offset printing of micropatterned copper nanowire electrodes with sub-10 μm resolution, ACS Appl Mater Interfaces, 14, 5807, 10.1021/acsami.1c21223 Sreenilayam, 2019, Advanced materials of printed wearables for physiological parameter monitoring, Mater Today, 32, 147, 10.1016/j.mattod.2019.08.005 Cheng, 2020, A review of flexible force sensors for human health monitoring, J Adv Res, 26, 53, 10.1016/j.jare.2020.07.001 Khan, 2015, Technologies for printing sensors and electronics over large flexible substrates: a review, Sensors Journal, 15, 3164, 10.1109/JSEN.2014.2375203 Kusaka, 2020, Recent advances in reverse offset printing: an emerging process for high-resolution printed electronics, Jpn J Appl Phys, 59, SG0802, 10.7567/1347-4065/ab6462 Kusaka, 2015, Microcontact patterning of conductive silver lines by contact inking and its layer-transfer mechanisms, J Micromech Microeng, 25, 10.1088/0960-1317/25/5/055022 Michel, 2001, Printing meets lithography: soft approaches to high-resolution patterning, IBM J Res Dev, 45, 697, 10.1147/rd.455.0697 Hsu, 2005, Soft lithography contacts to organics, Mater Today, 8, 42, 10.1016/S1369-7021(05)70986-X Kwon, 2021, Overview of recent progress in electrohydrodynamic jet printing in practical printed electronics: focus on the variety of printable materials for each component, Mater Adv, 2, 5593, 10.1039/D1MA00463H Mkhize, 2022, Electrohydrodynamic jet printing: introductory concepts and considerations, Small Sci, 2, 10.1002/smsc.202100073 Subramanian, 2015, High-speed printing of transistors: from inks to devices, Proceedings of the IEEE, 103, 567, 10.1109/JPROC.2015.2408321 Kang, 2020, Distortion mechanism of patterning positions in the soft roller printing process for realizing large-area overlay printing, J Micromech Microeng, 30, 10.1088/1361-6439/ab7323 Noh, 2015, Key issues with printed flexible thin film transistors and their application in disposable RF sensors, P Ieee, 103, 554, 10.1109/JPROC.2015.2410303 Zhou, 2018, Multilayer noninteracting dielectric metasurfaces for multiwavelength metaoptics, Nano Lett, 18, 7529, 10.1021/acs.nanolett.8b03017 Lee, 2017, Enhancement of printing overlay accuracy by reducing the effects of mark deformations, Microelectron Eng, 180, 8, 10.1016/j.mee.2017.05.046 Kim, 2011, Register control of roll-to-roll gravure-offset printing equipment considering time difference between measurement and actuation, Proc Institution Mech Eng Part C J Mech Eng Sci, 226, 2726, 10.1177/0954406211433247 Kang, 2014, Investigation on synchronization of the offset printing process for fine patterning and precision overlay, J Appl Phys, 115, 10.1063/1.4882020 Kim, 2016, Development of a precision reverse offset printing system, Rev Sci Instrum, 87, 10.1063/1.4939237 Kusaka, 2020, Decomposition of pattern distortions by the Spread polynomial model in roll-to-sheet reverse offset printing, J Micromech Microeng, 30, 10.1088/1361-6439/ab999c Noh, 2013, A study on the enhancement of printing location accuracy in a roll-to-roll gravure offset printing system, Int J Adv Manuf Technol, 68, 1147, 10.1007/s00170-013-4907-z Kang, 2022, Actively compensated precision overlay in a reverse-offset printing system for realizing printed electronics of a large-area and multi-layer structure, Flexible Print Electron, 7 Haitjema, 1993, Evaluation of surface plate flatness measurements, Eur J Mech Eng, 38, 165 Kusaka, 2015, High-resolution patterning of silver conductive lines by adhesion contrast planography, J Micromech Microeng, 25, 10.1088/0960-1317/25/9/095002 Kusaka, 2019, Mechanisms of adhesive micropatterning of functional colloid thin layers, ACS Appl Mater Interfaces, 11, 40602, 10.1021/acsami.9b13467 Chang, 2015, Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system, Rev Sci Instrum, 86, 10.1063/1.4921495