Applications of a discrete viscous adjoint method for aerodynamic shape optimisation of 3D configurations

CEAS Aeronautical Journal - Tập 3 Số 1 - Trang 25-34 - 2012
Joël Brézillon1, Richard P. Dwight1
1German Aerospace Center (DLR), Institute of Aerodynamics and Flow Technology, Lilienthalplatz 7, 38108, Braunschweig, Germany

Tóm tắt

Từ khóa


Tài liệu tham khảo

Jameson, A.: Aerodynamic design via control theory. J. Sci. Comput. 3(3), 233–260 (1988)

Jameson, A.: Optimum aerodynamic design using CFD and control theory. In: Proceedings of the AIAA 12th Computational Fluid Dynamics Conference, AIAA 12th , AIAA 95-1729, San Diego (1995)

Anderson, W.K., Venkatakrishnan, V.: Aerodynamic design optimization on unstructured grids with a continuous formulation. In: Proceeding of the 35th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 97-0643, Reno (1997)

Giles, M., Pierce, N.: An introduction to the adjoint approach to design. J Flow Turbul Combust 65, 393–415 (2000)

Jameson, A., Pierce, N., Martinelli, L.: Optimum aerodynamic design using the Navier–Stokes equations. In: Proceedings of the AIAA 35th Aerospace Sciences Meeting and Exhibit, AIAA 97-0101, Reno (1997)

Elliot, J., Peraire, J.: Aerodynamic optimization unstructured meshes with viscous effects. In: Proceedings of the 13th AIAA CFD Conference, AIAA 97-1849, Snowmass, CO (1997)

Jameson, A., Vassberg, J.C.: Computational fluid dynamics for aerodynamic design: its current and future impact. In: Proceedings of the 39th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2001-0538, Reno (2001)

Meaux, M., Cormery, M.: Viscous aerodynamic shape optimization based on the discrete adjoint state for 3d industrial configurations. In: Proceedings of the ECCOMAS 2004, Jyvaskyla, Finland (2004)

Vassberg, J.C., Jameson, A.: Aerodynamic Shape Optimization Part II: Sample Applications. Von Karman Institute, Brussels (2006)

Nielsen E.J., Park M.A.: Using an adjoint approach to eliminate mesh sensitivities in computational design. In: Proceedings of the 43rd AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2005-0491, Reno (2005)

Mavriplis, D.J.: A discrete adjoint-based approach for optimization problems on three-dimensional unstructured meshes. In: Proceedings of the 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-0050, Reno (2006).

Mouton, S., Lauranceau, J., Carrier, G.: Aerodynamic and structural optimization of power-plant integration under a wing of a transport aircraft. In: Proceedings of the 42ème Colloque d’Aérodynamique Appliquée AAAF, Sophia-Antipolis, France (2007)

Galle, M.: Ein Verfahren zur numerischen Simulation kompressibler, reibungsbehafteter Strömungen auf hybriden Netzen. DLR-FB 99-04 (1999)

Gerhold, T.H.: Overview of the hybrid RANS TAU-Code In: Kroll, N., Fassbender, J. (eds) MEGAFLOW Numerical Flow Simulation Tool for Transport Aircraft Design, Notes on Multidisciplinary Design, vol. 89. Springer, Berlin (2005)

Schwamborn, D., Gerhold, T., Heinrich, R.: The DLR TAU-Code: recent applications in research and industry. In: Proceedings of ECCOMAS CFD 2006, Delft, The Netherlands (2006)

Dwight, R.: Efficiency improvements of RANS-Based analysis and optimization using implicit and adjoint methods on unstructured grids. School of Mathematics, University of Manchester (2006)

Dwight, R., Brezillon, J.: Effect of various approximations of the discrete adjoint on gradient-based optimization. AIAA J 44(12), 3022–3031 (2006). doi: 10.2514/1.21744

Dwight, R., Brezillon, J., Vollmer, D.B.: Efficient algorithms for solution of the adjoint compressible Navier–Stokes equations with applications. In: Proceedings of the ONERA-DLR Aerospace Symposium (ODAS), Toulouse (2006)

Schroff, G., Keller, H.: Stabilization of unstable procedures: the recursive projection method. SIAM J Numer Anal 30(4), 1099–1120 (1993)

Saad, Y., Schultz, M.H.: A generalized minimum residual algorithm for solving non-symmetric linear systems. SIAM J Sci Comput 7(3), 856–869 (1988)

Dwight, R.P., Brezillon, J.: Efficient and robust algorithms for solution of the adjoint compressible navier-stokes equations with applications. Int J Numer Met Fluids 60(4), 365–389 (2008)

Widhalm, M., Brezillon, J., Ilic, C., Leicht, T.: Investigation on adjoint based gradient computations for realistic 3D aero-optimization. In: Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Fort Worth, TX (2010)

Reuther, J., Jameson, A., Farmer, J., Martinelli, L., Saunders, D.: Aerodynamic shape optimization of complex aircraft configurations via an adjoint formulation, Proceedings of the 34th Aerospace Sciences Meeting and Exhibit, AIAA 96–0094. Reno, NV (1996)

Brezillon, J., Brodersen, O., Dwight, R., Ronzheimer, A., Wild, J.: Development and application of a flexible and efficient environment for aerodynamic shape optimisation. In: Proceedings of the ONERA-DLR Aerospace Symposium (ODAS), Toulouse (2006)

Wild, J.: Acceleration of aerodynamic optimization based on rans-equations by using semi-structured grids. In: Proceedings of the ERCOFTAC Design Optimization: Methods and Applications, Athens (Greece), Paper ERCODO2004_221 (2004)

Samareh, J.A.: Novel shape parameterization approach. NASA TM-1999-209116 (1999)

Samareh, J.A.: Aerodynamic shape optimization based on free-form deformation. In: Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA 2004-4630, Albany, NY (2004)

Ronzheimer, A.: Post-parametrisation of CAD-geometries using free-form deformation and grid generation techniques. In: New Results in Numerical and Experimental Fluid Mechanics IV, vol. 87, pp. 382–389 (2004)

Brodersen, O., Hepperle, H., Ronzheimer, A., Rossow, C.-C., Schöning B.: The parametric grid generation system MegaCads. In: Proceedings of the 5th International Conference on Numerical Grid Generation in Computational Field Simulation, national Science Foundation, Mississippi State University (1996)

Rudnik, R., Thiede, P.: European research on high lift commercial aircraft configurations in the EUROLIFT projects. CEAS/KATnet Conference on Key Aerodynamic Technologies, Bremen (2005)

Wild, J., Brezillon, J., Amoignon, O., Quest, J., Moens, F., Quagliarella, D.: Advanced design by numerical methods and wind tunnel verification within the European high-lift program. J. Aircr. 46(1), 157–167 (2009). AIAA. ISSN 0021-8669

Schittkowski, K.: NLPQLP: A new Fortran implementation of a sequential quadratic programming algorithm for parallel computing. Report, Department of Mathematics, University of Bayreuth (2001)

Esteco, modeFRONTIER V4. http://www.esteco.com/

Brezillon, J., Dwight, R.P., Wild, J.: Numerical aerodynamic optimisation of 3d high-lift configurations. In: Proceedings of 26th Congress of the International Council of the Aeronautical Sciences. Anchorage, AK (2008). ISBN 0-9533991-9-2