Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review

Abdalla, 2006, The performance and oxidation stability of sustainable metalworking fluid derived from vegetable extracts, Proc. Inst. Mech. Eng. B: J. Eng., 220 Julieb, 2003, Design of hard water stable emulsifier systems for petroleum and bio-based semi-synthetic metalworking fluids, Environ. Sci. Technol., 37, 5278, 10.1021/es034437t Abdalla, 2007, Development of novel sustainable neat-oil metalworking fluids for stainless steel and titanium alloy machining. Part 1. Formulation development, J. Adv. Manuf. Technol., 34, 21, 10.1007/s00170-006-0585-4 Bennett, 1983, Water based cutting fluids and human health, Tribol. Int., 45 HSE, 1991 HSE, 1991 HSE, 1994 HSE, 2000 Korde, 1993, Biodegradation of chlorinated aliphatics and aromatic compounds in total-recycle expanded-bed reactors, Appl. Biochem. Biotechnol., 45/46, 731 Zeman, 1995, Biodegradable lubricants—studies on thermooxidation of metal-working fluids by differential scanning calorimetry (DSC), Thermochim. Acta, 268, 9, 10.1016/0040-6031(95)02512-X Bisio, 1995 Li, 2001, Soybean oil–divinylbenzene thermosetting polymers, synthesis, structure, properties and their relationships, Polymer, 42, 1567, 10.1016/S0032-3861(00)00546-2 H.F. Eichenberger, Biodegradable Hydraulic Lubricant—An Overview of Current Developments in Central Europe, Paper No. 910062, 1991. Busch, 1994, Rapidly biodegradable hydraulic fluids, Tribol. Schmi., 41, 17 Flider, 1995, Use of rapeseed oil in lubricants, INFORM, 6, 1031 Operating hydraulics in “Green” fluids, Machine Design, 73–77, January 22, 1993. Vegetable oil based tractor lubricant, Off-Highway Engineering, pp. 7–10, December, 1994. El Baradie, 1996, Cutting fluids: part 1. Characterization, J. Mater. Process. Technol., 56, 786, 10.1016/0924-0136(95)01892-1 T. Norrby, Environmentally Adopted Lubricants—Where are the Opportunities? Statoil. Lubricants R & D, 2003. Matthew, 2007, Influence of fatty acid composition on the Tribological performance of two vegetable-based lubricants, J. Synth. Lubr., 24, 101, 10.1002/jsl.32 de Guzman, 2002, Chem. Mark. Rep., 261, 11 Asadauskas, 1997, Lubrication properties of castor oil—potential basestock for biodegradable lubricants, J. Lubr. Eng., 53, 35 Allawzi, 1998, Physicochemical characteristics and thermal stability of Jordanian Jojoba oil, J. Am. Oil Chem. Soc., 75, 57, 10.1007/s11746-998-0010-2 J. Van Gerpen, B. Shanks, R. Pruszko, D. Clements, G. Knothe, Biodiesel Production Technology, National Renewable Energy Laboratory 〈www.nrel.gov〉, August 2002–January 2004. Asadaukas, 1996, Oxidative stability and antiwear properties of high oeic vegetable oils, J. Lubr. Eng., 52, 877 Kozma, 1997, Investigation into the Scuffing load capacity of environmentally friendly lubricating oils, J. Synth. Lubr., 14, 249, 10.1002/jsl.3000140304 Odi-Owei, 1988, Tribological properties of some vegetable oils and fats, J. Lubr. Eng., 45, 685 Hohn, 1999, Load carrying capacity properties of fast biodegradable gear lubricants, Lubr. Eng., 55, 15 Arnsek, 1999, Lubricating properties of rapeseed-based oils, J. Synth. Lubr., 16, 281, 10.1002/jsl.3000160402 Arnsek, 1999, Scuffing load capacity of rapeseed-based oils, Lubr. Eng., 54, 11 Amsek, 2001, Pitting resistance of rapeseed-based oils, Lubr. Eng., 57, 17 Krzan, 2003, Tribological properties of an environmentally adapted universal tractor transmission oil based on vegetable oil, Tribol. Int., 36, 827, 10.1016/S0301-679X(03)00100-2 Krzan, 2003, Vegetable-based oil as a gear lubricant, Gear Technol., 20, 28 Vizintin, 2000, Lubricating properties of rapeseed oils compare to mineral oils under a high load oscillation, J. Synth. Lubr., 17, 201, 10.1002/jsl.3000170304 Belluco, 2001, Testing of vegetable-based cutting fluids by hole making operations, J. Lubr. Eng., 57, 12 Shashidhara, 2010, Vegetable oils as a potential cutting fluid—an evolution, Tribol. Int., 43, 1073, 10.1016/j.triboint.2009.12.065 Fox, 2007, Vegetable oil based lubricants—a review of oxidation, Tribol. Int., 40, 1035, 10.1016/j.triboint.2006.10.001 Lou, 1996, An investigation of the use of soybean oil in hydraulic systems, Bioresour. Technol., 56, 41, 10.1016/0960-8524(95)00184-0 Anthony Xavior, 2009, Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austentic stainless steel, J. Mater. Process. Technol., 209, 900, 10.1016/j.jmatprotec.2008.02.068 E. Kuram, B. Ozcelik, E. Demirbas, E. Sik, Effects of the cutting fluid types and cutting parameters on surface roughness and thrust force, in: Proceedings of the WCE 2010, London, UK, vol. II, June 30–July 2, 2010. E. Kuram, Investigation of vegetable-based cutting fluids performance in drilling, M.Sc. Thesis, Gebze Institute of Technology, Gebze, Kocaeli, Turkey, 2009, (in Turkish). Davim, 2006, Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions, Proc. Int. Mech. Eng. B: J. Eng., 220, 1605, 10.1243/09544054JEM557 Basavarajappa, 2008, Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques, J. Mater. Process. Technol., 196, 332, 10.1016/j.jmatprotec.2007.05.043 Ramulu, 2008, Drilling of (Al2O3)p/6061 metal matrix composites, J. Mater. Process. Technol., 124, 244, 10.1016/S0924-0136(02)00176-0 Mendes, 2006, The performance of cutting fluids when machining aluminium alloys, Ind. Lubr. Tribol., 58/5, 260, 10.1108/00368790610682662 Shetty, 2009, Experimental studies on turning of discontinuously reinforced aluminium composites under dry, oil water emulsion and steam lubricated conditions using Taguchi's technique, Gazi Univ. J. Sci., 22, 21 Rivero, 2006, An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys, Int. J. Adv. Manuf. Technol., 28, 1, 10.1007/s00170-004-2349-3 Tsao, 2007, An experiment study of hard coating and cutting fluid effect in milling aluminum alloy, Int. J. Adv. Manuf. Technol., 32, 885, 10.1007/s00170-006-0417-6 E. Kuram, B.T. Simsek, B. Ozcelik, E. Demirbas, S. Askin, Optimization of the cutting fluids and parameters using Taguchi and ANOVA in milling, in: Proceedings of the WCE 2010, London, UK, vol. II, June 30–July 2, 2010. Vamsi Krishna, 2010, Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel, Int. J. Mach. Tool Manuf., 50, 911, 10.1016/j.ijmachtools.2010.06.001 S. Sharif, N.M. Yusof, M.H. Idris, Z.B. Ahmad, I. Sudin, A. Ripin, M.A.H. Mat Zin, Feasibility study of using vegetable oil as a cutting lubricant through the use of minimum quantity lubrication during machining, Research VOT No. 78055, Department of Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 2009, 〈http://eprints.utm.my/9729/1/78055.pdf〉. Khan, 2009, Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid, J. Mater. Process. Technol., 209, 5573, 10.1016/j.jmatprotec.2009.05.014 U. Krahenbuhl, Vegetable Oil-based Coolants Improve Cutting Performance, 〈http://www.manufacturingcentre.com/tool/archives/1202/1202oil.asp〉, 2005. Krahenbuhl, 2002 Ojolo, 2008, Experimental determination of the effect of some straight biological oils on cutting force during cylindrical turning, Rev. Matér., 13, 650 Lawal, 2007, Performance evaluation of cutting fluids developed from fixed oils, LEJPT, 10, 137 Belluco, 2004, Performance evaluation of vegetable-based oils in drilling austenitic stainless steel, J. Mater. Process. Technol., 148, 171, 10.1016/S0924-0136(03)00679-4 Montgomery, 1997 Alves, 2006, Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact, J. Mater. Process. Technol., 197, 185, 10.1016/j.jmatprotec.2006.03.090 C. Herrmann, J. Hesselbach, R. Bock, T. Dettmer, Coolants made of native ester-technical, ecological and cost assessment from a life cycle perspective, in: Proceedings of the Fourteenth CIRP Int Conf on Life Cycle Eng, Tokyo, Japan, 2007. Dettmer, 2006 Avila, 2001, The effect of cutting fluids on the machining of hardened AISI 4340 steel, J. Mater. Process. Technol., 119, 21, 10.1016/S0924-0136(01)00891-3 Tool life testing with single point turning tools, ISO 3685, International Standard Organisation, 1977 〈http://www.desilube.com〉. 〈http://www.fitoil.com〉. 〈http://www.cimcool.com〉. Ojolo, 2011, Study of rake face action on cutting using palm-kernel oil as lubricant, J. Emerging Trends Eng. Appl. Sci. (JETEAS), 2, 30 Choundhury, 1998, Machinability of nickel-base super alloys: a general review, J. Mater. Process. Technol., 77, 278, 10.1016/S0924-0136(97)00429-9 Rahim, 2011, A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys, Tribol. Int., 44, 309, 10.1016/j.triboint.2010.10.032 DIN ISO 14040ff, Umweltmanagement-Ökobilanzen-Festlegung des Ziels und des Untersuchungsrahmens sowie Sachbilanz (dt. Und engl.), Berlin, Deutschland, 1998. McCoy, 1994, Introduction: tracing the historical development of metalworking fluids, 1 E. Kalhofer, Dry machining-principles and applications, in: Proceedings of the Second Seminario Inter. de Alta Tecnologia UNIMEP, Santa Barbara D'Oeste, SP, Julho, Brazil, 1997, pp. 519–526. Klocke, 1997, Dry cutting, CIRP, 46, 519, 10.1016/S0007-8506(07)60877-4