Application of response surface methodology in optimizing the process conditions for the regeneration of used mobil oil using different kinds of acids

Ababio, 2001 Abro, 2013 Abu-Elella, 2015, Used motor oil treatment: turning waste oil into valuable products, Int. J. Chem. Biochem. Sci., 7, 57 Adebayo, 2004, Physico-chemical treatments and analyses of crankcase oil, Ultra Sci, 16, 19 Adeyanju, 2016, Optimization of oil extracted from coconut using response surface methodology, J. Chem. Pharmaceut. Res., 8, 374 Agu, 2015, Process parameter optimization for transformer oil extraction from Terminalia catappa seed using response surface methodology, J. Chin. Adv. Mater. Soc., 3, 328, 10.1080/22243682.2015.1088794 Ajemba, 2012, Enhancement of physicochemical properties of nteje clay to increase its bleaching performance using acid activation, Int. J. Eng. Res. Afr., 2, 281 Asadu, 2019, Survey on Solid Wastes Management by Composting: optimization of key process parameters for biofertilizer synthesis from agro wastes using response surface methodology (RSM), Artif. Intell. Agric., 3, 52 2007 Bartels, 1970, Improved atomic absorption techniques for measuring iron particles in lubricating oil, At. Absorpt. Newsl., 9, 78 Bas, 2007, Modeling and optimization 1: usability of response surface methodology, J. Food Eng., 78, 836, 10.1016/j.jfoodeng.2005.11.024 Bertrand, 1980, Determination of lead in lubricating oils by isotopic dilution secondary ion mass spectrometry, Anal. Chem., 52, 12, 10.1021/ac50058a028 Boughton, 2004, Environmental assessment of waste oil management methods, ES T (Environ. Sci. Technol.), 38, 353 Boyaci, 2005, A new approach for determination of enzyme kinetic constants using response surface methodology, Biochem. Eng. J., 25, 55, 10.1016/j.bej.2005.04.001 Cassap, 2008, The analysis of used lubrication oils by inductively coupled plasma spectrometry for predictive maintenance, Spectrosc. Eur., 20, 17 Chen, 2011, Application of response surfacemethodology for optimization of the synthesis of synthetic rutile from titania slag, Appl. Surf. Sci., 258, 3068, 10.1016/j.apsusc.2011.11.039 Dabai, 2019, Comparative study of regeneration of used lubricating oil using sulphuric and oxalic acids/clay treatment process, IJISET - Int. J. Innovat. Sci. Engin. Techn., 6 Datta, 2011, Adsorption removal of chromium (VI) from aqueous solution over powdered activated carbon: optimization through response surface methodology, J. Hazard Mater., 173, 135 Doaa, 2017, Recycling of used engine oil by different solvent, Egypt. J. Petrol., 27, 221 Eldeen, 2017, Recycling of waste engine oils using different acids as washing agents, Int. J. Oil Gas Coal Eng., 5, 69, 10.11648/j.ogce.20170505.11 Emman, 2012, Re-refining of used lube oil, II- by solvent/clay and acid/clay-percolation processes, ARPN J. Sci. Technol., 4, 34 Friday, 2008, Comparative investigation of wear metals in virgin and used lubricant oils, Terr. Aquat. Environ. Toxicol., 2, 38 Hamad, 2005, Used lubricating oil recycling using hydrocarbon solvent, J-Unviron. Manage;, 74, 153 Hamawand, 2013, Recycling of waste engine oils using a new washing agent, Energies, 1023, 10.3390/en6021023 Hussein, 2014, Used lubricating oils Re-refining by solvent extraction, Am. J. Environ. Eng. Sci., 1, 44 Isah, 2013, Regeneration of used engine oil, I Jha, 2005, Re-refining of used lube oils: an intelligent and eco-friendly option, Indian Chem. Eng., 473, 209 Kadam, 1985, Infrared spectroscopic analysis of used crankcase oil, Res. Ind., 30, 382 Lukasiewicz, 1977, Direct determination of manganese in gasoline by atomic absorption spectrometry in the nitrous oxide-hydrogen flame, Appl. Spectrosc., 31, 541, 10.1366/000370277774464110 Montgomery, 2004 Myers, 2002 Ogbeide, 2011, An investigation to the recycling of spent engine oil, J. Eng. Sci. Tech. Rev., 3, 32, 10.25103/jestr.031.06 Onukwuli, 2015, Optimization of high performance styrenated alkyd resin for surface coating using response surface methodology, Int. J. Novel Res. Phy. Chem. Math., 2, 33 Opeyemi, 2004 Rincon, 2005, Regeneration of used lubricating oil by polar solvent extraction, Ind. Eng. Chem. Res., 44, 43, 10.1021/ie040254j Shrivastsvs, 2008, Media optimization for the production of U-linolenic acid by cunninghamella echinulata varielegans MTCC 522 using response surface methodology, Int. J. Food Eng., 4, 1 Taran, 2015, Designing and optimization of separation process of iron impurities from kaolin by oxalic acid in bench-scale stirred-tank reactor, Appl. Clay Sci., 107, 10.1016/j.clay.2015.01.010 Udonne, 2011, A comparative study of recycling of used lubrication oils using distillation, acids and activated charcoal with clay methods, J. Petrol. Gas Eng., 2, 12 Udonne, 2013, Recycling of used lubricant oil using three samples of Acids and clay as a method of Treatment, Int. Arc. Appl. Sci. Tech., 8 Van de Voort, 2006, FTIR condition monitoring of in-service lubricants: ongoing developments and future perspectives, Tribol. Trans., 49, 410, 10.1080/10402000600781432 Vazquez-Duhalt, 1989, Biodegradation of used motor oil by bacteria promotes the solubilization of heavy metals, Sci. Total Environ., 52, 109, 10.1016/0048-9697(86)90108-7