Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook

Lin, 2005, Experimental study of under-floor electric heating system with shape-stabilized PCM plates, Energy and Buildings, 37, 215, 10.1016/j.enbuild.2004.06.017

Zalba, 2003, Review on thermal energy storage with phase change materials, heat transfer analysis and applications, Applied Thermal Engineering, 23, 251, 10.1016/S1359-4311(02)00192-8

Khudhair, 2004, A review on energy conservation in building applications with thermal storage by latent heat using phase change materials, Energy Conversion and Management, 45, 263, 10.1016/S0196-8904(03)00131-6

Telkes M. Thermal storage for solar heating and cooling. In: Proceedings of the workshop on solar energy storage subsystems for the heating and cooling of buildings. Charlottesville, VA, USA; 1975.

Lane, 1986

Zhang, 2006, Ideal thermophysical properties for free-cooling (or heating) buildings with constant thermal physical property material, Energy and Buildings, 38, 1164, 10.1016/j.enbuild.2006.01.008

Asan, 1998, Effects of wall's thermophysical properties on time lag and decrement factor, Energy and Buildings, 28, 159, 10.1016/S0378-7788(98)00007-3

Zhang YP, Lin KP, Zhang QL, Xiao W. Study of nonlinear properties of phase change material building envelopes. Energy and Buildings, submitted for publication.

Bakos, 2000, Energy management method for auxiliary energy saving in a passive-solar-heated residence using low-cost off-peak electricity, Energy and Buildings, 31, 237, 10.1016/S0378-7788(99)00017-1

Lin, 2004, Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates, Building and Environment, 39, 1427, 10.1016/j.buildenv.2004.04.005

Kang, 2003, Modeling and experimental study on an innovative passive cooling system—NVP system, Energy and Building, 35, 417, 10.1016/S0378-7788(02)00141-X

Farid, 2004, A review on phase change energy storage: materials and applications, Energy Conversion and Management, 45, 1597, 10.1016/j.enconman.2003.09.015

Peippo, 1991, Multicomponent PCM wall optimized for passive solar heating, Energy and Buildings, 17, 259, 10.1016/0378-7788(91)90009-R

Neeper, 2000, Thermal dynamics of wallboard with latent heat storage, Solar Energy, 68, 393, 10.1016/S0038-092X(00)00012-8

Heim, 2004, Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r, Energy and Buildings, 36, 795, 10.1016/j.enbuild.2004.01.004

Onishi, 2001, Numerical study on a low energy architecture based upon distributed heat storage system, Renewable Energy, 22, 61, 10.1016/S0960-1481(00)00049-5

Stritih, 1996, Solar heat storage wall for building ventilation, Renewable Energy, 8, 268, 10.1016/0960-1481(96)88860-4

Nikolic, 2003, New materials for solar thermal storage-solid/liquid transitions in fatty acid esters, Solar Energy Materials and Solar Cells, 79, 285, 10.1016/S0927-0248(02)00412-9

Hadjieva, 2000, Composite salt-hydrate concrete system for building energy storage, Renewable Energy, 19, 111, 10.1016/S0960-1481(99)00024-5

Cabeza, 2005, Long term immersion corrosion tests on metal-PCM pairs used for latent heat storage in the 24 to 29°C temperature range, Materials and Corrosion, 56, 33, 10.1002/maco.200403806

Koschenz, 2004, Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings, Energy and Buildings, 36, 567, 10.1016/j.enbuild.2004.01.029

Darkwa, 2004, Heat transfer in neuron composite laminated phase-change drywall, Proceedings of the Institution of Mechanical Engineers Part A—Journal of Power and Energy, 218, 83, 10.1243/095765004773644085

Kim, 2003, Simulation of an integrated PCM–wallboard system, International Journal of Energy Research, 27, 215, 10.1002/er.869

Darkwa, 2005, Dynamics of energy storage in phase change drywall systems, International Journal of Energy Research, 29, 335, 10.1002/er.1062

Darkwa, 2006, Simulation of Phase-change drywalls in a passive-solar building, Applied Thermal Engineering, 26, 853, 10.1016/j.applthermaleng.2005.10.007

Feldman, 1991, Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard, Solar Energy Materials, 22, 231, 10.1016/0165-1633(91)90021-C

Banu, 1998, Evaluation of thermal storage as latent heat in phase change material wallboard by differential scanning calorimetry and large scale thermal testing, Thermochimica Acta, 317, 39, 10.1016/S0040-6031(98)00368-2

Scalat, 1996, Full scale thermal testing of latent heat storage in wallboard, Solar Energy Materials and Solar Cells, 44, 49, 10.1016/0927-0248(96)00017-7

Feldman, 1996, DSC analysis for the evaluation of an energy storing wallboard, Thermochimica Acta, 272, 243, 10.1016/0040-6031(95)02456-5

Hawes, 1993, Latent heat storage in building materials, Energy and Buildings, 20, 77, 10.1016/0378-7788(93)90040-2

Lv, 2006, Impact of phase change wall room on indoor thermal environment in winter, Energy and Buildings, 38, 18, 10.1016/j.enbuild.2005.02.007

Kauranen, 1991, Organic PCM storage system with adjustable melting temperature, Solar Energy, 46, 275, 10.1016/0038-092X(91)90094-D

Ismail, 1997, PCM thermal insulation in buildings, International Journal of Energy Research, 21, 1281, 10.1002/(SICI)1099-114X(199711)21:14<1281::AID-ER322>3.0.CO;2-P

Weinlader, 2005, PCM–facade-panel for daylighting and room heating, Solar Energy, 78, 177, 10.1016/j.solener.2004.04.013

Hadjieva, 1992, Thermophysical properties of some paraffins applicable to thermal energy storage, Solar Energy Materials and Solar Cells, 27, 181, 10.1016/0927-0248(92)90119-A

Salyer IO, Sircar AK. Phase change materials for heating and cooling of residential buildings and other applications. Proceedings of the 25th intersociety energy conversion engineering conference—IECEC’90, 1990.

Banu, 1998, Energy-storing wallboard: flammability tests, Journal of Materials in Civil Engineering, 10, 98, 10.1061/(ASCE)0899-1561(1998)10:2(98)

Inaba, 1997, Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid–liquid phase change material, Heat and Mass Transfer, 32, 307, 10.1007/s002310050126

Zhang, 1999, A simple method, the T-history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials, Measurement Science and Technology, 10, 201, 10.1088/0957-0233/10/3/015

Marin, 2003, Determination of enthalpy-temperature curves of phase change materials with the temperature-history method: improvement to temperature dependent properties, Measurement Science and Technology, 14, 184, 10.1088/0957-0233/14/2/305

Hong, 2004, Accuracy improvement of T-history method for measuring heat of fusion of various materials, International Journal of Refrigeration, 27, 360, 10.1016/j.ijrefrig.2003.12.006

Marco I. Seminar on phase change materials and innovation products—Brianza Plastica. Beijing, China, October 20, 2005, Tsinghua University.

Stovall, 1995, What are the potential benefits of including latent storage in common wallboard?, Journal of Solar Energy Engineering-Transactions of the ASME, 117, 318, 10.1115/1.2847868

Kaasinen, 1992, Absorption of phase change substances into commonly used building materials, Solar Energy Materials and Solar Cells, 27, 173, 10.1016/0927-0248(92)90118-9

Hawes, 1992, Absorption of phase change materials in concrete, Solar Energy Materials and Solar Cells, 27, 91, 10.1016/0927-0248(92)90112-3

Schossig, 2005, Micro-encapsulated phase-change materials integrated into construction materials, Solar Energy Materials and Solar Cells, 89, 297, 10.1016/j.solmat.2005.01.017

Zhang, 2005, Development of a thermally enhanced frame wall with phase-change materials for on-peak air conditioning demand reduction and energy savings in residential buildings, International Journal of Energy Research, 29, 795, 10.1002/er.1082

Hawlader, 2003, Microencapsulated PCM thermal-energy storage system, Applied Energy, 74, 195, 10.1016/S0306-2619(02)00146-0

Zhang YP, Yang R, Di HF, Lin KP, Xu X, Qin PH. Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings. Collection of technical papers—second international energy conversion engineering conference AIAA, vol. 1, 2004. p. 600–10.

Xiao, 2002, Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity, Energy Conversion and Management, 43, 103, 10.1016/S0196-8904(01)00010-3

Ye, 2000, Preparation of polyethylene-paraffin compound as a form-stable solid–liquid phase change material, Solar Energy Materials and Solar Cells, 64, 37, 10.1016/S0927-0248(00)00041-6

Xiao, 2001, Thermal performance of a high conductive shape-stabilized thermal storage material, Solar Energy Materials and Solar Cells, 69, 293, 10.1016/S0927-0248(01)00056-3

Athienitis, 1997, Investigation of the thermal performance of a passive solar test-room with wall latent heat storage, Building and Environment, 32, 405, 10.1016/S0360-1323(97)00009-7

Manz, 1997, TIM-PCM external wall system for solar space heating and daylighting, Solar Energy, 61, 369, 10.1016/S0038-092X(97)00086-8

Ibanez, 2005, An approach to the simulation of PCMs in building applications using TRNSYS, Applied Thermal Engineering, 25, 1796, 10.1016/j.applthermaleng.2004.11.001

Farid, 1999, Domestic electrical space heating with heat storage, Proceedings of the Institution of Mechanical Engineers Part A—Journal of Power and Energy, 213, 83, 10.1243/0957650991537455

Farid, 2001, Underfloor heating with latent heat storage, Proceedings of the Institution of Mechanical Engineers Part A, 215, 601

Amir, 1999, Thermal analysis of electric heating floor panels with daily heat storage, International Journal of Thermal Science, 38, 121, 10.1016/S1290-0729(99)80049-0

Xu, 2005, Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings, Energy and Buildings, 37, 1084, 10.1016/j.enbuild.2004.12.016

Ismail, 2001, Thermally effective windows with moving phase change material curtains, Applied Thermal Engineering, 21, 1909, 10.1016/S1359-4311(01)00058-8

Ismail, 2002, Parametric study on composite and PCM glass systems, Energy Conversion and Management, 43, 973, 10.1016/S0196-8904(01)00083-8

Kang, 1999, A general model for analyzing the thermal characteristics of a class of latent heat thermal energy storage system, Journal of Solar Energy Engineering—Transactions of the ASME, 121, 185, 10.1115/1.2888165

Zhu, 1999, Thermal storage and heat transfer in phase change material outside a circular tube with axial variation of the heat transfer fluid temperature, Journal of Solar Energy Engineering—Transactions of the ASME, 121, 145, 10.1115/1.2888425

Zhang, 2001, A general model for analyzing the thermal performance of the heat charging and discharging processes of latent heat thermal energy storage systems, Journal of Solar Energy Engineering—Transactions of the ASME, 123, 232, 10.1115/1.1374206

Velraj, 1999, Heat transfer enhancement in a latent heat storage system, Solar Energy, 65, 171, 10.1016/S0038-092X(98)00128-5

Stritih, 2003, Heat transfer enhancement in latent heat thermal storage system for buildings, Energy and Buildings, 35, 1097, 10.1016/j.enbuild.2003.07.001

Zhang, 2006, Influence of additives on thermal conductivity of shape-stabilized phase change material, Solar Energy Materials and Solar Cells, 90, 1692, 10.1016/j.solmat.2005.09.007