Application of Taguchi method in the optimization of end milling parameters

S.H. Park, Robust Design and Analysis for Quality Engineering, Chapman & Hall, London, 1996. R. Unal, E.B. Dean, Taguchi approach to design optimization for quality and cost: an overview, in: Proceedings of the International Society of Parametric Analyst 13th Annual, May 21–24, 1991. M.S. Phadke, Quality Engineering Using Robust Design, Prentice-Hall, Englewood Cliffs, NJ, 1989. T. Bendell, Taguchi methods, in: Proceedings of the 1988 European Conference on Taguchi Method, Elsevier, Amsterdam, 13–14 July, 1988. V.K. Roy, Nutek, Inc. http://www.vkroy.com/up-doe.html. Yang, 1998, Design optimisation of cutting parameters for turning operations based on the Taguchi method, J. Mater. Process. Technol., 84, 122, 10.1016/S0924-0136(98)00079-X Lin, 2002, Experimental design and performance analysis of tin-coated carbide tool in face milling stainless steel, J. Mater. Process. Technol., 5654, 1, 10.1016/S0924-0136(02)00026-2 Tsui, 1999, Modeling and analysis of dynamic robust design experiments, IEE Trans., 31, 113, 10.1080/07408179908969912 Zhang, 1998, Robust design of assembly and machining tolerance allocations, IEE Trans., 30, 17, 10.1023/A:1007437427523 Si, 1997, Multi response robust design by principal component analysis, Total Qual. Manage., 8, 409, 10.1080/0954412979415 J. Kopac, M. Bahor, M. Sokovic, Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel workpieces, Int. J. Mach. Tool Manuf. 42 (2002) 707–796. P.G. Benardos, G.C. Vosniakos, Prediction of surface roughness in cnc face milling using neural networks and Taguchi’s design of experiments, Robot. Comput. Integr. Manuf. 18 (2002) 343–351. M.S. Phadke, Quality Engineering Using Design of Experiments, Quality Control, Robust Design, and the Taguchi Method, Wadsworth & Books, California, 1988. M.E. Martellotti, An analysis of the milling process, Trans. ASME (1941) 677–695. Borneman, 1938, Chip thickness in milling, Am. Mach. Ref. Book Sheet, 82, 189 E.M. Trent, Metal Cutting, 3rd ed., Butterworths, Heinemann, 1991. Li, 2002, Milling force prediction using a dynamic shear length model, Int. J. Mach. Tools Manuf., 42, 277, 10.1016/S0890-6955(01)00098-0 Philip, 1971, Built-up edge phenomena in machining steel with carbide, Int. J. Mach. Tool Des. Res., 11, 121, 10.1016/0020-7357(71)90021-7