Application of Reddy's third-order theory to delaminated orthotropic composite plates
Tóm tắt
Từ khóa
Tài liệu tham khảo
Anderson, 2005
Argüelles, 2011, Influence of resin type on the delamination behavior of carbon fiber reinforced composites under mode-II loading, Int. J. Damage Mech., 20, 963, 10.1177/1056789510369332
Arrese, 2010, A new method for determining mode II R-curve by the end-notched flexure test, Eng. Fract. Mech., 77, 51, 10.1016/j.engfracmech.2009.09.008
Bennati, 2009, An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates, Compos. Sci. Technol., 69, 1735, 10.1016/j.compscitech.2009.01.019
Bennati, 2013, An enhanced beam-theory model of the mixed-mode bending (MMB) test – part I: literature review and mechanical model, Meccanica, 48, 443, 10.1007/s11012-012-9686-3
Bennati, 2013, An enhanced beam-theory model of the mixed-mode bending (MMB) test – part II: applications and results, Meccanica, 48, 465, 10.1007/s11012-012-9682-7
Browning, 2010, Redesign of the ECT test for mode III delamination testing. Part I: finite element analysis, J. Compos. Mater., 44, 1867, 10.1177/0021998309356606
Browning, 2011, Modification of the edge crack torsion specimen for mode III delamination testing. Part II-experimental study, J. Compos. Mater., 45, 2633, 10.1177/0021998311401115
Brunner, 2008, A status report on delamination resistance testing of polymer-matrix composites, Eng. Fract. Mech., 75, 2779, 10.1016/j.engfracmech.2007.03.012
Brunner, 2005, Prospects in fracture mechanics of “engineering” laminates, Eng. Fract. Mech., 72, 899, 10.1016/j.engfracmech.2004.08.002
Bruno, 2005, A 3D delamination modelling technique based on plate and interface theories for laminated structures, Eur. J. Mech. A/Solids, 24, 127, 10.1016/j.euromechsol.2004.11.005
Cherepanov, 1997
Chou, 1967
Davidson, 2011, Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test, Compos. A Appl. Sci. Manuf., 42, 589, 10.1016/j.compositesa.2011.01.018
Davidson, 1995, Three-dimensional analysis of center-delaminated unidirectional and multidirectional single-leg bending specimens, Compos. Sci. Technol., 54, 385, 10.1016/0266-3538(95)00069-0
Davidson, 2000, Determination of energy release rate and mode mix in three-dimensional layered structures using plate theory, Int. J. Fract., 105, 81, 10.1023/A:1007672131026
Garvan, 2002
Hosseini-Hashemi, 2011, Exact solutions for free flexural vibration of ivy-type rectangular thick plates via third-order shear deformation, Appl. Math. Model., 35, 708, 10.1016/j.apm.2010.07.028
Jumel, 2011, Beam on elastic foundation with anticlastic curvature: application to analysis of mode I fracture tests, Eng. Fract. Mech., 78, 3253, 10.1016/j.engfracmech.2011.09.014
Kapuria, 2012, Boundary layer effects in Levy-type rectangular piezoelectric composite plates using a coupled efficient layerwise theory, Eur. J. Mech. A/Solids, 36, 122, 10.1016/j.euromechsol.2012.02.015
Kim, 2011, Experimental and numerical investigations of mode I delamination behaviors of woven fabric composites with carbon, kevlar and their hybrid fibers, Int. J. Precis. Eng. Manuf., 12, 321, 10.1007/s12541-011-0042-7
Kollár, 2003
Kondo, 2011, Fracture resistance of carbon/epoxy composite laminates under mixed-mode II and III failure and its dependence on fracture morphology, Adv. Compos. Mater., 20, 405, 10.1163/092430411X568197
Kondo, 2010, Characterization of fracture resistance of carbon/epoxy composite laminates during mixed-mode II and III stable damage propagation, J. Jpn. Soc. Compos. Mater., 36, 179, 10.6089/jscm.36.179
Kulkarni, 2007, A new discrete Kirchhoff quadrilateral element based on the third-order theory for composite plates, Comput. Mech., 39, 237, 10.1007/s00466-005-0020-y
Luo, 2009, Energy release rates for interlaminar delamination in laminates considering transverse shear effects, Compos. Struct., 89, 235, 10.1016/j.compstruct.2008.07.015
Marat-Mendes, 2010, Failure criteria for mixed mode delamination in glass fibre epoxy composites, Compos. Struct., 92, 2292, 10.1016/j.compstruct.2009.07.017
Mladensky, 2013, Analysis of mixed mode II/III crack in bilayered composite beam, J. Theor. Appl. Mech., 42, 41, 10.2478/v10254-012-0019-7
de Morais, 2008, Mixed mode II + III interlaminar fracture of carbon/epoxy laminates, Compos. Sci. Technol., 68, 2022, 10.1016/j.compscitech.2008.02.023
de Morais, 2009, Mode III interlaminar fracture of carbon/epoxy laminates using a four-point bending plate test, Compos. A Appl. Sci. Manuf., 40, 1741, 10.1016/j.compositesa.2009.08.009
de Morais, 2011, Mode III interlaminar fracture of carbon/epoxy laminates using the six-point edge crack torsion (6ECT), Compos. A Appl. Sci. Manuf., 42, 1793, 10.1016/j.compositesa.2011.08.002
de Moura, 2009, Numerical analysis of the edge crack torsion test for mode III interlaminar fracture of composite laminates, Eng. Fract. Mech., 76, 469, 10.1016/j.engfracmech.2008.10.004
Nikbakht, 2010, 2D and 3D interlaminar fracture assessment under mixed-mode loading conditions, Mater. Sci. Eng. A, 516, 162, 10.1016/j.msea.2009.03.011
Park, 2002, Crack-tip force method for computing energy release rate in delaminated plates, Compos. Struct., 55, 429, 10.1016/S0263-8223(01)00170-2
Peng, 2011, Mode I delamination growth of multidirectional composite laminates under fatigue loading, J. Compos. Mater., 45, 1077, 10.1177/0021998310385029
Pereira, 2009, Mixed-mode I + III interlaminar fracture of carbon/epoxy laminates, Compos. A Appl. Sci. Manuf., 40, 518, 10.1016/j.compositesa.2009.02.003
Pereira, 2011, Design and analysis of a new six-point edge crack torsion (6ECT) specimen for mode III interlaminar fracture characterisation, Compos. A Appl. Sci. Manuf., 42, 131, 10.1016/j.compositesa.2010.10.013
1989
Reddy, 2004
Reeder, 1990, Mixed-mode bending method for delamination testing, AIAA J., 28, 1270, 10.2514/3.25204
Ren, 1986, The finite element analysis of homogeneous and laminated composite plates using a simple higher order theory, Commun. Appl. Numer. Methods, 2, 217, 10.1002/cnm.1630020214
Rice, 1968, A path independent integral and the approximate analysis of strain concentration by notches and cracks, J. Appl. Mech., 35, 379, 10.1115/1.3601206
Rigby, 1998, Decomposition of the mixed-mode J-integral – revisited, Int. J. Solids Struct., 35, 2073, 10.1016/S0020-7683(97)00171-6
Rizov, 2006, Mode III interlaminar fracture behaviour of glass fiber reinforced polymer woven laminates at 293 to 4 K, Appl. Compos. Mater., 13, 287, 10.1007/s10443-006-9008-9
Saeedi, 2012, Delaminated multilayered plates under uniaxial extension. part I: analytical analysis using a layerwise stress approach, Int. J. Solids Struct., 49, 3711, 10.1016/j.ijsolstr.2012.08.005
Saeedi, 2012, Delaminated multilayered plates under uniaxial extension. part II: efficient layerwise mesh strategy for the prediction of delamination onset, Int. J. Solids Struct., 49, 3727, 10.1016/j.ijsolstr.2012.08.003
Saeedi, 2013, Cylindrical bending of multilayered plates with multi-delamination via a layerwise stress approach, Compos. Struct., 95, 728, 10.1016/j.compstruct.2012.08.037
Saeedi, 2013, Stress analysis of long multilayered plates subjected to invariant loading: analytical solutions by a layerwise stress model, Compos. Struct., 100, 307, 10.1016/j.compstruct.2013.01.003
Sankar, 1995, Pointwise energy release rate in delaminated plates, AIAA J., 33, 1312, 10.2514/3.12441
Shivakumar, 1992, An equivalent domain integral method for three-dimensional mixed-mode fracture problems, Eng. Fract. Mech., 42, 935, 10.1016/0013-7944(92)90134-Z
Sorensen, 2007
Sorensen, 2007, Delamination detection and characterisation of bridging tractions using long FBG optical sensors, Compos. A Appl. Sci. Manuf., 38, 2087, 10.1016/j.compositesa.2007.07.009
Suemasu, 2010, Novel test method for mixed mode II and III interlaminar fracture toughness, Adv. Compos. Mater., 19, 349, 10.1163/092430410X504143
Szekrényes, 2007, Delamination fracture analysis in the GII-GIII plane using prestressed composite beams, Int. J. Solids Struct., 44, 3359, 10.1016/j.ijsolstr.2006.09.029
Szekrényes, 2009, Improved analysis of the modified split-cantilever beam for mode III fracture, Int. J. Mech. Sci., 51, 682, 10.1016/j.ijmecsci.2009.07.005
Szekrényes, 2009, Interlaminar fracture analysis in the GI-GIII plane using prestressed composite beams, Compos. A Appl. Sci. Manuf., 40, 1621, 10.1016/j.compositesa.2009.07.009
Szekrényes, 2011, Interlaminar fracture analysis in the GI -GII -GIII space using prestressed composite beams, J. Reinf. Plast. Compos., 30, 1655, 10.1177/0731684411418549
Szekrényes, 2012, Interlaminar fracture analysis in the GII-GIII plane using prestressed composite beams, Compos. A Appl. Sci. Manuf., 43, 95, 10.1016/j.compositesa.2011.09.022
Szekrényes, 2012, Interlaminar stresses and energy release rates in delaminated orthotropic composite plates, Int. J. Solids Struct., 49, 2460, 10.1016/j.ijsolstr.2012.05.010
Szekrényes, 2013, Analysis of classical and first-order shear deformable cracked orthotropic plates, J. Compos. Mater., 10.1177/0021998313487756
Szekrényes, 2013, Interface crack between isotropic Kirchhoff plates, Meccanica, 48, 507, 10.1007/s11012-012-9611-9
Szekrényes, 2013, Interface fracture in orthotropic composite plates using second-order shear deformation theory, Int. J. Damage Mech., 10.1177/1056789513478957
Szekrényes, 2013, Stress and fracture analysis in delaminated orthotropic composite plates using third-order shear deformation theory, Appl. Math. Model.
Thai, 2012, Lévy-type solution for free vibration analysis of orthotropic plates based on two variable refined plate theory, Appl. Math. Model., 36, 3870, 10.1016/j.apm.2011.11.003
Tsai, 1992