Application of Cold Gas Dynamic Spraying as an Additive Technology for Producing Materials Based on Nickel Aluminide and Titanium Aluminide

Gibson, D. and Rosen, B.S., Additive Manufacturing Technologies, New York: Springer, 2010.

Gu, D.D. et al., Laser additive manufacturing of metallic components: Materials, processes and mechanisms, Int. Mater. Rev., 2012, vol. 57, no. 3, pp. 133–164.

Murr, L.E., Frontiers of 3D printing/additive manufacturing: from human organs to aircraft fabrication, J. Mater. Sci. Technol., 2016, vol. 32, no. 10, pp. 987–995.

Assadi, H. et al., Cold spraying – a materials perspective, Acta Mater., 2016, vol. 116, pp. 382–407.

Papyrin, A., Cold spray technology, Adv. Mater. Process., 2001, vol. 159, pp. 49–51.

Arabgol, Z. et al., Analysis of thermal history and residual stress in cold-sprayed coatings, J. Therm. Spray Technol., 2014, vol. 23, no. 1, pp. 84–90.

Li, W. et al., Solid-state additive manufacturing and repairing by cold spraying: A review, J. Mater. Sci. Technol., 2018, vol. 34, no. 3, pp. 440–457.

Ziemian, C.W., Wright, W.J., and Cipoletti, D.E., Influence of impact conditions on feedstock deposition behavior of cold-sprayed Fe-based metallic glass, J. Therm. Spray Technol., 2018, vol. 27, no. 5, pp. 843–856.

Karmakar, R., Maji, P., and Ghosh, S.K., A review on the nickel based metal matrix composite coating, Met. Mater. Int., 2021, vol. 27, pp. 2134–2145. https://doi.org/10.1007/s12540-020-00872-w

Champagne, V. and Helfritch, D., The unique abilities of cold spray deposition, Int. Mater. Rev., 2016, vol. 61, no. 7, pp. 437–455.

Suhonen, T. et al., Residual stress development in cold sprayed Al, Cu and Ti coatings, Acta Mater., 2013, vol. 61, pp. 6329–6337.

Coddet, P. et al., Comparison of the properties of cold-sprayed Cu–0.5Cr–0.05Zr alloys after various heat treatments versus forged and vacuum plasma-sprayed alloys, J. Therm. Spray Technol., 2014, vol. 23, no. 3, pp. 486–491.

Coddet, P. et al., Mechanical properties of Cu–0.1Ag alloys deposited by cold spray with various powder feed rate and heat treatment, J. Therm. Spray Technol., 2015, vol. 24, no. 1, pp. 119–125.

Pogrebnjak, A.D. et al., The structure and properties of high-entropy alloys and nitride coatings based on them, Russ. Chem. Rev., 2014, vol. 83, no. 11, pp. 1027–1061.

Bagherifard, S., Roscioli, G., Zuccoli, M.V., Hadi, M., D’Elia, G., Demir, A.G., Previtali, B., Kondás, J., and Guagliano, M., Cold spray deposition of freestanding inconel samples and comparative analysis with selective laser melting, J. Therm. Spray Technol., 2017, vol. 26, pp. 1517–1526.

Gerashchenkov, D.A., Vasiliev A.F., Farmakovsky, B.V., and Mashek, A.Ch., Study of the flow temperature in the cold gas-dynamic spraying of the functional coatings, Vopr. Materialoved., 2014, no. 1 (77), pp. 87–96. https://elibrary.ru/item.asp?id=21515704

Zhao, H. and Bing, C., Formation of TiB2–TiC composites by reactive sintering, Ceram. Int., 1999, vol. 25, pp. 353–358.

Pan, C., Zhang, J., and Zhu, B., Structure formation and densification of TiB2–TiC–Ni composites produced by chemical reaction of Ti–B4C system in high-gravity field, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 382, no. 2, art. ID 22049.