Anomalous aging of EPDM and FEPM under combined thermo-oxidative and hydrolytic conditions

Sugama, 2015, Degradation of different elastomeric polymers in simulated geothermal environments at 300 °C, Polym. Degrad. Stab., 120, 328, 10.1016/j.polymdegradstab.2015.07.010 Sugama, 2001, Surface analyses of fluoroelastomer bearings exposed to geothermal environments, Mater Lett., 50, 66, 10.1016/S0167-577X(00)00415-8 Sugama, 2001, Hydrothermal oxidation of fluoroelastomer bearings after a year-long exposure to geothermal environments, J. Mater Sci. Lett., 20, 1737, 10.1023/A:1012454209899 Mitra, 2004, Chemical degradation of fluoroelastomer in an alkaline environment, Polym. Degrad. Stab., 83, 195, 10.1016/S0141-3910(03)00235-0 Embury, 2004, High-pressure gas testing of elastomer seals and a practical approach to designing for explosive decompression service, Seal. Tech., 6, 10.1016/S1350-4789(04)00231-4 Silverman, 2003 Endo, 2008, Extreme-performance rubber nanocomposites for probing and excavating deep oil resources using multi-walled carbon nanotubes, Adv. Funct. Mater, 18, 3403, 10.1002/adfm.200801136 Rogers, 2011, Achieving RGD resistance to meet current oilfield needs, Seal. Tech., 9, 10.1016/S1350-4789(11)70385-3 Lin, 2011, Dynamic mechanical characteristics of five elastomeric gasket materials aged in a simulated and an accelerated PEM fuel cell environment, Int. J. Hydrogen Energy, 36, 6756, 10.1016/j.ijhydene.2011.02.112 Tan, 2008, Degradation characteristics of elastomeric gasket materials in a simulated PEM fuel cell environment, J. Mater Eng. Perform., 17, 785, 10.1007/s11665-008-9233-5 Bernstein, 2009, Predicting the lifetime of fluorosilicone o-rings, Polym. Degrad. Stab., 94, 2107, 10.1016/j.polymdegradstab.2009.10.005 Gillen, 2005, Predicting and confirming the lifetime of o-rings, Polym. Degrad. Stab., 87, 257, 10.1016/j.polymdegradstab.2004.07.019 Gillen, 2003, Validation of improved methods for predicting long-term elastomeric seal lifetimes from compression stress–relaxation and oxygen consumption techniques, Polym. Degrad. Stab., 82, 25, 10.1016/S0141-3910(03)00159-9 Gillen, 2000, Methods for predicting more confident lifetimes of seals in air environments, Rubber Chem. Technol., 27, 265, 10.5254/1.3547590 Gillen, 1998 Delor, 1998, Ageing of EPDM - 2. Role of hydroperoxides in photo- and thermo-oxidation, Polym. Degrad. Stab., 60, 321, 10.1016/S0141-3910(97)00087-6 van Duin, 2010, Mechanism of peroxide cross-linking of EPDM rubber, Macromol. Symp., 291–292, 66, 10.1002/masy.201050508 Harwood, 1983, Ethylene-propylene-diene monomer (EPDM) and fluorocarbon (FKM) elastomers in the geothermal environment, J. Test. Eval., 11, 289, 10.1520/JTE10292J Wise, 1995, An ultrasensitive technique for testing the Arrhenius extrapolation assumption for thermally aged elastomers, Polym. Degrad. Stab., 49, 403, 10.1016/0141-3910(95)00137-B Assink, 2005, Use of a respirometer to measure oxidation rates of polymeric materials at ambient temperatures, Polymer, 46, 11648, 10.1016/j.polymer.2005.09.069 Gillen, 1987, Modulus profiling of polymers, Polym. Degrad. Stab., 17, 31, 10.1016/0141-3910(87)90046-2 Petrovic, 1986, Reliability of methods for determination of kinetic parameters from thermogravimetry and DSC measurements, J. Appl. Polym. Sci., 32, 4353, 10.1002/app.1986.070320406 Budrugeac, 2005, The application of the thermogravimetric analysis (TGA) and of the differential thermal analysis (DTA) for rapid thermal endurance testing of electrical insulating materials, An Univ Bucuresti Chimie, I-II, 241 Celina, 2013, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polym. Degrad. Stab., 98, 2419, 10.1016/j.polymdegradstab.2013.06.024 Celina, 2013, A perspective on the inherent oxidation sensitivity of epoxy materials, Polymer, 54, 3290, 10.1016/j.polymer.2013.04.042 Celina, M.C., Unpublished data for unfilled black EPDM material. Gillen, 2015, Challenges of accelerated aging techniques for elastomer lifetime predictions, Rubber Chem. Technol., 88, 1, 10.5254/rct.14.85930 Celina, 2005, Oxygen permeability measurements on elastomers at temperatures up to 225 °C, Macromolecules, 38, 2754, 10.1021/ma0487913 Pasternak, 1970, Diffusion and permeation of oxygen, nitrogen, carbon dioxide, and nitrogen dioxide through polytetrafluoroethylene, Macromolecules, 3, 366, 10.1021/ma60015a020 Gillen, 1992, Rigorous experimental confirmation of a theoretical model for diffusion-limited oxidation, Polymer, 33, 4358, 10.1016/0032-3861(92)90280-A Gillen, 1995, General solution for the basic autoxidation scheme, Polym. Degrad. Stab., 47, 149, 10.1016/0141-3910(94)00105-H Clough, 1992, Oxygen diffusion effects in thermally aged elastomers, Polym. Degrad. Stab., 38, 47, 10.1016/0141-3910(92)90022-W Gavara, 1994, The effect of water on the transport of oxygen through nylon-6 films, J. Polym. Sci. Part B Polym. Phys., 32, 2375, 10.1002/polb.1994.090321408 Hu, 2005, Effect of water sorption on oxygen-barrier properties of aromatic polyamides, J. Polym. Sci. Part B Polym. Phys., 43, 1365, 10.1002/polb.20425 Auras, 2004, Effect of water on the oxygen barrier properties of poly(ethylene terephthalate) and polylactide films, J. Appl. Polym. Sci., 92, 1790, 10.1002/app.20148 Henry, 1992, The kinetics of polyolefin oxidation in aqueous media, J. Polym. Sci. Part A Polym. Chem., 30, 1693, 10.1002/pola.1992.080300822