Anion exchange membranes for alkaline fuel cells: A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Alleau, 2001, Fuel cells: from their characteristics to their application fields, Actualité chimique, 48
U. Bossell, The Birth of the Fuel Cell 1835–1845, European Fuel Cell Forum 2000.
Grimes, 2000, Historical pathways for fuel cells, IEEE Aerospace and Electronic Systems Magazine, 15, 1, 10.1109/62.891972
Grove, 1839, On voltaic series and the combination of gases by platinum, Philosophical Magazine and Journal of Science, 14, 127
Grove, 1839, On a small voltaic battery of great energy; some observations on voltaic combinations and forms of arrangement; and on the inactivity of a copper positive electrode in nitro-sulphuric acid, Philosophical Magazine, 15, 287
J. Reid, Gas-Battery, US 757637, USA, 1905.
J.H. Reid, Process of Generating Electricity, US 736016, USA, 1903.
P.C.L. Noel, PCL US 350111, USA, 1904.
Kordesch, 1963, Low temperature hydrogen–oxygen fuel cells, Chemical Technology (Will Mitchell, Jr., editor, Academic), 1, 329
Kordesch, 1999, Intermittent use of a low-cost alkaline fuel cell-hybrid system for electric vehicles, Journal of Power Sources, 80, 190, 10.1016/S0378-7753(98)00261-4
Litz, 1965, Technology of hydrogen–oxygen carbon electrode fuel cells, Advances in Chemistry Series, 47, 166, 10.1021/ba-1965-0047.ch013
Kordesch, 1971, Hydrogen–air/lead battery hybrid system for vehicle propulsion, Journal of the Electrochemical Society, 118, 812, 10.1149/1.2408171
Kordesch, 1972, Outlook for alkaline fuel cell batteries, Electrocatalysis Fuel Cells, 157
Kordesch, 1974, Alkaline manganese dioxide zinc batteries, Batteries, 1, 241
Kordesch, 1975
Kordesch, 1978
Gülzow, 1996, Alkaline fuel cells: a critical view, Journal of Power Sources, 61, 99, 10.1016/S0378-7753(96)02344-0
Gülzow, 2004, Long-term operation of AFC electrodes with CO2 containing gases, Journal of Power Sources, 127, 243, 10.1016/j.jpowsour.2003.09.020
McLean, 2002, An assessment of alkaline fuel cell technology, International Journal of Hydrogen Energy, 27, 507, 10.1016/S0360-3199(01)00181-1
Gouérec, 2004, The evolution of the performance of alkaline fuel cells with circulating electrolyte, Journal of Power Sources, 129, 193, 10.1016/j.jpowsour.2003.11.032
Schulze, 2004, Degradation of nickel anodes in alkaline fuel cells, Journal of Power Sources, 127, 252, 10.1016/j.jpowsour.2003.09.021
Larminie, 2002
Cheng, 2007, A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation, Journal of Power Sources, 165, 739, 10.1016/j.jpowsour.2006.12.012
Agel, 2001, Characterization and use of anionic membranes for alkaline fuel cells, Journal of Power Sources, 101, 267, 10.1016/S0378-7753(01)00759-5
Akrour, 2005
Xu, 2005, Fundamental studies of a new series of anion exchange membranes: membrane prepared from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and triethylamine, Journal of Membrane Science, 249, 183, 10.1016/j.memsci.2004.10.010
Yamanaka, 2009, Water transport during ion conduction in anion-exchange and cation-exchange membranes, Journal of the Electrochemical Society, 156, B831, 10.1149/1.3129618
Grew, 2010, A dusty fluid model for predicting hydroxyl anion conductivity in alkaline anion exchange membranes, Journal of the Electrochemical Society, 157, B327, 10.1149/1.3273200
Hibbs, 2008, Transport properties of hydroxide and proton conducting membranes, Chemistry of Materials, 20, 2566, 10.1021/cm703263n
D. Valade, Synthese de copolymeres fluores porteurs de groupementbs ammonium pour liants d’electrode de piles a combustivles alcalines a coeur solide. PhD thesis, University of Montpellier II (France), 2009.
Kreuer, 2004, Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology, Chemical Reviews, 104, 4637, 10.1021/cr020715f
Kreuer, 1996, Proton conductivity: materials and applications, Chemistry of Materials, 8, 610, 10.1021/cm950192a
Weber, 2004, Transport in polymer-electrolyte membranes. III. Model validation in a simple fuel-cell model, Journal of the Electrochemical Society, 151, A326, 10.1149/1.1639158
Weber, 2004, Transport in polymer-electrolyte membranes. II. Mathematical model, Journal of the Electrochemical Society, 151, A311, 10.1149/1.1639157
Grew, 2010, A dusty fluid model for predicting hydroxyl anion conductivity in alkaline anion exchange membranes, Journal of the Electrochemical Society, 157, B327, 10.1149/1.3273200
Eg, G. Services, L. National Energy Technology, Fuel cell handbook [electronic resource], EG&G Technical Services, Inc, U.S. Dept. of Energy, Office of Fossil Energy, National Energy Technology Laboratory, Morgantown, 2004.
F. Barbir, PEM Fuel Cells Theory and Practice, MA, 2005.
Dominik, 2006, Proton transfer 200 years after von Grotthuss: insights from ab initio simulations 13, ChemPhysChem, 7, 1848, 10.1002/cphc.200600128
Paddison, 2002, The nature of proton transport in fully hydrated Nafion[registered sign], Physical Chemistry Chemical Physics, 4, 1158, 10.1039/b109792j
Choi, 2005, Thermodynamics and proton transport in Nafion, Journal of the Electrochemical Society, 152, E84, 10.1149/1.1855872
Tuckerman, 2002, The nature and transport mechanism of hydrated hydroxide ions in aqueous solution, Nature, 417, 925, 10.1038/nature00797
Agmon, 2000, Mechanism of hydroxide mobility, Chemical Physics Letters, 319, 247, 10.1016/S0009-2614(00)00136-6
Fujimoto, 2005, Ionomeric poly(phenylene) prepared by Diels–Alder polymerization: synthesis and physical properties of a novel polyelectrolyte, Macromolecules, 38, 5010, 10.1021/ma0482720
Kreuer, 2001, On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells, Journal of Membrane Science, 185, 29, 10.1016/S0376-7388(00)00632-3
Vanysek, 2002, Ionic conductivity and diffusion at infinite dilution
Asthagiri, 2004, Hydration and mobility of HO-(aq), Proceedings of the National Academy of Sciences of the United States of America, 101, 7229, 10.1073/pnas.0401696101
Tuckerman, 1995, Ab initio molecular dynamics simulation of the solvation and transport of H3O+ and OH− ions in water, Journal of Physical Chemistry, 99, 5749, 10.1021/j100016a003
Tuckerman, 1995, Ab initio molecular dynamics simulation of the solvation and transport of hydronium and hydroxyl ions in water, The Journal of Chemical Physics, 103, 150, 10.1063/1.469654
D.J. Pickett, Electrochemical Reactor Design, Elsevier, Amsterdam, 1979.
Hiroyuki, 2008, Anion exchange membrane and ionomer for alkaline membrane fuel cells (AMFCs), ECS Transactions, 16, 257, 10.1149/1.2981860
Li, 2010, Measurements of water uptake and transport properties in anion-exchange membranes, International Journal of Hydrogen Energy, 35, 5656, 10.1016/j.ijhydene.2010.03.026
Stoica, 2007, Anionic membrane based on polyepichlorhydrin matrix for alkaline fuel cell: synthesis, physical and electrochemical properties, Electrochimica Acta, 53, 1596, 10.1016/j.electacta.2007.03.034
Slade, 2005, Investigations of conductivity in FEP-based radiation-grafted alkaline anion-exchange membranes, Solid State Ionics, 176, 585, 10.1016/j.ssi.2004.09.044
M. Mulder, Basic Principles of Membrane Technology, 2 ed., Springer-Verlag New York, LLC, New York, 1996.
Xu, 2010, Novel anion exchange membrane based on copolymer of methyl methacrylate, vinylbenzyl chloride and ethyl acrylate for alkaline fuel cells, Journal of Membrane Science, 354, 206, 10.1016/j.memsci.2010.02.028
Patil, 2010, Deterioration of mechanical properties: a cause for fuel cell membrane failure, Journal of Membrane Science, 356, 7, 10.1016/j.memsci.2010.02.060
Jing, 2010, High-performance alkaline polymer electrolyte for fuel cell applications, Advanced Functional Materials, 20, 312, 10.1002/adfm.200901314
Koryta, 1993
Gray, 1991
Dlugolecki, 2010, Transport limitations in ion exchange membranes at low salt concentrations, Journal of Membrane Science, 346, 163, 10.1016/j.memsci.2009.09.033
Pourcelly, 2002, Conductivity and selectivity of ion exchange membranes: structure-correlations, Desalination, 147, 359, 10.1016/S0011-9164(02)00609-4
Park, 2006, An electrical impedance spectroscopic (EIS) study on transport characteristics of ion-exchange membrane systems, Journal of Colloid and Interface Science, 300, 655, 10.1016/j.jcis.2006.04.040
Neagu, 2000, Ionic polymers. VI. Chemical stability of strong base anion exchangers in aggressive media, Polymer Degradation and Stability, 70, 463, 10.1016/S0141-3910(00)00142-7
Sata, 1996, Change of anion exchange membranes in an aqueous sodium hydroxide solution at high temperature, Journal of Membrane Science, 112, 161, 10.1016/0376-7388(95)00292-8
Zschocke, 1985, Novel ion exchange membranes based on an aromatic polyethersulfone, Journal of Membrane Science, 22, 325, 10.1016/S0376-7388(00)81290-9
Matsui, 1986, Novel anion exchange membranes having fluorocarbon backbone: preparation and stability, Journal of Applied Polymer Science, 32, 4137, 10.1002/app.1986.070320327
Bauer, 1990, Anion-exchange membranes with improved alkaline stability, Desalination, 79, 125, 10.1016/0011-9164(90)85002-R
Danks, 2002, Comparison of PVDF- and FEP-based radiation-grafted alkaline anion-exchange membranes for use in low temperature portable DMFCs, Journal of Materials Chemistry, 12, 3371, 10.1039/b208627a
Danks, 2003, Alkaline anion-exchange radiation-grafted membranes for possible electrochemical application in fuel cells, Journal of Materials Chemistry, 13, 712, 10.1039/b212164f
Hinksman, 2000, Environmental stress cracking of poly(vinylidene fluoride) and welds in alkaline solutions, Polymer Degradation and Stability, 68, 299, 10.1016/S0141-3910(00)00015-X
Cope, 1975
Trostyanskaya, 1966, Anion exchangers onium class of compounds, Zhurnal Prikladnoi Khimii, 39, 1754
Gu, 2009, A soluble and highly conductive ionomer for high-performance hydroxide exchange membrane fuel cells, Angewandte Chemie International Edition, 48, 6499, 10.1002/anie.200806299
Ghigo, 2010, The mechanism of the Stevens and Sommelet Hauser Rearrangements. A theoretical study, Journal of Organic Chemistry, 75, 3608, 10.1021/jo100367z
Chempath, 2010, Density functional theory study of degradation of tetraalkylammonium hydroxides, Journal of Physical Chemistry C, 114, 11977, 10.1021/jp9122198
Cope, 1963, Mechanism of the Hofmann elimination reaction: an ylide intermediate in the pyrolysis of a highly branched quaternary hydroxide, Journal of the American Chemical Society, 85, 1949, 10.1021/ja00896a012
Chempath, 2008, Mechanism of tetraalkylammonium headgroup degradation in alkaline fuel cell membranes, Journal of Physical Chemistry C, 112, 3179, 10.1021/jp7115577
Chempath, 2007, Stability of cationic headgroups in alkaline anion-exchange membrane fuel cells
Einsla, 2007, Stability of cations for anion exchange membrane fuel cells, ECS Transactions, 1173, 10.1149/1.2781031
Sata, 1994, Studies on ion exchange membranes with permselectivity for specific ions in electrodialysis, Journal of Membrane Science, 93, 117, 10.1016/0376-7388(94)80001-4
Sata, 2001, Electrodialytic transport properties of anion-exchange membranes prepared from poly(vinyl alcohol), poly(N-ethyl 4-vinylpyridinium salt) and [beta]-cyclodextrin, Journal of Membrane Science, 181, 167, 10.1016/S0376-7388(00)00507-X
Sata, 2002, Effect of hydrophobicity of ion exchange groups of anion exchange membranes on permselectivity between two anions, Journal of Physical Chemistry, 99, 12875, 10.1021/j100034a028
Sata, 1998, Preparation and properties of anion exchange membranes having pyridinium or pyridinium derivatives as anion exchange groups, Journal of Polymer Science, Part A: Polymer Chemistry, 36, 49, 10.1002/(SICI)1099-0518(19980115)36:1<49::AID-POLA8>3.0.CO;2-X
Komkova, 2004, Anion-exchange membranes containing diamines: preparation and stability in alkaline solution, Journal of Membrane Science, 244, 25, 10.1016/j.memsci.2004.06.026
Vega, 2010, Effect of hydroxide and carbonate alkaline media on anion exchange membranes, Journal of Power Sources, 195, 7176, 10.1016/j.jpowsour.2010.05.030
Vega, 2010, Effect of CO2, HCO3− and CO2− on oxygen reduction in anion exchange membrane fuel cells, Electrochimica Acta, 55, 1638, 10.1016/j.electacta.2009.10.041
Adams, 2008, A carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell, ChemSusChem, 1, 79, 10.1002/cssc.200700013
Shin, 2010, Determination of carbonate ion in MEA during the alkaline membrane fuel cell (AMFC) operation, ECS Transactions, 33, 1837, 10.1149/1.3484674
Fenton, 1973, Complexes of alkali metal ions with poly(ethylene oxide), Polymer, 14, 589, 10.1016/0032-3861(73)90146-8
Armand, 1979, Polyethers as solid electrolytes, 131
Appetecchi, 2004, Investigation of swelling phenomena in PEO-based polymer electrolytes. II. Chemical and electrochemical characterization, Solid State Ionics, 170, 63, 10.1016/j.ssi.2003.12.019
Appetecchi, 2001, Electrochemical testing of industrially produced PEO-based polymer electrolytes, Journal of Power Sources, 101, 42, 10.1016/S0378-7753(01)00656-5
Appetecchi, 2003, Hot-pressed, dry, composite, PEO-based electrolyte membranes. I. Ionic conductivity characterization, Journal of Power Sources, 114, 105, 10.1016/S0378-7753(02)00543-8
Appetecchi, 2000, Transport and interfacial properties of composite polymer electrolytes, Electrochimica Acta, 45, 1481, 10.1016/S0013-4686(99)00363-1
Armand, 1979, Fast ion transport in solids, Electrodes and Electrolytes, 131
Minier, 1984, Thermal analysis and NMR study of a poly(ethylene oxide) complex electrolyte: PEO(LiCF3SO3)x, J. Phys. France, 45, 739, 10.1051/jphys:01984004504073900
Druger, 1985, Generalized hopping model for frequency-dependent transport in a dynamically disordered medium, with applications to polymer solid electrolytes, Physical Review B, 31, 3939, 10.1103/PhysRevB.31.3939
Chandrasekhar, 1998, Polymer solid electrolytes: synthesis and structure
Fauvarque, 1995, Alkaline poly(ethylene oxide) solid polymer electrolytes. Application to nickel secondary batteries, Electrochimica Acta, 40, 2449, 10.1016/0013-4686(95)00212-W
Vassal, 1999, Nickel/metal hydride secondary batteries using an alkaline solid polymer electrolyte, Journal of The Electrochemical Society, 146, 20, 10.1149/1.1391558
Guinot, 1998, A new class of PEO-based SPEs: structure, conductivity and application to alkaline secondary batteries, Electrochimica Acta, 43, 1163, 10.1016/S0013-4686(97)10015-9
Fauvarque, 1996
Salmon, 1997, Structural characterization of new poly(ethylene oxide)-based alkaline solid polymer electrolytes, Journal of Applied Polymer Science, 65, 601, 10.1002/(SICI)1097-4628(19970718)65:3<601::AID-APP20>3.0.CO;2-Y
Vassal, 2000, Electrochemical properties of an alkaline solid polymer electrolyte based on P(ECH-co-EO), Electrochimica Acta, 45, 1527, 10.1016/S0013-4686(99)00369-2
Mohamad, 2002, Studies of alkaline solid polymer electrolyte and mechanically alloyed polycrystalline Mg2Ni for use in nickel metal hydride batteries, Journal of Alloys and Compounds, 337, 208, 10.1016/S0925-8388(01)01916-8
Mohamad, 2003, Ionic conductivity studies of poly(vinyl alcohol) alkaline solid polymer electrolyte and its use in nickel–zinc cells, Solid State Ionics, 156, 171, 10.1016/S0167-2738(02)00617-3
Palacios, 2003, Thermal and transport properties of the polymer electrolyte based on poly(vinyl alcohol)–KOH–H2O, Electrochimica Acta, 48, 2195, 10.1016/S0013-4686(03)00204-4
Vargas, 2004, Effect of water vapor on the ion transport in polymer films of PVOH/LiH2PO4/H2O, Solid State Ionics, 175, 729, 10.1016/j.ssi.2003.10.022
Yang, 2005, All solid-state electric double-layer capacitors based on alkaline polyvinyl alcohol polymer electrolytes, Journal of Power Sources, 152, 303, 10.1016/j.jpowsour.2005.03.004
Sang, 2008, Influences of doping approach on conductivity of composite alkaline solid polymer electrolyte PVA–HA–KOH–H2O, Electrochimica Acta, 53, 5065, 10.1016/j.electacta.2007.11.033
Lewandowski, 2000, Novel poly(vinyl alcohol)–KOH–H2O alkaline polymer electrolyte, Solid State Ionics, 133, 265, 10.1016/S0167-2738(00)00733-5
Yang, 2002, Preparation of composite alkaline polymer electrolyte, Materials Letters, 57, 873, 10.1016/S0167-577X(02)00888-1
Yang, 2003, Synthesis and characterization of alkaline polyvinyl alcohol and poly(epichlorohydrin) blend polymer electrolytes and performance in electrochemical cells, Journal of Power Sources, 122, 210, 10.1016/S0378-7753(03)00429-4
Yang, 2005, Study of ionic transport properties of alkaline poly(vinyl) alcohol-based polymer electrolytes, Materials Chemistry and Physics, 92, 251, 10.1016/j.matchemphys.2005.01.022
Wu, 2006, Preparation and characterization of PVA/PAA membranes for solid polymer electrolytes, Journal of Membrane Science, 275, 127, 10.1016/j.memsci.2005.09.012
Yang, 2002, Polymer Ni–MH battery based on PEO–PVA–KOH polymer electrolyte, Journal of Power Sources, 109, 22, 10.1016/S0378-7753(02)00038-1
Yang, 2002, Alkaline composite PEO–PVA–glass-fibre-mat polymer electrolyte for Zn–air battery, Journal of Power Sources, 112, 497, 10.1016/S0378-7753(02)00438-X
Barbara, 2001, Diffusional properties of chitosan hydrogel membranes, Journal of Chemical Technology & Biotechnology, 76, 636, 10.1002/jctb.429
Jin Hong, 1992, Properties and swelling characteristics of cross-linked poly(vinyl alcohol)/chitosan blend membrane, Journal of Applied Polymer Science, 45, 1711, 10.1002/app.1992.070451004
Zawodzinski, 1993, Water uptake by and transport through Nafion® 117 membranes, Journal of the Electrochemical Society, 140, 1041, 10.1149/1.2056194
Wu, 1992, Journal of Polymer Science, Part A: Polymer Chemistry, 30, 2187, 10.1002/pola.1992.080301005
Davankov, 1974, Macronet isoporous gels through crosslinking of dissolved polystyrene, Journal of Polymer Science, Part C: Polymer Symposia, 95
Ying, 2003, Ionic conductivity and related properties of crosslinked chitosan membranes, Journal of Applied Polymer Science, 89, 306, 10.1002/app.12090
Wan, 2006, Preliminary evaluation of an alkaline chitosan-based membrane fuel cell, Journal of Power Sources, 162, 105, 10.1016/j.jpowsour.2006.07.027
Ying, 2005, New solid polymer electrolyte membranes for alkaline fuel cells, Polymer International, 54, 5, 10.1002/pi.1717
Hou, 2008, Alkali doped polybenzimidazole membrane for alkaline direct methanol fuel cell, International Journal of Hydrogen Energy, 33, 7172
Hou, 2008, Alkali doped polybenzimidazole membrane for high performance alkaline direct ethanol fuel cell, Journal of Power Sources, 182, 95, 10.1016/j.jpowsour.2008.04.010
Leykin, 2009, Ethanol crossover through alkali-doped polybenzimidazole membrane, Journal of Membrane Science, 328, 86, 10.1016/j.memsci.2008.11.047
Modestov, 2009, MEA for alkaline direct ethanol fuel cell with alkali doped PBI membrane and non-platinum electrodes, Journal of Power Sources, 188, 502, 10.1016/j.jpowsour.2008.11.118
Xing, 2000, Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI), Electrochemistry Communications, 2, 697, 10.1016/S1388-2481(00)00107-7
Zhang, 2005, Synthesis and characterizations of anion exchange organic–inorganic hybrid materials based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), Journal of Solid State Chemistry, 178, 2292, 10.1016/j.jssc.2005.05.007
Zhang, 2006, Synthesis and characterizations of novel, positively charged hybrid membranes from poly(2,6-dimethyl-1,4-phenylene oxide), Journal of Membrane Science, 269, 142, 10.1016/j.memsci.2005.06.029
Wu, 2005, Synthesis and characterizations of novel, positively charged poly(methyl acrylate)–SiO2 nanocomposites, European Polymer Journal, 41, 1901, 10.1016/j.eurpolymj.2005.02.031
Xu, 2005, Ion exchange membranes: state of their development and perspective, Journal of Membrane Science, 263, 1, 10.1016/j.memsci.2005.05.002
Kickelbick, 2003, Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale, Progress in Polymer Science, 28, 83, 10.1016/S0079-6700(02)00019-9
Wu, 2008, Free-standing anion-exchange PEO–SiO2 hybrid membranes, Journal of Membrane Science, 307, 28, 10.1016/j.memsci.2007.07.043
Wu, 2010, PVA-silica anion-exchange hybrid membranes prepared through a copolymer crosslinking agent, Journal of Membrane Science, 350, 322, 10.1016/j.memsci.2010.01.007
Yonghui, 2006, New anion exchanger organic–inorganic hybrid materials and membranes from a copolymer of glycidylmethacrylate and gamma-methacryloxypropyl trimethoxy silane, Journal of Applied Polymer Science, 102, 3580, 10.1002/app.24872
Cuiming, 2008, Novel anion-exchange organic–inorganic hybrid membranes prepared through sol–gel reaction and UV/thermal curing, Journal of Applied Polymer Science, 107, 1865, 10.1002/app.27304
Wu, 2008, Novel anion-exchange organic–inorganic hybrid membranes: preparation and characterizations for potential use in fuel cells, Journal of Membrane Science, 321, 299, 10.1016/j.memsci.2008.05.003
Wu, 2008, Preparation of alkaline solid polymer electrolyte based on PVA–TiO2–KOH–H2O and its performance in Zn–Ni battery, Journal of Physics and Chemistry of Solids, 69, 2691, 10.1016/j.jpcs.2008.06.132
Yang, 2007, Synthesis and characterization of the cross-linked PVA/TiO2 composite polymer membrane for alkaline DMFC, Journal of Membrane Science, 288, 51, 10.1016/j.memsci.2006.10.048
Yang, 2006, Study of alkaline nanocomposite polymer electrolytes based on PVA–ZrO2–KOH, Materials Science and Engineering B, 131, 256, 10.1016/j.mseb.2006.04.036
Wu, 2009, Novel silica/poly(2,6-dimethyl-1,4-phenylene oxide) hybrid anion-exchange membranes for alkaline fuel cells: effect of heat treatment, Journal of Membrane Science, 338, 51, 10.1016/j.memsci.2009.04.012
Wu, 2010, Novel silica/poly(2,6-dimethyl-1,4-phenylene oxide) hybrid anion-exchange membranes for alkaline fuel cells: effect of silica content and the single cell performance, Journal of Power Sources, 195, 3069, 10.1016/j.jpowsour.2009.11.118
Luo, 2010, Quaternized poly(methyl methacrylate-co-butyl acrylate-co-vinylbenzyl chloride) membrane for alkaline fuel cells, Journal of Power Sources, 195, 3765, 10.1016/j.jpowsour.2009.12.106
Gohil, 2004, Comparative studies on electrochemical characterization of homogeneous and heterogeneous type of ion-exchange membranes, Journal of Membrane Science, 240, 211, 10.1016/j.memsci.2004.04.022
Sperling, 1981
Stachera, 2001, Tuning the acid recovery performance of poly(4-vinylpyridine)-filled membranes by the introduction of hydrophobic groups, Journal of Membrane Science, 187, 213, 10.1016/S0376-7388(01)00349-0
Toshikatsu, 1998, Preparation and properties of anion exchange membranes having pyridinium or pyridinium derivatives as anion exchange groups, Journal of Polymer Science, Part A: Polymer Chemistry, 36, 49, 10.1002/(SICI)1099-0518(19980115)36:1<49::AID-POLA8>3.0.CO;2-X
Lebrun, 2002, Elaboration of ion-exchange membranes with semi-interpenetrating polymer networks containing poly(vinyl alcohol) as polymer matrix, Journal of Applied Polymer Science, 84, 1572, 10.1002/app.10420
Lebrun, 2004, Elaboration of a new anion-exchange membrane with semi-interpenetrating polymer networks and characterisation, Electrochimica Acta, 50, 985, 10.1016/j.electacta.2004.07.040
Nishimura, 2008, Preparation and characterization of anion-exchange membranes with a semi-interpenetrating network structure of poly(vinyl alcohol) and poly(allyl amine), Desalination, 233, 157, 10.1016/j.desal.2007.09.038
Kumar, 2010, Cross-linked poly(vinyl alcohol)–poly(acrylonitrile-CO-2-dimethylamino ethylmethacrylate) based anion-exchange membranes in aqueous media, Journal of Physical Chemistry B, 114, 198, 10.1021/jp9082079
P. Altmeier, Strongly alkaline anion exchange membranes and process for producing the same, US 5746917, USA, 1998.
P. Altmeier, Strongly basic anion-exchanging molded bodies and a method of manufacturing the same, US 5936004, USA, 1999.
Shahi, 1999, Studies on transport properties of surfactant immobilized anion-exchange membrane, Journal of Membrane Science, 158, 77, 10.1016/S0376-7388(99)00029-0
Huda, 1998, Thermal membrane potential across anion-exchange membranes with different benzyltrialkylammonium groups, Separation and Purification Technology, 14, 95, 10.1016/S1383-5866(98)00064-1
Sata, 1996, Permselectivity between two anions in anion exchange membranes crosslinked with various diamines in electrodialysis, Journal of Polymer Science, Part A: Polymer Chemistry, 34, 1475, 10.1002/(SICI)1099-0518(199606)34:8<1475::AID-POLA11>3.0.CO;2-5
Tomoi, 1997, Synthesis and thermal stability of novel anion exchange resins with spacer chains, Journal of Applied Polymer Science, 64, 1161, 10.1002/(SICI)1097-4628(19970509)64:6<1161::AID-APP16>3.0.CO;2-Z
Pandey, 2001, Formation of pore-filled ion-exchange membranes with in situ crosslinking: poly(vinylbenzyl ammonium salt)-filled membranes, Journal of Polymer Science, Part A: Polymer Chemistry, 39, 807, 10.1002/1099-0518(20010315)39:6<807::AID-POLA1054>3.0.CO;2-2
Pandey, 2003, Formation and characterization of highly crosslinked anion-exchange membranes, Journal of Membrane Science, 217, 117, 10.1016/S0376-7388(03)00084-X
Varcoe, 2006, An alkaline polymer electrochemical interface: a breakthrough in application of alkaline anion-exchange membranes in fuel cells, Chemical Communications, 1428, 10.1039/b600838k
Ge, 1989, Preparation of IM-2 homogeneous strongly basic anion exchange membrane and its application in desalination of brackish water, Journal of Membrane Science, 9, 26
Clark, 2009, A ring-opening metathesis polymerization route to alkaline anion exchange membranes: development of hydroxide-conducting thin films from an ammonium-functionalized monomer, Journal of the American Chemical Society, 131, 12888, 10.1021/ja905242r
Robertson, 2010, Tunable high performance cross-linked alkaline anion exchange membranes for fuel cell applications, Journal of the American Chemical Society, 132, 3400, 10.1021/ja908638d
Kostalik, 2010, Solvent processable tetraalkylammonium-functionalized polyethylene for use as an alkaline anion exchange membrane, Macromolecules, 43, 7147, 10.1021/ma101172a
K. Haagen, F. Helfferich, Ion exchange membrane, Ger. Patent 971,729, Germany, 1961.
Hibbs, 2009, Synthesis and characterization of poly(phenylene)-based anion exchange membranes for alkaline fuel cells, Macromolecules, 42, 8316, 10.1021/ma901538c
Valade, 2009, Synthesis and modification of alternating copolymers based on vinyl ethers, chlorotrifluoroethylene, and hexafluoropropylene, Macromolecules, 42, 7689, 10.1021/ma900860u
Kyeong-Ho, 2004, Preparation and characterization of UV-grafted ion-exchange textiles in continuous electrodeionization, Journal of Chemical Technology & Biotechnology, 79, 1395, 10.1002/jctb.1141
Kolhe, 2005, Preparation of strong base anion exchange membrane using 60Co gamma radiation, Radiation Physics and Chemistry, 74, 384, 10.1016/j.radphyschem.2004.09.020
Choi, 2003, Preparation and characterization of LDPE/polyvinylbenzyl trimethyl ammonium salts anion-exchange membrane, Journal of Membrane Science, 221, 219, 10.1016/S0376-7388(03)00265-5
Tzanetakis, 2005, Radiation-grafted PVDF anion exchange membrane for salt splitting, Desalination, 174, 257, 10.1016/j.desal.2004.09.015
Bror, 1996, Electron-beam graft-modified membranes with externally controlled flux, Polymers for Advanced Technologies, 7, 839, 10.1002/(SICI)1099-1581(199611)7:11<839::AID-PAT592>3.0.CO;2-T
Elmidaoui, 1992, Preparation of perfluorinated ion exchange membranes and their application in acid recovery, Journal of Membrane Science, 67, 263, 10.1016/0376-7388(92)80029-J
Poynton, 2010, Novel electrolyte membranes and non-Pt catalysts for low temperature fuel cells, Solid State Ionic, 181, 219, 10.1016/j.ssi.2009.01.019
Varcoe, 2006, An electron-beam-grafted ETFE alkaline anion-exchange membrane in metal-cation-free solid-state alkaline fuel cells, Electrochemistry Communications, 8, 839, 10.1016/j.elecom.2006.03.027
Varcoe, 2007, Poly(ethylene-co-tetrafluoroethylene)-derived radiation-grafted anion-exchange membrane with properties specifically tailored for application in metal-cation-free alkaline polymer electrolyte fuel cells, Chemistry of Materials, 19, 2686, 10.1021/cm062407u
Herman, 2003, The radiation-grafting of vinylbenzyl chloride onto poly(hexafluoropropylene-co-tetrafluoroethylene) films with subsequent conversion to alkaline anion-exchange membranes: optimisation of the experimental conditions and characterisation, Journal of Membrane Science, 218, 147, 10.1016/S0376-7388(03)00167-4
Varcoe, 2006, Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes, Journal of Physical Chemistry B, 110, 21041, 10.1021/jp064898b
Cohen, 1986, Proton leakage through perfluorinated anion exchange membranes, Journal of Electroanalytical Chemistry, 210, 329, 10.1016/0022-0728(86)80587-3
Varcoe, 2007, Investigations of the ex situ ionic conductivities at 30°C of metal-cation-free quaternary ammonium alkaline anion-exchange membranes in static atmospheres of different relative humidities, Physical Chemistry Chemical Physics, 9, 1479, 10.1039/B615478F
T. Momose, K. Tomiie, H. Harada, H. Miyachi, H. Kato, Method for preparation of graft polymeric membranes, US 4605685, USA, 1986.
Ennajdaoui, 2010, Membranes produced by plasma enhanced chemical vapor deposition technique for low temperature fuel cell applications, Journal of Power Sources, 195, 232, 10.1016/j.jpowsour.2009.06.090
Schieda, 2006, Plasma-polymerized thin films as new membranes for miniature solid alkaline fuel cells, Desalination, 199, 286, 10.1016/j.desal.2006.03.070
Matsuoka, 2008, Preparation of anion-exchange membrane by plasma polymerization and its use in alkaline fuel cells, Thin Solid Films, 516, 3309, 10.1016/j.tsf.2007.09.032
Nagarale, 2006, Recent developments on ion-exchange membranes and electro-membrane processes, Advances in Colloid and Interface Science, 119, 97, 10.1016/j.cis.2005.09.005
Hwang, 1997, Crosslinking of anion exchange membrane by accelerated electron radiation as a separator for the all-vanadium redox flow battery, Journal of Membrane Science, 132, 55, 10.1016/S0376-7388(97)00040-9
L. Galeazzi, Process for the chloromethylation of styrene-divinylbenzene copolymers, US 3997706, USA, 1976.
Toshikatsu, 1978, Modification of properties of ion-exchange membranes. IV. Change of transport properties of cation-exchange membranes by various polyelectrolytes, Journal of Polymer Science: Polymer Chemistry Edition, 16, 1063
Dragan, 2004, Ion-exchange resins. III. Functionalization-morphology correlations in the synthesis of some macroporous, strong basic anion exchangers and uranium-sorption properties evaluation, Journal of Polymer Science, Part A: Polymer Chemistry, 42, 2451, 10.1002/pola.20106
Vinodh, 2010, A novel anion exchange membrane from polystyrene (ethylene butylene) polystyrene: synthesis and characterization, Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 167, 43, 10.1016/j.mseb.2010.01.025
Zeng, 2010, Anion exchange membranes based on quaternized polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene for direct methanol alkaline fuel cells, Journal of Membrane Science, 349, 237, 10.1016/j.memsci.2009.11.051
Agel, 2001, The use of a solid polymer electrolyte in alkaline fuel cells, Utilisation d’electrolyte solide polymere dans les piles a combustibles alcalines, 26, 59
Stoica, 2008, Polyepichlorhydrin membranes for alkaline fuel cells: sorption and conduction properties, Journal of Physical Chemistry B, 112, 12338, 10.1021/jp804787x
Sollogoub, 2009, Formation and characterization of crosslinked membranes for alkaline fuel cells, Journal of Membrane Science, 335, 37, 10.1016/j.memsci.2009.02.027
Hong, 2010, Preparation of anion exchange membrane by amination of chlorinated polypropylene and ethylenediamine and its properties, Journal of Applied Polymer Science, 115, 2296, 10.1002/app.31344
Choi, 2005, Electrochemical characterization of poly(vinyl alcohol)/formyl methyl pyridinium (PVA-FP) anion-exchange membranes, Journal of Membrane Science, 250, 295, 10.1016/j.memsci.2004.10.034
Xiong, 2008, Preparation and characterization of cross-linked quaternized poly(vinyl alcohol) membranes for anion exchange membrane fuel cells, Journal of Membrane Science, 311, 319, 10.1016/j.memsci.2007.12.029
Zhang, 2009, Pervaporation performance of quaternized poly(vinyl alcohol) and its crosslinked membranes for the dehydration of ethanol, Journal of Membrane Science, 335, 68, 10.1016/j.memsci.2009.02.039
Wan, 2008, Quaternized-chitosan membranes for possible applications in alkaline fuel cells, Journal of Power Sources, 185, 183, 10.1016/j.jpowsour.2008.07.002
Xiong, 2008, Synthesis and characterization of cross-linked quaternized poly(vinyl alcohol)/chitosan composite anion exchange membranes for fuel cells, Journal of Power Sources, 183, 447, 10.1016/j.jpowsour.2008.06.004
Brylev, 2003, New family of anion conducting polymers: synthesis and characterization, Electrochimica Acta, 48, 1953, 10.1016/S0013-4686(03)00172-5
Lin, 2010, Cross-linked alkaline ionic liquid-based polymer electrolytes for alkaline fuel cell applications, Chemistry of Materials, 22, 6718, 10.1021/cm102957g
Dal-Cin, 1994, Polysulfone membranes. V. Poly(phenyl sulfone) (Radel R)-poly(vinyl pyrrolidone) membranes, Journal of Applied Polymer Science, 54, 783, 10.1002/app.1994.070540609
Ghassemi, 2008, Proton exchange membrane based on sulfonated polyethersulfone for H2/air and direct methanol fuel cells, ECS Transactions, 689, 10.1149/1.2981904
Patel, 2009, Preparation and characterization of proton conducting polysulfone grafted poly(styrene sulfonic acid) polyelectrolyte membranes, Journal of Industrial and Engineering Chemistry, 15, 299, 10.1016/j.jiec.2008.12.011
Rafe, 2009, Water and hexane permeate flux through UF polysulfone amide membrane, Desalination, 236, 39, 10.1016/j.desal.2007.10.048
Hao, 1991, The preparation of quaternized polysulfone membrane for low pressure reverse osmosis, Desalination, 83, 361, 10.1016/0011-9164(91)85109-8
Hao, 1991, Preparation of quaternized polysulfone membrane for low pressure reverse osmosis, Institution of Chemical Engineers Symposium Series, 361
Pan, 2010, High-performance alkaline polymer electrolyte for fuel cell applications, Advanced Functional Materials, 20, 312, 10.1002/adfm.200901314
Warshawsky, 1990, Polysulfone-based interpolymer anion exchange membrane, Journal of Membrane Science, 53, 37, 10.1016/0376-7388(90)80004-6
Y. Sugaya, I. Terada, K. Sanekata, H. Horie, Polyether-polysulfone-based anion exchangers, EP 352798, Japan, 1990.
Lu, 2008, Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts, Proceedings of the National Academy of Sciences of the United States of America, 105, 20611, 10.1073/pnas.0810041106
Park, 2007, Development of solid-state alkaline electrolytes for solid alkaline fuel cells, Macromolecular Symposia, 249–250, 174, 10.1002/masy.200750329
Park, 2008, Performance of solid alkaline fuel cells employing anion-exchange membranes, Journal of Power Sources, 178, 620, 10.1016/j.jpowsour.2007.08.043
Zhou, 2009, Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cells, Journal of Power Sources, 190, 285, 10.1016/j.jpowsour.2008.12.127
Zhou, 2010, Crosslinked, epoxy-based anion conductive membranes for alkaline membrane fuel cells, Journal of Membrane Science, 350, 286, 10.1016/j.memsci.2010.01.003
Wang, 2009, Synthesis of soluble poly(arylene ether sulfone) ionomers with pendant quaternary ammonium groups for anion exchange membranes, Macromolecules, 42, 8711, 10.1021/ma901606z
Wang, 2010, Novel hydroxide-conducting polyelectrolyte composed of an poly(arylene ether sulfone) containing pendant quaternary guanidinium groups for alkaline fuel cell applications, Macromolecules, 43, 3890, 10.1021/ma100260a
Wang, 2009, Developing a polysulfone-based alkaline anion exchange membrane for improved ionic conductivity, Journal of Membrane Science, 332, 63, 10.1016/j.memsci.2009.01.038
Li, 2005, Quaternized polyethersulfone Cardo anion exchange membranes for direct methanol alkaline fuel cells, Journal of Membrane Science, 262, 1, 10.1016/j.memsci.2005.07.009
Fang, 2006, Quaternized poly(phthalazinon ether sulfone ketone) membrane for anion exchange membrane fuel cells, Journal of Membrane Science, 285, 317, 10.1016/j.memsci.2006.08.037
Xing, 2010, Effect of amination agent on the properties of quaternized poly(phthalazinone ether sulfone) anion exchange membrane for vanadium redox flow battery application, Journal of Membrane Science, 354, 68, 10.1016/j.memsci.2010.02.064
Hao, 2000, Preparation of solvent-resistant anion-exchange membranes, Desalination, 129, 15, 10.1016/S0011-9164(00)00047-3
Chlanda, 1978
Terada, 1992, Development of anion-exchange membranes for diffusion dialysis. New ion-exchange membranes for the recovery of acids, Hyomen, 30, 133
Terada, 1991, Ion-exchange membranes for recovery of acids, Kobunshi Kako, 40, 402, 10.1295/kobunshi.40.402
Hwang, 1998, Preparation of anion exchange membrane based on block copolymers. Part II. The effect of the formation of macroreticular structure on the membrane properties, Journal of Membrane Science, 149, 163, 10.1016/S0376-7388(98)00194-X
Wandrey, 1999, Diallyldimethylammonium chloride and its polymers, Advances in Polymer Science, 125
W.T. Yao, Tsepin, Y.-m. Chang, M. Chen, Polymer-based hydroxide conducting membranes, US 6183914, USA, 2001.
Procédé de préparation de résines échangeuses d’anions, General Electric Company, FR1543904 (A), France, 1968.
W. Borman, Aromatic substituted poly(phenylene oxides), General Electric Co., US 3226361, USA, 1965.
Tongwen, 2001, Fundamental studies of a new series of anion exchange membranes: membrane preparation and characterization, Journal of Membrane Science, 190, 159, 10.1016/S0376-7388(01)00434-3
Tongwen, 2002, Fundamental studies on a new series of anion exchange membranes: effect of simultaneous amination-crosslinking processes on membranes ion-exchange capacity and dimensional stability, Journal of Membrane Science, 199, 203, 10.1016/S0376-7388(01)00698-6
Li, 2009, Fundamental studies of a new series of anion exchange membranes: membranes prepared from bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) and 4-vinylpyridine, Journal of Applied Polymer Science, 114, 3016, 10.1002/app.30943
Li, 2006, Fundamental studies of a new series of anion exchange membranes: membranes prepared from bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) and pyridine, Journal of Membrane Science, 279, 200, 10.1016/j.memsci.2005.12.006
Wu, 2006, Fundamental studies of a new series of anion exchange membranes: membranes prepared through chloroacetylation of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) followed by quaternary amination, Journal of Membrane Science, 286, 185, 10.1016/j.memsci.2006.09.035
Wu, 2008, Preparation and characterization of CPPO/BPPO blend membranes for potential application in alkaline direct methanol fuel cell, Journal of Membrane Science, 310, 577, 10.1016/j.memsci.2007.11.039
Wu, 2008, Improving anion exchange membranes for DMAFCs by inter-crosslinking CPPO/BPPO blends, Journal of Membrane Science, 322, 286, 10.1016/j.memsci.2008.06.020
Wang, 2009, Preparation of alkaline anion exchange membranes based on functional poly(ether-imide) polymers for potential fuel cell applications, Journal of Membrane Science, 326, 4, 10.1016/j.memsci.2008.09.037
Wang, 2009, Preparation of a functional poly(ether imide) membrane for potential alkaline fuel cell applications: chloromethylation, Journal of Applied Polymer Science, 112, 721, 10.1002/app.29471
Dewi, 2003, Ion-exchange and apparent diffusion coefficients within cationic polysulfonium coatings containing ferricyanide, Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 40, 37, 10.1081/MA-120016672
Dewi, 2003, Cationic polysulfonium membrane as separator in zinc–air cell, Journal of Power Sources, 115, 149, 10.1016/S0378-7753(02)00650-X
Tsuchida, 1996, Photochemical recycling of polyarylene sulfide, Chemical Communications, 2091, 10.1039/cc9960002091
Yamamoto, 1995, Synthesis of poly(sulfonium cation) by oxidative polymerization of aryl alkyl sulfides, Journal of Organic Chemistry, 60, 452, 10.1021/jo00107a027
Miyatake, 2001, Synthesis and thermal properties of a polysulfonium salt with a comb-like structure, Journal of Macromolecular Science-Pure and Applied Chemistry, 38A, 851, 10.1081/MA-100104452
Oyaizu, 2001, Polysulfonium as a new electrode-modifying polyelectrolyte, Journal of Electroanalytical Chemistry, 498, 232, 10.1016/S0022-0728(00)00383-1
Matsui, 1986
Ünlü, 2010, Hybrid polymer electrolyte fuel cells: alkaline electrodes with proton conducting membrane, Angewandte Chemie International Edition, 49, 1299, 10.1002/anie.200906021
Ünlü, 2009, Hybrid anion and proton exchange membrane fuel cells, The Journal of Physical Chemistry C, 113, 11416, 10.1021/jp903252u
www.tokuyama.co.jp, in.
www.ionicsgroup.com, in.
www.pall.com.
www.csmcri.org, in.
www.tosoh.com, in.
www.asahi-kasei.co.jp, in.
www.agc.co.jp, in.
www.mega.cz, in.
www.solvay.com, in.
en.sdtianwei.com, in.
www.nanda-chem.com, in.