Analytical simulation of pull-out tests––the direct problem

Cement and Concrete Composites - Tập 27 - Trang 93-101 - 2005
B. Banholzer1, W. Brameshuber1, W. Jung2
1Institute of Building Materials Research, Technical University of Aachen (ibac), Schinkelstraße 3, 52062 Aachen, Germany
2Institute for Pure and Applied Mathematics, Technical University of Aachen, 52062 Aachen, Germany

Tài liệu tham khảo

Bentur A, Gray RJ, Mindess S. Cracking and pull-out processes in fibre reinforced cementitious materials. In: Third International Symposium on Developments in Fibre Reinforced Cement and Concrete: Rilem Symposium FRC 86, University of Sheffield, England 13–17 July 1986, vol. 2, Vortrag 6.2. Rochdale: RILEM Technical Committee 49-TFR Potrzebowski, 1986, Behaviour of the fibre/matrix interface in SFRC during loading, 1, 455 Potrzebowski, 1986, Debonding processes between steel fibre and cement matrix, 2, 352 Banholzer B, Brameshuber W, Jung W. Analytical simulation of a pull-out test on basis of an N-piecewise linear bond law––the inverse problem. Cem Concr Compos, in preparation Desir, 1999, Steel–corrosion interface: revisiting constitutive and numerical modeling, Comput. Struct, 71, 489, 10.1016/S0045-7949(98)00308-3 Kwak, 2001, Bond–slip behavior under monotonic uniaxial loads, Eng. Struct, 23, 298, 10.1016/S0141-0296(00)00008-0 Bartos, 1981, Review paper: bond in fibre reinforced cements and concretes, Int. J. Cem. Compos, 3, 159, 10.1016/0262-5075(81)90049-X Gray, 1984, Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrix, J. Mater. Sci, 19, 861, 10.1007/BF00540456 Nammur, 1989, Bond stress model for fiber reinforced concrete based on bond stress–slip relationship, ACI Mater. J, 86, 45 Shah, 1991, Mechanical behavior of fiber-reinforced cement-based composites, J. Am. Ceram. Soc, 74, 2727, 10.1111/j.1151-2916.1991.tb06836.x Kim, 1992, Interfacial debonding and fibre pull-out stresses. Part I. Critical comparison of existing theories with experiments. Part II. A new model based on the fracture mechanics approach, J. Mater. Sci, 27, 3143, 10.1007/BF01116004 Kim, 1998 Federation internationale du beton; fib; FIP; CEB; fib Bulletin No. 10: bond of reinforcement in concrete. State-of-art report. In: fib Bulletin (2000) No. 10. Fédération du Béton, Lausanne, CH, 2000 Naaman, 1991, Fiber pull-out and bond slip. I. Analytical study. II. Experimental validation, Struct. Eng, 117, 2769, 10.1061/(ASCE)0733-9445(1991)117:9(2769) Bazant, 1994, Size effect in fiber or bar pull-out with interface softening slip, J. Eng. Mech, 120, 1945, 10.1061/(ASCE)0733-9399(1994)120:9(1945) Akatsu, 1999, Crack-bridging processes and fracture resistance of a discontinuous fiber-reinforced brittle matrix composite, J. Mater. Res, 14, 1316, 10.1557/JMR.1999.0179 Somayaji S, Shah SP. Bond stress versus slip relationship and cracking response. ACI Journal 1981 (May–June)