Analytical and Numerical Analyses of the Support System for a Large-span Tunnel in Challenging and Seismically Active Ground Conditions

Adoko, A.C., Gokceoglu, C., Yagiz, S.: Bayesian prediction of TBM penetration rate in rock mass. Eng. Geol. 226, 245–256 (2017). https://doi.org/10.1016/j.enggeo.2017.06.014

Agbay, E., Topal, T.: Evaluation of twin tunnel-induced surface ground deformation by empirical and numerical analyses (NATM part of Eurasia tunnel, Türkiye). Comput Geotech 119, 103367 (2020). https://doi.org/10.1016/j.compgeo.2019.103367

Akgün, H., Muratlı, S.W., Koçkar, M.K.: Geotechnical investigations and preliminary support design for the Geçilmez tunnel: a case study along the Black Sea coastal highway, Giresun, northern Turkey. Tunn. Undergr. Space Technol. 40, 277–299 (2014)

Aksoy, C.O., Kantarci, O., Ozacar, V.: An example of estimating rock mass deformation around an underground opening using numerical modelling. Int. J. Rock Mech. Min. Sci. 47, 272–278 (2010)

Aksoy, C.O., Onargan, T.: The role of umbrella arch and face bolt as deformation preventing support system in preventing building damages. Tunneling and Underground Space Technology 25, 553–559 (2010)

Aksoy, C.O., Ogul, K., Topal, I., Ozer, S.C., Özacar, V., Posluk, E.: Numerical modeling of non-deformable support in swelling and squeezing rock. International Journal of Rock Mechanics and Mining Science 52, 61–70 (2012)

Aksoy, C.O., Ogul, K., Topal, I., Posluk, E., Gicir, A., Kucuk, K., Uyar Aldas, G.: Reducing deformation effect of tunnel with non-deformable support system by jointed rock mass model. Tunn Underground Space Technol 40, 218–227 (2014)

Aksoy, C.O., Uyar, G.G., Posluk, E., Ogul, K., Topal, I., Kucuk, K.: Non-deformable support system application at tunnel-34 of Ankara-Istanbul high speed railway project. Structureal Eng Mechanics 58(5), 869–886 (2016). https://doi.org/10.12989/sem.2016.58.5.869

Alp, M., Apaydin, A.: Assessment of the factors affecting the advance rate of the Tunnel Gerede, the longest and one of the most problematic water transmission tunnels of Turkey. Tunn. Undergr. Space Technol 89, 157–169 (2019). https://doi.org/10.1016/j.tust.2019.04.001

Apaydin, A.: Comparison of predicted and actual states in tunnels lessons to be learned from the Gerede Water Transmission Tunnel, Türkiye. Quart J Eng Geol Hydrogeol 54(1), (2021). https://doi.org/10.1144/qjegh2020-060

Armaghani, D.J., Mohamad, E.T., Hajihassani, M., Yagiz, S., Motaghedi, H.: Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances. Eng Computers 32(2), 189–206 (2016). https://doi.org/10.1007/s00366-015-0410-5

Aydin, A., Ozbek, A., Cobanoglu, I.: Tunnelling in difficult ground: a case study from Dranaz tunnel, Sinop. Türkiye. Eng Geol 74(3–4), 293–301 (2004). https://doi.org/10.1016/j.enggeo.2004.04.003

Aygar, E.: Evaluation of new Austrian tunnelling method applied to Bolu tunnel’s weak rocks. J Rock Mechanics Geotech Eng 12, 541–556 (2020). https://doi.org/10.1016/j.jrmge.2019.12.011

Aygar, E.B., Gokceoglu, C.: Problems encountered during a railway tunnel excavation in squeezing and swelling materials and possible engineering measures: a case study from Türkiye. Sustainability 12(3), 1166 (2020). https://doi.org/10.3390/su12031166

Aygar, E.B., Gokceoglu, C.: Analytical solutions and 3D numerical analyses of a shallow tunnel excavated in weak ground: a case from Turkey. Geo-Engineering 12, 9 (2021). https://doi.org/10.1186/s40703-021-00142-7

Aygar, E.B., Gokceoglu, C.: A special support design for a large-span tunnel crossing an active fault (T9 Tunnel, Ankara-Sivas High-Speed Railway Project, Turkey). Environ Earth Sci 80(1), 37 (2021). https://doi.org/10.1007/s12665-020-09328-1

Aygar, E.B., Gokceoglu, C.: An assessment on the inner lining need for a large-span tunnel (a case from Turkey, Akyazi Tunnel, Trabzon). SN Appl Sci 3(4), 457 (2021). https://doi.org/10.1007/s42452-021-04366-1

Barton, N.: Minimizing the use of concrete in tunnels and caverns: comparing NATM and NMT. Innovative Infrastructure Solutions 2(1), 52 (2017). https://doi.org/10.1007/s41062-017-0071-x

Barton, N.R., Lien, R., Lunde, J.: Engineering classification of rock masses for the design of tunnel support. Rock Mech. 6(4), 189–239 (1974)

Bieniawski, Z.T.: Engineering classification of jointed rock masses. Trans s. Afr. Inst. Civ. Engrs 15, 335–344 (1973)

Bieniawski, Z.T.: Engineering rock mass classifications. Wiley, New York (1989)

Bilgin, N.: An appraisal of TBM performances in Turkey in difficult ground conditions and some recommendations. Tunnelling and Underground Space Technology 57, 265–276 (2016). https://doi.org/10.1016/j.tust.2016.01.038

Bilgin, N., Algan, M.: The performance of a TBM in a squeezing ground at Uluabat, Türkiye. Tunn. Undergr. Space Technol. 32, 58–65 (2012). https://doi.org/10.1016/j.tust.2012.05.004

Bilgin, N., Ates, U.: Probe drilling ahead of two tbms in difficult ground conditions in Türkiye. Rock Mech. Rock Eng. 49(7), 2763–2772 (2016). https://doi.org/10.1007/s00603-016-0937-9

Bilgin, N., Acun, S.: The effect of rock weathering and transition zones on the performance of an EPB-TBM in complex geology near Istanbul, Türkiye. Bull. Eng. Geol. Env. 80(4), 3041–3052 (2021). https://doi.org/10.1007/s10064-021-02142-4

Cao, C., Shi, C., Lei, M., Yang, W., Liu, J.: Squeezing failure of tunnels: a case study. Tunn. Undergr. Space Technol. 77, 188–203 (2018). https://doi.org/10.1016/j.tust.2018.04.007

Cao, H., Peng, L., Lei, M., Tang, Q., Peng, L., Chen, F.: Calculation model of supporting system for tunnel under shallow and weak surrounding rock considering the synergistic effects. Geotech Geol Eng 38, 1379–1388 (2020). https://doi.org/10.1007/s10706-019-01097-4

Das, R., Singh, P.K., Kainthola, A., Panthee, S.: Numerical analysis of surface subsidence in asymmetric parallel highway tunnels. J Rock Mech Geotech Eng 9(2017), 170–179 (2017)

Dalgic, S.: Tunneling in squeezing rock, the Bolu tunnel, Anatolian Motorway, Türkiye. Eng. Geol. 67, 73–96 (2002)

Dalgic, S.: Tunneling in fault zones, Tuzla tunnel, Türkiye. Tunn. Undergr. Space Technol. 18(5), 453–465 (2003). https://doi.org/10.1016/S0886-7798(03)00045-2

Eftekhari, A., Aalianvari, A.: An overview of several techniques employed to overcome squeezing in mechanized tunnels a case study. Geomech Eng 18(2), 215–224 (2019). https://doi.org/10.12989/gae.2019.18.2.215

Emre, Ö., Erkal, T., Tchepalyga, A., Kazancı, N., Keçer, M., ve Ünay, E.: Neogene-Quaternary evolution of the eastern Marmara region. Northwest Türkiye: Mineral Res Ve Exploration Bull 120, 119–145 (1998)

Farrokh, E., Rostami, J.: Effect of adverse geological condition on TBM operation in Ghomroud tunnel conveyance project. Tunn. Undergr. Space Technol. 24(4), 436–446 (2009). https://doi.org/10.1016/j.tust.2008.12.006

Hasanpour, R., Rostami, J., Thewes, M., Schmitt, J.: Parametric study of the impacts of various geological and machine parameters on thrust force requirements for operating a single shield TBM in squeezing ground. Tunn. Undergr. Space Technol. 73, 252–260 (2018). https://doi.org/10.1016/j.tust.2017.12.027

Hashash, Y.M.A., Hook, J.J., Schmidt, B., Yao, J.I.: Seismic design and analysis of underground structures. Tunneling and Underground Space Technology 16, 247–293 (2001)

Hoek, E., Brown, E.T.: Underground excavations in rock. Instn Min. Metall, London (1980)

Kargar, A.R., Rahmannejad, R., Hajabasi, M.A.: A semi-analytical elastic solution for stress field of lined non-circular tunnels at great depth using complex variable method. Int. J. Solids Struct. 51(6), 1475–1482 (2014). https://doi.org/10.1016/j.ijsolstr.2013.12.038

Kaya, A., Bulut, F.: Geotechnical studies and primary support design for a highway tunnel: a case study in Türkiye. Bull Eng Geol Envron 78(8), 6311–6334 (2019). https://doi.org/10.1007/s10064-019-01529-8

Khanbabazadeh, H., Iyisan, R.: A numerical study on the 2D behavior of the single and layered clayey basins. Bulletin of Earthquake Eng 12, 1515–1536 (2014)

Kirsch, E.G.: The theory if elasticity and the need of the strength of materials (trans.). J Assoc German Eng. 42, 797–807 (1898)

Koçkar, M.K., Akgün, H.: Methodology for tunnel and portal support design in mixed limestone, schist and phyllite conditions: a case study in Türkiye. Int. J. Rock Mech. Min. Sci. 40, 173–196 (2003)

Komu, M.P., Guney, U., Kilickaya, T.E., Gokceoglu, C.: Using 3D numerical analysis for the assessment of tunnel-landslide relationship: Bahce-Nurdag Tunnel (South of Türkiye). Geotech. Geol. Eng. 38(2), 1237–1254 (2020). https://doi.org/10.1007/s10706-019-01084-9

Kong, S.M., Choi, S.I., Shim, S.B., Lee, H., Oh, D.W., Lee, S.W.: Stability evaluation of TBM pilot tunnels to rear blasting using the protection shield. Appl. Sci. 11(4), 1759 (2021). https://doi.org/10.3390/app11041759

Lee, Y.-Z., Schubert, W.: Determination of the round length for tunnel excavation in weak rock. Tunn Underground Space Technol 23, 221–231 (2008). https://doi.org/10.1016/j.tust.2007.04.001

Li, W., Zhang, C.P., Zhu, W.J., Zhang, D.L.: Upper-bound solutions for the face stability of a non-circular NATM tunnel in clays with a linearly increasing undrained shear strength with depth. Comput. Geotech. 114, 103136 (2019). https://doi.org/10.1016/j.compgeo.2019.103136

Luo, Y., Chen, J., Chen, Y., Diao, P., Qiao, X.: Longitudinal deformation profile of a tunnel in weak rock mass by using the back analysis method. Tunnelling and Underground Space Technology 71, 478–493 (2018). https://doi.org/10.1016/j.tust.2017.10.003

Lysmer, J., Kuhlemeyer, R.L.: Finite dynamic model for infinite media. J Eng Mech 95(EM4), 859–877 (1969)

Maleki, M.R., Dehnavi, R.N.: Influence of discontinuities on the squeezing intensity in high in-situ stresses (a tunnelling case study; actual evidences and TBM release techniques). Rock Mech. Rock Eng. 51(9), 2911–2933 (2018). https://doi.org/10.1007/s00603-018-1476-3

Moussaei, N., Sharifzadeh, M., Sahriar, K., Khosravi, M.H.: A new classification of failure mechanisms at tunnels in stratified rock masses through physical and numerical modelling. Tunn. Undergr. Space Technol 91, 103017 (2019)

Niedbalski, Z., Malkowski, P., Majcherczyk, T.: Application of the NATM method in the road tunneling works in difficult geological conditions - the Carpathian flysch. Tunn. Undergr. Space Technol. 74, 41–59 (2018). https://doi.org/10.1016/j.tust.2018.01.003

Oke, J., Vlachopoulos, N., Marinos, V.: The pre-support nomenclature and support selection methodology for temporary support systems within weak rock masses. J Geotech Geological Eng 32(1), 97–130 (2014)

Ozcelik, M.: Criteria for the selection of construction method at the Ovit Mountain Tunnel (Türkiye). KSCE J. Civ. Eng. 20(4), 1323–1328 (2016). https://doi.org/10.1007/s12205-015-0055-3

Palmström, A.: Recent developments in rock support estimates by the RMi. J Rock Mech Tunnelling Technology 6(1), 1–19 (2000)

Palmström, A.: Combining the RMR, Q, and RMi classification systems. Tunn Underground Space Technol 24(4), 491–492 (2009)

Panthi, K.K., Basnet, C.B.: Evaluation of earthquake impact on magnitude of the minimum principal stress along a shotcrete lined pressure tunnel in Nepal. J Rock Mech Geotech Eng. 11, 920–934 (2019)

Sakcali, A., Yavuz, H.: Estimation of radial deformations around circular tunnels in weak rock masses through numerical modelling. Int. J. Rock Mech. Min. Sci. 123, 104092 (2019). https://doi.org/10.1016/j.ijrmms.2019.104092

Satici, O., Topal, T.: Assessment of damage zone thickness and wall convergence for tunnels excavated in strain-softening rock masses. Tunn. Undergr. Space Technol 108, 103722 (2021). https://doi.org/10.1016/j.tust.2020.103722

Song, J.S., Yoo, C.S.: Development of knowledge-based study on optimized NATM lining design system. J Korean Geosynthetic Soc 17(4), 251–265 (2018). https://doi.org/10.12814/jkgss.2018.17.4.251

Sulem, J., Panet, M., Guenot, A.: An analytical solution for time-dependent displacements in a circular tunnel. Int J Rock Mechanics, Mining Sci Geomechanics Abstracts 24, 155–164 (1987)

Swannell, N., Palmer, M., Barla, G., Barla, M.: Geotechnical risk management approach for TBM tunnelling in squeezing ground conditions. Tunn. Undergr. Space Technol. 57, 201–210 (2016). https://doi.org/10.1016/j.tust.2016.01.013

Taromi, M., Eftekhari, A., Hamidi, J.K., Aalianvari, A.: A discrepancy between observed and predicted NATM tunnel behaviors and updating: a case study of the Sabzkuh tunnel. Bull. Eng. Geol. Env. 76(2), 713–729 (2017). https://doi.org/10.1007/s10064-016-0862-x

Vlachopoulos, N., Diederichs, M.S.: Improved longitudinal displacement profiles for convergence confinement analysis of deep tunnels. Rock Mech. & Rock Eng. 42(2), 131–146 (2009)

Wang, J.-N.: Seismic design of tunnels: a state-of-the-art approach, Monograph, monograph 7. Parsons, Brinckerhoff, Quade and Douglas Inc, New York (1993)

Wang, H.N., Zeng, G.S., Jiang, M.J.: Analytical stress and displacement around non-circular tunnels in semi-infinite ground. Appl. Math. Model. 63, 303–328 (2018). https://doi.org/10.1016/j.apm.2018.06.043

Wang, X.F., Jiang, B.S., Zhang, Q., Lu, M.M., Chen, M.: Analytical solution of circular tunnel in elastic-viscoplastic rock mass. Latin American J Solids Structures 16(6), 210 (2019)

Yagiz, S., Gokceoglu, C., Sezer, E., Iplikci, S.: Application of two non-linear prediction tools to the estimation of tunnel boring machine performance. Eng. Appl. Artif. Intell. 22(4–5), 808–814 (2009). https://doi.org/10.1016/j.engappai.2009.03.007

Yildirim, C., Tuysuz, O.: Estimation of the long-term slip, surface uplift and block rotation along the northern strand of the North Anatolian Fault Zone: inferences from geomorphology of the Almacık Block. Geomorphology 297, 55–68 (2017). https://doi.org/10.1016/j.geomorph.2017.08.038

Zhang, Q., Li, C., Min, M., Jiang, B.S., Yu, L.Y.: Elastoplastic analysis of circular openings in elasto-brittle-plastic rock mass based on logarithmic strain. Math. Probl. Eng. 2017, 1–9 (2017)

Zhang, Q., Jiang, B.S., Wu, X.S., Zhang, H.Q., Han, L.J.: Elasto-plastic coupling analysis of circular openings in elasto-brittle-plastic rock mass. Theoret. Appl. Fract. Mech. 60, 60–67 (2012)

Zhang, Q., Jiang, B.S., Wang, S.L., Ge, X.R., Zhang, H.Q.: Elasto-plastic analysis of a circular opening in strain-softening rock mass. Int. J. Rock Mech. Min. Sci. 50, 38–46 (2012)

Zhang, Z.Q., Shi, X.Q., Wang, B., Li, H.Y.: Stability of NATM tunnel faces in soft surrounding rocks. Comput. Geotech. 96, 90–102 (2018). https://doi.org/10.1016/j.compgeo.2017.10.009

Zhang, Q., Zhang, C.H., Jiang, B.S., Li, N., Wang, Y.C.: Elastoplastic coupling solution of circular openings in strain-softening rock mass considering pressure-dependent effect. Int. J. Geomech. 18, 04017132 (2018)

Zou, J., Chen, G., Qian, Z.: Tunnel face stability in cohesion-frictional soils considering the soil arching effect by improved failure models. Comput. Geotech. 106, 1–17 (2019)

Barton, N., Løset, F., Lien, R. and Lunde, J. Application of the Q-system in design decisions. In subsurface space, (ed. M. Bergman) 2, 553–561. New York: Pergamon. (1980)

Bieniawski, Z.T. Rock mass classification in rock engineering. In Exploration for rock engineering, proc. of the symp., (ed. Z.T. Bieniawski) 1, 97–106. (1976) Cape Town: Balkema.

EWI and WIRKIR,. Tunneling in Moberg Formations, Orkustofnun National Energy Authority. (1972) (https://orkustofnun.is/gogn/Skyrslur/1972/OS-1972-Tunneling-Moberg-2.pdf). Accessed 1 Apr 2019

Fugro Sial.: T1 Tunnel Geological-Geotechnical Investigation Report. Fugro Sial Geosciences Consulting and Engineering Ltd. Ankara. (2019a)

Fugro Sial.: T1 Tunnel Project Report. Fugro Sial Geosciences Consulting and Engineering Ltd. Ankara. (2019b)

Grimstad, E., Barton, N. Updating the Q-System for NMT. Proc. Int. Symp. on sprayed concrete - modern use of wet mix sprayed concrete for underground support, Fagernes. 46–66. (1993) Oslo: Norwegian Concrete Assn.

Hoek, E., Practical Rock Engineering, p 341, (2007) https://www.rocscience.com/assets/resources/learning/hoek/Practical-Rock-Engineering-Full-Text.pdf

Hoek, E., Rock Support Interaction analysis for tunnels in weak rock masses, (2012) https://www.rocscience.com/documents/pdfs/rocnews/winter2012/Rock-Support-Interaction-Analysis-for-Tunnels-Hoek.pdf

Hoek, E. and Marinos, P., 2000. Predicting tunnel squeezing. Tunnels and Tunnelling International. Part 1 – November 2000, Part 2 – December 2000.

Hoek, E., Carranza-Torres, C., Diederichs, M.S., Corkum, B., Integration of geotechnical and structural design in tunnelling. In: Proceedings University of Minnesota 56th Annual Geotechnical Engineering Conference, 29 February 2008. Minneapolis, pp. 1–53. (2008) Available for downloading at Hoek’s Corner at <www.rocscience.com>.

Itasca, Flac3d User Manual, Getting Started. (2002)

Kastner, H.. Statics of tunnel and tunnel construction based on geomechanical knowledge. Second revised edition. (1971)

MTA (General Directorate of Mineral Research and Exploration), &nbsp;Geoscience map viewer and drawing editor, yerbilimleri.mta.gov.tr (2021)

Oke, J., Vlachopoulos, N., Diederichs, M.S., Improved input parameters and numerical analysis techniques for temporary support of underground excavations in weak rock. In: RockEng. Edmonton. (2012)

Oke J, Vlachopoulos N, Diederichs MS., The reduction of surface settlement by employing umbrella arch systems. In: GeoMontreal 2013a. Montreal: Canadian Geotechnical Society. (2013a)

Oke J, Vlachopoulos N, Diederichs MS., Modification of the supported longitudinal displacement profile for tunnel face convergence in weak rock. In: 47th US rock mechanics/geomechanics symposium. San Francisco: American Rock Mechanics Association. (2013)

Oke J, Vlachopoulos N, Diederichs MS., Semi-analytical model of an umbrella arch employed in hydrostatic tunnelling conditions. In: 48th US rock mechanics/ geomechanics symposium. Minneapolis: American Rock Mechanics Assoc. (2014)

O’Rourke, T.D., Guidelines for Tunnel Lining Design. ASCE Technical Committee tunn lining design Underground Technol Res Council. (1984)

O’Rourke, T.D., Goh, S.H., Menkiti, C.O., Mair, R.J., Highway tunnel performance during the 1999 Duzce earthquake. Proceedings of the Fifteenth Int Conference Soil Mech Geotech Eng, August 27_31, 2000. Istanbul, Türkiye. (2001)

Owen, G.N., Scholl, R.E., Earthquake engineering of large underground structures. Report no. FHWA_RD-80_195. Federal Highway Administration National Sci Foundation. (1981)

Penzien, J., Seismically -induced racking of tunnel linings. Int. J. Earthquake Eng. Struct. Dyn. 29, 683_691. (2000)

Rabcewicz, L.v., The New Austrian Tunn Method, Part One, Water Power, pp 453–457 (1964)

Rabcewicz, L.v., The New Austrian Tunnelling Method, Part Two, Water Power, pp 511–515 (1964b)

Rabcewicz, L.v., The New Austrian Tunnelling Method, Part Three, Water Power, pp 19–24 (1965)

Sakurai, A., Takahashi, T., Dynamic stresses of underground pipeline during earthquakes. Proceedings of the Fourth World Conference on Earthquake Engineering. (1969)

Terzaghi, K. Rock defects and loads on tunnel supports. In Rock tunneling with steel supports, (eds R. V. Proctor and T. L. White) 1, 17–99 (1946). Youngstown, OH: Commercial Shearing and Stamping Company.

Yuksel Proje, Karayolu ve Demiryolu Tünelleri ve Diğer Zemin Yapıları (Sektör: Ulaşım Tesisleri – A2) (2019)