Analytic solution for torsion of thin-walled laminated composite beams of symmetrical open cross sections with influence of shear
Tóm tắt
An approximate analytic solution for torsion of thin-walled laminated composite beams of symmetrical open cross sections with influence of shear is presented. The solution based on the classical Vlasov’s thin-walled beam theory is modified for thin-walled laminated composite beams with orthotropic and symmetrical lay-up. It is shown that the beam subjected to torsion with influence of shear, caused by couples in the cross section planes, is also subjected to bending due to shear in the plane orthogonal to the plane of symmetry. If the cross section has two axes of symmetry, the beam will be subjected only to torsion with influence of shear. The expressions for the displacements and normal stresses are derived in closed analytic form. The material influence on shear is defined by factor that depends on the fibre orientations. Simply supported and clamped beams subjected to distributed couples are considered. Illustrative examples are provided, and the results for the displacements and stresses show very good agreement between analytical ones and numerically obtained results utilizing three-dimensional shell finite elements.
Tài liệu tham khảo
Jones, R.: Mechanics of Composite Materials. Scripta Book, Washington (1975)
Kollar, L., Springer, G.: Mechanics of Composite Structures. Cambridge University Press, Cambridge (2003)
Librescu, L., Song, O.: Thin-Walled Composite Beams. Springer, Dordrecht (2006)
Vlasov, V.Z.: Thin-Walled Elastic Beams, 2nd edn. National Science Foundation, Washington (1961)
Kollbrunner, C., Basler, K.: Torsion in Structures. Springer, Berlin (1969)
Pavazza, R.: Introduction to the Analysis of Thin-Walled Structures (in Croatian). Kiegen, Zagreb (2007)
Loughlan, J., Ata, M.: The behaviour of open and closed section carbon fibre composite beams subjected to constrained torsion. Compos. Struct. 38, 631–647 (1997)
Rand, O.: Fundamental closed-form solutions for solid and thin-walled composite beams including a complete out-of-plane warping model. Int. J. Solids Struct. 35, 2775–2793 (1998)
Roberts, T., Al-Ubaidi, H.: Influence of shear deformation on restrained torsional warping of pultruded FRP bars of open cross-section. Thin Walled Struct. 39, 395–414 (2001)
Song, O., Librescu, L., Jeong, N.: Static response of thin-walled composite I-beams loaded at their free-end cross-section: analytical solution. Compos. Struct. 52, 55–65 (2001)
Jung, S., Lee, J.: Closed-form analysis of thin-walled composite I-beams considering non-classical effects. Compos. Struct. 60, 9–17 (2003)
Maddur, S., Chaturvedi, S.: Laminated composite open profile sections: first order shear deformation theory. Compos. Struct. 45, 105–114 (1999)
Lee, J., Lee, S.: Flexural-torsional behavior of thin-walled composite beams. Thin Walled Struct. 42, 1293–1305 (2004)
Kim, N.: Shear deformable doubly- and mono-symmetric composite I-beams. Int. J. Mech. Sci. 53, 31–41 (2011)
Pavazza, R.: Torsion of thin-walled beams of open cross-section with influence of shear. Int. J. Mech. Sci. 47, 1099–1122 (2005)
Pavazza, R., Matoković, A., Plazibat, B.: Torsion of thin-walled beams of symmetrical open cross-sections with influence of shear. Trans. FAMENA 37, 1–14 (2013)
Plazibat, B., Pavazza, R., Matoković, A.: An approximate analytic solution for the stresses and displacements of thin-walled orthotropic beams subjected to torsion. In: 16th European Conference on Composite Materials-ECCM16. University of Seville Press, Seville (2014)
Zhao, Z.-L., et al.: Biomechanical tactics of chiral growth in emergent aquatic macrophytes. Sci. Rep. 5, 12610 (2015). doi:10.1038/srep12610
Kaw, A.: Mechanics of Composite Materials. CRC Press, Boca Raton (1997)
ADINA: Watertown, MA 02472, USA: ADINA R&D, Inc. (2014)