Analysis on the features and potential causes of wheel surface damage for heavy-haul locomotives

Guo, 2018, Analysis of the car body stability performance after coupler jack-knifing during braking, Veh. Syst. Dyn., 56, 900, 10.1080/00423114.2017.1401099 Lv, 2018, The effect of the secondary lateral stopper on the compressed stability of the couplers and running safety of the locomotives, Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit, 232, 851, 10.1177/0954409717699040 Ling, 2016, Lateral impact derailment mechanisms, simulation and analysis, Int. J. Impact Eng., 94, 36, 10.1016/j.ijimpeng.2016.04.001 Ling, 2018, Dynamic response of the train–track–bridge system subjected to derailment impacts, Veh. Syst. Dyn., 56, 638, 10.1080/00423114.2017.1398341 Ekberg, 2014, Wheel/rail rolling contact fatigue–probe, predict, prevent, Wear, 314, 2, 10.1016/j.wear.2013.12.004 Handa, 2012, Influence of wheel/rail tangential traction force on thermal cracking of railway wheels, Wear, 289, 112, 10.1016/j.wear.2012.04.008 Caprioli, 2016, Thermal cracking of railway wheels: Towards experimental validation, Tribol. Int., 94, 409, 10.1016/j.triboint.2015.09.042 Liu, 2015, Research into the problem of wheel tread spalling caused by wheelset longitudinal vibration, Veh. Syst. Dyn., 53, 546, 10.1080/00423114.2015.1008015 Bower, 1988, The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks, J. Tribol., 110, 704, 10.1115/1.3261717 Fletcher, 2008, Modelling and full-scale trials to investigate fluid pressurisation of rolling contact fatigue cracks, Wear, 265, 1317, 10.1016/j.wear.2008.02.025 Fletcher, 2007, Investigating fluid penetration of rolling contact fatigue cracks in rails using a newly developed full-scale test facility, Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit, 221, 35, 10.1243/09544097JRRT63 Tunna, 2007, A review of wheel wear and rolling contact fatigue, Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit, 221, 271, 10.1243/0954409JRRT72 Dirks, 2016, Prediction of wheel profile wear and crack growth–comparisons with measurements, Wear, 366, 84, 10.1016/j.wear.2016.06.026 Nia, 2015, Prediction of RCF and wear evolution of iron-ore locomotive wheels, Wear, 338, 62 Stichel, 2008, Investigation of the risk for rolling contact fatigue on wheels of different passenger trains, Veh. Syst. Dyn., 46, 317, 10.1080/00423110801939188 Perez, 2006, Application of active steering systems for the reduction of rolling contact fatigue on rails, Veh. Syst. Dyn., 44, 730, 10.1080/00423110600883702 Ekberg, 2014, Identifying the root causes of damage on the wheels of heavy haul locomotives and its mitigation, Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit, 228, 663, 10.1177/0954409714526165 Molyneux-Berry, 2012, Wheel surface damage: relating the position and angle of forces to the observed damage patterns, Veh. Syst. Dyn., 50, 335, 10.1080/00423114.2012.665164 Ekberg, 2005, Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview, Wear, 258, 1288, 10.1016/j.wear.2004.03.039 Zhai, 2009, Fundamentals of vehicle–track coupled dynamics, Veh. Syst. Dyn., 47, 1349, 10.1080/00423110802621561 Liu, 2016, Establishment and verification of three-dimensional dynamic model for heavy-haul train–track coupled system, Veh. Syst. Dyn., 54, 1511, 10.1080/00423114.2016.1213862 Ekberg, 2002, An engineering model for prediction of rolling contact fatigue of railway wheels, Fatigue Fract. Eng. Mater. Struct., 25, 899, 10.1046/j.1460-2695.2002.00535.x Tunna, 2007 Burstow, 2007 Hossein-Nia, 2018, Wheel life prediction model–an alternative to the FASTSIM algorithm for RCF, Veh. Syst. Dyn., 56, 1051, 10.1080/00423114.2017.1403636