Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)

Carasek, 2018, Study and evaluation of construction and demolition waste recycled aggregates for masonry and rendering mortars, Ceramica, 64, 288, 10.1590/0366-69132018643702244 Moraes, 2018, Evaluation of mechanical properties of cement compounds with microcrystalline cellulose, Materia, 23 Bourtsalas, 2018, Use of non-recycled plastics and paper as alternative fuel in cement production, J Clean Prod, 181, 8, 10.1016/j.jclepro.2018.01.214 Vázquez-Rowe, 2019, Production of cement in Peru: understanding carbon-related environmental impacts and their policy implications, Res Conser Rec, 142, 283, 10.1016/j.resconrec.2018.12.017 Erans, 2018, Pilot testing of enhanced sorbents for calcium looping with cement production, Appl Energy, 225, 392, 10.1016/j.apenergy.2018.05.039 Abdel-Ghani, 2018, Utilization of by-pass cement kiln dust and air-cooled blast-furnace steel slag in the production of some “green” cement products, HBRC J, 14, 408, 10.1016/j.hbrcj.2017.11.001 Gao, 2016, Analysis of material flow and consumption in cement production process, J Clean Prod, 112, 553, 10.1016/j.jclepro.2015.08.054 Geng, 2019, Calculating of CO2 emission factors for Chinese cement production based on inorganic carbon and organic carbon, J Clean Prod, 217, 503, 10.1016/j.jclepro.2019.01.224 Carrasco, 2019, Experimental investigations of oxyfuel burner for cement production application, Fuel, 236, 608, 10.1016/j.fuel.2018.08.135 Zhang, 2018, Accounting process-related CO2 emissions from global cement production under Shared Socioeconomic Pathways, J Clean Prod, 184, 451, 10.1016/j.jclepro.2018.02.284 Yin, 2018, Environmental perspectives of recycling various combustion ashes in cement production – A review, Waste Manag, 78, 401, 10.1016/j.wasman.2018.06.012 Almeida, 2015, Sugarcane bagasse ash sand (SBAS): Brazilian agroindustrial by-product for use in mortar, Constr. Build Mat, 82, 31, 10.1016/j.conbuildmat.2015.02.039 Sales, 2010, Use of Brazilian sugarcane bagasse ash in concrete as sand replacement, Waste Manag, 30, 1114, 10.1016/j.wasman.2010.01.026 Nepomuceno, 2018, Mix design of structural lightweight self-compacting concrete incorporating coarse lightweight expanded clay aggregates, Constr Build Mat, 166, 373, 10.1016/j.conbuildmat.2018.01.161 Azevedo, 2019, Effect of granite residue incorporation on the behavior of mortars, Materials, 12, 1449, 10.3390/ma12091449 Akhtar, 2018, Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective, J Clean Prod, 186, 262, 10.1016/j.jclepro.2018.03.085 Azevedo, 2018, Influence of sintering temperature of a ceramic substrate in mortar adhesion for civil construction, J Build Eng, 19, 342, 10.1016/j.jobe.2018.05.026 Pachta, 2018, Performance of lime-based mortars at elevated temperatures, Constr Build Mat, 189, 576, 10.1016/j.conbuildmat.2018.09.027 Gomes, 2012, Evaluación de la influencia del contenido de agua en la trabajabilidad del mortero de tierra, En: Apuntes, 25, 258 Alonso, 2017, Alkali-activated mortars: workability and rheological behavior, Constr Build Mat, 145, 576, 10.1016/j.conbuildmat.2017.04.020 Estephanea, 2019, Three-dimensional shape characterization of fine sands and the influence of particle shape on the packing and workability of mortars, Cem Concr Comp, 97, 125, 10.1016/j.cemconcomp.2018.12.018 Chaidachatorn, 2019, Extended water/cement ratio law for cement mortar containing recycled asphalt pavement, Constr Build Mat, 196, 457, 10.1016/j.conbuildmat.2018.11.047 Lee, 2019, Coupling material characteristics with water–cement ratio for elastic wave based monitoring of underground structure, Tunn Undergr Space Technol, 84, 129, 10.1016/j.tust.2018.11.014 Cruz, 2019, Evaluation of the impact of the Rio 2016 Olympic Games on air quality in the city of Rio de Janeiro, Brazil, Atmos Environ, 203, 206, 10.1016/j.atmosenv.2019.02.007 Rosado, 2019, Life cycle assessment of construction and demolition waste management in a large area of São Paulo State, Brazil, Waste Manag, 85, 477, 10.1016/j.wasman.2019.01.011 Contreas, 2016, Recycling of construction and demolition waste for producing new construction material (Brazil case-study), Constr Build Mat, 123, 594, 10.1016/j.conbuildmat.2016.07.044 Lima, 2018, Evaluation of heavy metals in levels of wetland Marimbus, Bahia, Brazil, Eng Sanit Ambient, 23, 591, 10.1590/s1413-41522018164218 Quadro, 2018, Chromium contents linked to iron oxide at areas with tannery sludge disposal, Eng Sanit Ambient, 23, 63, 10.1590/s1413-41522018159157 Fernandez, 2018, Study of water treatment sludge incorporation into interlocking concrete pavers, Materia, 23 Hameed, 2019, Characteristics of polymer concrete produced from wasted construction materials, Energy Procedia, 157, 43, 10.1016/j.egypro.2018.11.162 Solis-Guzman, 2009, A Spanish model for quantification and management of construction waste, Waste Manag, 29, 2542, 10.1016/j.wasman.2009.05.009 Cochran, 2010, Estimating construction and demolition debris generation using a materials flow analysis approach, Waste Manag, 30, 2247, 10.1016/j.wasman.2010.04.008 Hsiao, 2002, Modeling materials flow of waste concrete from construction and demolition wastes in Taiwan, Resour Pol, 28, 39, 10.1016/S0301-4207(03)00004-7 Silva, 2019, Use of recycled aggregates arising from construction and demolition waste in new construction applications, J Clean Prod, 236, 145, 10.1016/j.jclepro.2019.117629 Colangelo, 2017, Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy, Compos Part B: Eng, 15, 43, 10.1016/j.compositesb.2016.10.045 Pacheco-Torgal, 2020 Ferreira, 2019, The role of powder content of the recycled aggregates of CDW in the behaviour of rendering mortars, Constr Build Mater, 208, 601, 10.1016/j.conbuildmat.2019.03.058 Jesus, 2019, Rendering mortars with incorporation of very fine aggregates from construction and demolition waste, Constr Build Mater, 229, 67, 10.1016/j.conbuildmat.2019.116844 Santos, 2018, Influence of glass residue addition on the properties of adhesive mortar, Mater Sci Forum, 930, 158, 10.4028/www.scientific.net/MSF.930.158 NBR 7181, 2016 NBR 12004, 1990 NBR 12051, 1991 NBR 6458, 2016 NBR 7211, 2009 Azevedo, 2017, Influence of incorporation of glass waste on the rheological properties of adhesive mortar, Constr Build Mat, 148, 359, 10.1016/j.conbuildmat.2017.04.208 Zanelato, 2019, Evaluation of roughcast on the adhesion mechanisms of mortars on ceramic substrates, Mater Struct, 52, 53, 10.1617/s11527-019-1353-x Marvila, 2019, Study on the replacement of the hydrated lime by kaolinitic clay in mortars, Adv Appl Ceram, 10.1080/17436753.2019.1595266 NBR 13278, 2005 NBR 13279, 2005 Chu, 2019, Effect of paste volume on fresh and hardened properties of concrete, Constr Build Mat, 218, 284, 10.1016/j.conbuildmat.2019.05.131 Tutikian, 2011, Dosing of Portland cement concretes, Concrete: Sci Technol NBR 13280, 2005 NBR 9779, 2012 CONAMA, 2012 NBR 10004, 2004 Abadou, 2016, Ceramic waste influence on dune sand mortar performance, Constr Build Mat, 125, 703, 10.1016/j.conbuildmat.2016.08.083 Papayianni, 2012, Effect of granulometry on cementitious properties of ladle furnace slag, Cem Concr Comp, 34, 400, 10.1016/j.cemconcomp.2011.11.015 Le, 2019, Durability of mortars with leftover recycled sand, Constr Build Mat, 215, 391, 10.1016/j.conbuildmat.2019.04.179 Barriguete, 2018, Analysis of the feasibility of the use of CDW as a low-environmental-impact aggregate in conglomerates, Constr Build Mat, 178, 83, 10.1016/j.conbuildmat.2018.05.011 Panizza, 2018, Assessment of geopolymers with construction and demolition waste (CDW) aggregates as a building material, Constr Build Mat, 181, 119, 10.1016/j.conbuildmat.2018.06.018 Yacoub, 2019, The effect of the drying temperature on water porosity and gas permeability of recycled sand mortar, Constr Build Mat, 214, 677, 10.1016/j.conbuildmat.2019.04.128 Abraham, 2018, Influence of RAP aggregates on strength, durability and porosity of cement mortar, Constr Build Mat, 189, 1105, 10.1016/j.conbuildmat.2018.09.069 Kim, 2019, Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics – Porosity assessment based on pore segmentation from backscattered electron image analysis, Constr Build Mat, 212, 149, 10.1016/j.conbuildmat.2019.03.265 Trujillo, 2019, Characterization of pathologies in housing structures. A case study in the city of Tuxtla Gutierrez, Chiapas, Mexico, J Build Eng, 22, 539, 10.1016/j.jobe.2019.01.014 Bauer, 2017, Analysis of fixing of coating in mortar with the use of infrared thermography Marvila, 2019, Evaluation of the use of marble waste in hydrated lime cement mortar based, J Mater Cycles Waste Manag, 22 Azevedo, 2018, Recycling paper industry effluent sludge for use in mortars: a sustainability perspective, J Clean Prod, 193, 335, 10.1016/j.jclepro.2018.05.011