Analysis of multi-layered filament-wound composite pipes under internal pressure

Akkus, 2000, Bending behaviors of thin composite pipes with reinforcing nodes, Mater Sci Res Int, 6, 131

Alderson, 1992, Failure mechanisms during the transverse loading of filament-wound pipes under static and low velocity impact conditions, Composites, 23, 167, 10.1016/0010-4361(92)90437-Y

Nishiwaki, 1995, A quasi-three-dimensional lateral compressive analysis method for a composite cylinder, Compos Struct, 32, 293, 10.1016/0263-8223(95)00029-1

Onoda, 1985, Optimal laminate configurations of cylindrical shells for axial buckling, AIAA J, 23, 1093, 10.2514/3.9042

Smerdov, 2000, A computational study in optimum formulations of optimization problems on laminated cylindrical shells for buckling: I. Shells under axial compression, Compos Sci Technol, 60, 2057, 10.1016/S0266-3538(00)00102-0

Rosenow, 1984, Wind angle effects in glass fiber-reinforced polyester filament wound pipes, Composites, 15, 144, 10.1016/0010-4361(84)90727-4

Barton, 1941, The circular cylinder with a band of uniform pressure on a finite length of the surface, J Appl Mech, 8, A97, 10.1115/1.4009114

Fu, 1992, Buckling of polar and rectilinearly orthotropic annuli under uniform internal or external pressure loading, Compos Struct, 22, 47, 10.1016/0263-8223(92)90037-D

Cho, 1998, Elastodynamic solution for the thermal shock stresses in an orthotropic thick cylindrical shell, ASME J Appl Mech, 65, 184, 10.1115/1.2789024

You, 1999, Elastic–plastic stress filed in a coated continuous fibrous composite subjected to thermomechanical loading, ASME J Appl Mech, 66, 750, 10.1115/1.2791712

Klosner, 1962, The elasticity solution of a long circular cylindrical shell subjected to a uniform circumferential radial line load, J Aerospace Sci, 29, 834, 10.2514/8.9614

Klosner, 1966, Comparison of elasticity and shell theory solutions, AIAA J, 4, 467, 10.2514/3.3460

Klosner, 1963, Comparison of elasticity and shell theory solutions, AIAA J, 1, 627, 10.2514/3.1605

Lekhnitskii, 1981

Wild, 1997, Analysis of filament-wound cylindrical hells under combined centrifugal pressure and axial loading, Composites A, 28, 47, 10.1016/S1359-835X(96)00093-0

Xia M, Takayanagi H, Kemmochi K. Analysis of filament-wound sandwich pipe under internal pressure. Compos Struct 2001;51:273–83

Goetschel, 1997, Analytical development of through-thickness properties of composite laminates, J Adv Mater, 29, 37

Chiao, 1966, Design for commercial filament winding, SEP J, 22, 43