Analysis of filament-wound fiber-reinforced sandwich pipe under combined internal pressure and thermomechanical loading

Soden, 1989, Experimental failure stresses for ±55° filament wound glass fiber reinforced plastic tubes under biaxial loads, Composites, 20, 125, 10.1016/0010-4361(89)90640-X

Soden, 1978, The strength of a filament wound composite under biaxial loading, Composites, 9, 247, 10.1016/0010-4361(78)90177-5

Mistry, 1992, Failure of composite cylinders under combined external pressure and axial loading, Comp Struct, 22, 193, 10.1016/0263-8223(92)90055-H

Hull, 1978, Failure of glass/polyester filament wound pipe, Composites, 9, 17, 10.1016/0010-4361(78)90513-X

Rosenow, 1984, Wind angle effects in glass fiber-reinforced polyester filament wound pipes, Composites, 15, 144, 10.1016/0010-4361(84)90727-4

Spencer, 1978, Effect of winding angle on the failure of filament wound pipe, Composites, 9, 263, 10.1016/0010-4361(78)90180-5

Uemura, 1981, Probabilistic burst strength of filament-wound cylinders under internal pressure, J Comp Mater, 15, 462, 10.1177/002199838101500505

Wild, 1997, Analysis of filament-wound cylindrical shells under combined centrifugal pressure and axial loading, Composites Part A, 28, 47, 10.1016/S1359-835X(96)00093-0

RoyAjit, 1991, Response of thick laminated composite rings to thermal stress, Comp Struct, 18, 125, 10.1016/0263-8223(91)90047-3

Ben, 1991, Structural analyses of thick-walled cross-ply laminated FRP cylindrical shells, Trans Jpn Soc Mech Eng Part A (in Japanese), 57, 1412, 10.1299/kikaia.57.1412

Kim, 1999, Buckling strength prediction of CFRP cylindrical panels using finite element Method, Composites Part A, 30, 1093, 10.1016/S1359-835X(99)00015-9

Kweon, 1998, Post-failure analysis of composite cylindrical panels under compression, J Rein Plas Comp, 17, 1665, 10.1177/073168449801701807

Lifshitz, 1995, Filament-wound pressure vessel with thick metal line, Comp Struct, 32, 313, 10.1016/0263-8223(95)00089-5

Kitao, 1994, Failure of thick-wall filament wound plastic pipes under internal pressure, J Soc Mater Sci Japan (in Japanese), 43, 1134, 10.2472/jsms.43.1134

Cho, 1998, Elastodynamic solution for the thermal shock stresses in an orthotropic thick cylindrical shell, ASME J Appl Mech, 65, 184, 10.1115/1.2789024

You, 1999, Elastic–plastic stress filed in a coated continuous fibrous composite subjected to thermomechanical loading, ASME J Appl Mech, 66, 750, 10.1115/1.2791712

Goetschel, 1997, Analytical development of through-thickness properties of composite laminates, J Adv Mater, 29, 37

Chiao, 1966, Design for commercial filament winding, SPE J, 22, 43