Analysis of changes in residual magnetic field in loaded notched samples

Yang, 2007, Magnetic field aberration induced by cycle stress, J Magn Magn Mater, 312, 72, 10.1016/j.jmmm.2006.09.019 Li, 2003, Magnetic field abnormality caused by welding residual stress, J Magn Magn Mater, 261, 385, 10.1016/S0304-8853(02)01488-9 Roskosz M. Possibilities of the application of the metal magnetic memory method to the analysis of gear durability. In: Abstracts of the ninth European conference on non-destructive testing, ECNDT, Berlin, 2006. Part 2, p. 85. Wilson J, Tian GY, Barrans S. Residual magnetic field sensing for stress measurement and defect detection. In: Abstracts of the ninth European conference on non-destructive testing, ECNDT, Berlin, 2006. Part 1. Dubow AA. Study of steel samples exposed to static and dynamic loads with the use of the metal magnetic memory method. In: Proceedings of the fourth international conference on diagnostics of instrumentation and constructions with the use of the metal magnetic memory method, Moscow, 2007. p. 34–45 [in Russian]. Deputat J. Basics of the metal magnetic memory method. Dozór Techniczny 5/2002, p. 97–105 [in Polish]. Dubow AA. Principal features of metal magnetic memory method and inspection tools as compared to known magnetic NDT methods. In: Proceedings of WCNDT 2004, Montreal Canada, 〈http://www.ndt.net/article/wcndt2004/papers/359.ntm〉. Dubow AA. Physical base of the method of metal magnetic memory. In: Proceedings of the workshop on nondestructive testing of materials and structures, NTM’02, Warsaw, 2002. Wyd. IPPT PAN, p. 1–9. Yamasaki, 1996, Effect of applied stresses on magnetostriction of low carbon steel, NDT&E Int, 29, 263, 10.1016/S0963-8695(96)00028-X Jiles, 1995, Theory of the magnetomechanical effect, J Phys D, 28, 1537, 10.1088/0022-3727/28/8/001 Dobmann G, Lang M. On-line monitoring of fatigue in the LCF and HCF range by using micro-magnetic NDT at plain carbon and austenitic stainless steel. In: Proceedings of the eighth TOC European conference on nondestructive testing, ECNDT, Barcelona, Spain, June 17–21, 2002. Gorickij WM, Dobov AA, Demin EA, Examination of structural defects in steel samples with the use of the metal magnetic memory method. Dozór Techniczny 6/2001, p. 137–40 [in Polish].