Analysis and experimental investigation on the subcooling of liquid oxygen propellant

Ma, 2017, Investigation on no-vent filling process of liquid hydrogen tank under microgravity condition, Int J Hydrogen Energy, 42, 8264, 10.1016/j.ijhydene.2017.02.198 Ma, 2018, Numerical investigation on sealing behaviors of an extremely high-speed two-stage impellers structure in cryogenic rockets, Asia-Pac J Chem Eng, 13, 10.1002/apj.2229 Ma, 2019, Investigation on cryo-wicking performance within metallic weaves under superheated conditions for screen channel liquid acquisition devices (LADs), Int J Heat Mass Transf, 141, 530, 10.1016/j.ijheatmasstransfer.2019.06.103 Ewart RO, Dergance RH. Cryogenic propellant densification study. NASA-CR159438; 1978. Tibor Lak, Martin Lozano, Thomas Tomsik. Advancement in cryogenic propulsion system performance through propellant densification. In: 32nd Joint Propulsion Conference and Exhibit, Lake Buena Vista, FL, July 1–3; 1996. NIST, Chemistry, WebBook. NIST standard reference database number 69. October 2011 release, http://webbook.nist.gov/chemistry/. Whitehead JC. Single stage to orbit mass budgets derived from propellant density and specific impulse. In: 32nd AIAA, ASME, SAE, and ASEE, Joint Propulsion Conference and Exhibit, Lake Buena Vista, FL, July 1–3; 1996. Moran ME, Haberbusch MS, Satornino GA. Densified propellant technology - Fueling aerospace vehicles in the new era. In: 33rd AlAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Seattle, WA, July 6–9; 1997. Mcnelis, 1997, Hot fire ignition test with densified liquid hydrogen using a RL10B-2 cryogenic H2/O2 rocket engine Greene WD, Boxx DL. Propellant densification for Shuttle: The SSME Perspective. In: 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA 2002-3602, Indianapolis, 7–10 July; 2002. LeMoyne R. Fundamental analysis of cryogenic propellant densification. In: 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Dayton, Ohio, 28 April - 1 May; 2008. Haberbusch MS. Study task for determining the effects of boost-phase environments on densified propellants thermal conditions for expendable launch vehicles. NASA/CR-2002-210808; 2002. Hochstein, 1990, Prediction of self-pressurization rate of cryogenic propellant tankage, J Propul Power, 6, 11, 10.2514/3.23217 Mustafi S, Canavan E, Johnson W, Kutter B, Shull J. Subcooling cryogenic propellants for long duration space exploration. In: AIAA SPACE 2009 Conference and Exposition, 14-17 September, Pasadena, California, AIAA 2009-6584; 2009. Keller CW. Effects of using subcooled liquid and slush hydrogen fuels on space vehicle design and performance. In: AIAA 3rd Propulsion Joint Specialist Conference, Washington D C, July 17–21; 1967. Fazah MM. STS propellant densification feasibility study data book. NASA-TM-108467; 1994. Lak T I, Lozano M E, Neary D A. LO2 propellant densification without use of rotating machinery. 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 7-10 July, Indianapolis, Indiana, AIAA 2002-3599, 2002. Tomsik TM. Performance tests of a liquid hydrogen propellant densification ground support system for the X33/RLV. NASA/TM 1997–107496; 1997. https://doi.org/10.2514/6.1997-2976. Greene WD, Vaughan D. Simulation and testing of in-tank propellant densification for launch vehicles. In: 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA 98-3688; 1998. Anthony ML, Greene WD. Analytical model of an existing propellant densification unit heat exchanger. In: 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA 98-3689; 1998. Greene WD, Knowles TE, Tomisk TM. Propellant densification for launch vehicles: simulation and testing 1999. In: 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA 99-31153; 1999. Tomsik TM, Meyer ML. Liquid oxygen propellant densification production and performance test results with a large-scale flight-weight propellant tank for the X33 RLV. NASA/TM 2010-216247; 2010. Johnson WL, Tomsik TK, Smudde TD, Femminineo MG, Schnell AE. A densified liquid methane delivery system for the Altair Ascent Stage. In: AIAA 2010-1904, SpaceOps 2010 Conference, 25–30 April 2010, Huntsville, Alabama; 2010. Baik JH, T-Raissi A. R&D processes for increasing density of cryogenic propellants at FSEC. Cryogenics 2004;44(6-8):451–58. Haberbusch MS, Culler AJ, Dephillips TP, Nguyen CT, Skaff AF, Yeckley AJ. A new densified propellant management system for aerospace vehicles. In: 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Indianapolis, Indiana, 7–10 July; 2002. Baik, 2006, Initial test results of laboratory scale hydrogen liquefaction and densification system, AIP Conf Proc, 823, 1530, 10.1063/1.2202577 Cho, 2006, Investigation of helium injection cooling to liquid oxygen under pressurized condition, Cryogenics, 46, 778, 10.1016/j.cryogenics.2006.07.004 Cho, 2006, Investigation of helium injection cooling to liquid oxygen propellant chamber, Cryogenics, 46, 132, 10.1016/j.cryogenics.2005.11.002 Mustafi S, Johnson W, Kashani A, Jurns J, Kutter B, Kirk D, Shull J. Subcooling for long duration in-space cryogenic propellant storage. In: AIAA SPACE 2010 Conference & Exposition, Anaheim, California, 30 August - 2 September; 2010. Xie, 2017, Study on subcooled technology for cryogenic propellants, J Aerospace Power, 32, 762 Xie, 2017, Feasibility analysis and application consideration of a rapid method to obtain subcooled cryogenic propellants, Appl Therm Eng, 118, 82, 10.1016/j.applthermaleng.2017.02.088 Xie, 2015, Performance advantages and application prospects of subcooled cryogenic propellants, J Xi'an Jiaotong Univ, 49, 16 Musk, 2018, Making life multi-planetary, New Space, 6, 1, 10.1089/space.2018.29013.emu Sippel, 2019, Assessment of multiple mission reusable launch vehicles, J Space Saf Eng, 6, 165, 10.1016/j.jsse.2019.09.001