Analysis and design methods of screw piles: A review

Adams, 1972, A study of anchors for transmission tower foundations, Can. Geotech. J., 9, 89, 10.1139/t72-007

Arup Geotechnics, 2005

Aydin, 2011, Osterberg cell load testing on helical piles, Geo-Frontiers, 2011, 66

Bowles, 1996

Budhu, 2011

Canadian Geotechnical Society, 2006. Canadian Foundation Engineering Manual, 4th ed., 488 pp.

Chance, 1993

Das, 1990

Ghaly, 1991, Installation torque of screw anchors in dry sand, Soils Found., 31, 77, 10.3208/sandf1972.31.2_77

Hawkins, 2009, Load test results — large diameter helical pipe piles, Contemp. Top. Deep Found., 488, 10.1061/41021(335)61

Hird, C.C., Stanier, S.A., 2010. Modelling helical screw piles in clay using a transparent soil. In: Proceedings of the 7th International Conference on Physical Modeling in Geotechnics, Zurich, Switzerland, 28 June–1 July. Taylor and Francis Group, London, pp. 769–774.

Hoyt, R.M., Clemence, S.P., 1989. Uplift capacity of helical anchors in soil. In: Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, vol. 2. Rio de Janeiro, Brazil, pp. 1019–1022.

Hubble Power Systems Inc., 2003. Industry Standards Based on CHANCE Multi-helix Anchor Specs. Bulletin 04 0301, Centralia, MO.

International Code Council, 2009

Kurian, 2009, Studies on the behaviour of screw piles by the finite element method, Can. Geotech. J., 46, 627, 10.1139/T09-008

Livneh, 2008, Axial testing and numerical modelling of square shaft helical piles under compressive and tensile loading, Can. Geotech. J., 45, 1142, 10.1139/T08-044

Lutenegger, 2009, Cylindrical shear or plate bearing?: Uplift behaviour of multi-helix screw anchors in clay, 456

Meyerhof, 1968, The ultimate uplift capacity of foundations, Can. Geotech. J., 5, 225, 10.1139/t68-024

Meyerhof, 1976, Bearing capacity and settlement of pile foundations, ASCE J. Geotech. Eng., 102, 197

Mitsch, 1985, The uplift capacity of helix anchors in sand, 26

Mittal, 2010, Static equilibrium of screw anchor pile under lateral load in sands, Geotech. Geol. Eng., 28, 717, 10.1007/s10706-010-9342-4

Mooney, 1985, 48

Naggar, 2007, Monotonic and cyclic behaviour of helical pile specialised connectors, Eng. Struct., 29, 2635, 10.1016/j.engstruct.2007.01.018

Narasimha Rao, 1993, Behaviour of embedded screw anchors in soft clays, Geotechnique, 43, 605, 10.1680/geot.1993.43.4.605

Narasimha Rao, 1993, Estimation of uplift capacity of helical anchors in clays, J. Geotech. Eng., 119, 352, 10.1061/(ASCE)0733-9410(1993)119:2(352)

Narasimha Rao, 1991, The behaviour of model screw piles in cohesive soils, J. Soil Found., 31, 35, 10.3208/sandf1972.31.2_35

Nasr, 2009, Performance-based design for helical piles, 496

Nasr, M.H., 2004. Large capacity screw piles. In: Proceedings of the International Conference: Future Vision and Challenges for Urban Development. Cairo, Egypt, 20–22 December, pp. 1–15.

Pack, 2000, Design of helical piles for heavily loaded structures, 353

Perko, 2009

Perlow, 2011, Helical pile acceptance criteria, design guidelines and load test verification, 94

Sakr, 2011, Installation and performance characteristics of high capacity helical piles in cohesionless soils, Deep Found. J. (DFI), 5, 39, 10.1179/dfi.2011.004

Sakr, M., 2010. Lateral resistance of high capacity helical piles: case study. In: Proceedings of the 63rd Canadian Geotechnical and 6th Canadian Permafrost Conference. Calgary, Alberta, 12–16 September, pp. 402–412.

Sakr, 2009, Performance of helical piles in oil sand, Can. Geotech. J., 46, 1046, 10.1139/T09-044

Schmidt, 2004, Screw piles: uses and considerations, Struct. Mag., 29

Tappenden, K., Sego, D., 2007. Predicting the axial capacity of screw piles installed in Canadian soils. In: Proceedings of The Canadian Geotechnical Society (CGS) Conference, OttawaGeo 2007, pp. 1608–1615.

Tappenden, 2009, Load transfer behaviour of full-scale instrumented screw anchors, 472

Tomlinson, 2001

Trofimenkov, J.G., Maruipolshii, L.G., 1965. Screw piles used for mast and tower foundations. In: Proceedings of the 6th International Conference on Soil Mechanics and Foundation Engineering, vol. 2, pp. 328–332.

Tsuha, 2010, Relationship between installation torque and uplift capacity of deep helical piles in sand, Can. Geotech. J., 47, 635, 10.1139/T09-128

Vickars, 2000, Performance of helical piles with grouted shafts, 327

Vito, D., Cook, T., 2011. Highly loaded helical piles in compression and tension applications: a case study of two projects. In: Proceedings of the Pan-Am CGS Geotechnical Conference, pp. 1–4. 〈http://geoserver.ing.puc.cl/info/conferences/PanAm2011/panam2011/pdfs/GEO11Paper902.pdf〉 (01.08.15).

Woodcock, J., 2012. Finite element analysis of screw piles. In: Proceedings of the 1st Civil and Environmental Engineering Student Conference, London, pp. 1–5. 〈https://workspace.imperial.ac.uk/civilengineering/Public/technical%20paper%20group%20A/13A-Woodcock-Finite%20Element%20Analysis%20of%20Screw%20Piles.pdf〉 (01.08.15).

Yttrup, 2003, Ultimate strength of steel screw piles in sand, Aust. Geomech.: J. News Aust. Geomech. Soc., 38, 17

Zhang, D.J.Y., Chalaturnyk, R., Robertson, P.K., Sego, D.C., Cyre, G., 1998. Screw anchor test program (Part I & II): instrumentation, site characterisation and installation. In: Proceedings of the 51st Canadian Geotechnical Conference. Edmonton.

Zhang, 1999