An overview of tailoring strain delocalization for strength-ductility synergy
Tóm tắt
Từ khóa
Tài liệu tham khảo
Zeng, 2017, Super-formable pure magnesium at room temperature, Nat Commun, 8, 972, 10.1038/s41467-017-01330-9
Lu, 2009, Strengthening materials by engineering coherent internal boundaries at the nanoscale, Science, 324, 349, 10.1126/science.1159610
Jiang, 2017, Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation, Nature, 544, 460, 10.1038/nature22032
Wu, 2017, Dual-phase nanostructuring as a route to high-strength magnesium alloys, Nature, 545, 80, 10.1038/nature21691
Lu, 2009, Revealing the maximum strength in nanotwinned copper, Science, 323, 607, 10.1126/science.1167641
Yu, 2015, Origin of dramatic oxygen solute strengthening effect in titanium, Science, 347, 635, 10.1126/science.1260485
Chen, 2015, Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles, Nature, 528, 539, 10.1038/nature16445
He, 2017, High dislocation density-induced large ductility in deformed and partitioned steels, Science, 357, 1029, 10.1126/science.aan0177
Zhong, 2017, Slip-activated surface creep with room-temperature super-elongation in metallic nanocrystals, Nat Mater, 16, 439, 10.1038/nmat4813
Clouet, 2015, Dislocation locking versus easy glide in titanium and zirconium, Nat Mater, 14, 931, 10.1038/nmat4340
Pan, 2017, History-independent cyclic response of nanotwinned metals, Nature, 551, 214, 10.1038/nature24266
Li, 2016, Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off, Nature, 534, 227, 10.1038/nature17981
Kim, 2015, Brittle intermetallic compound makes ultrastrong low-density steel with large ductility, Nature, 518, 77, 10.1038/nature14144
Hu, 2017, Grain boundary stability governs hardening and softening in extremely fine nanograined metals, Science, 355, 1292, 10.1126/science.aal5166
Li, 2017, On strain hardening mechanism in gradient nanostructures, Int J Plast, 88, 89, 10.1016/j.ijplas.2016.10.003
Wu, 2014, Extraordinary strain hardening by gradient structure, Proc Natl Acad Sci USA, 111, 7197, 10.1073/pnas.1324069111
Huang, 2006, Hardening by annealing and softening by deformation in nanostructured metals, Science, 312, 249, 10.1126/science.1124268
Arsenault, 1991, Localized deformation of SiC-Al composites, Mater Sci Eng A, 131, 55, 10.1016/0921-5093(91)90344-M
Antolovich, 2014, Plastic strain localization in metals: origins and consequences, Prog Mater Sci, 59, 1, 10.1016/j.pmatsci.2013.06.001
Kou, 2014, High-strength and high-ductility nanostructured and amorphous metallic materials, Adv Mater, 26, 5518, 10.1002/adma.201401595
Wu, 2018, Mechanistic origin and prediction of enhanced ductility in magnesium alloys, Science, 359, 447, 10.1126/science.aap8716
Glazer, 1987, Mechanical behavior of aluminum-lithium alloys at cryogenic temperatures, Metall Trans A, 18, 1695, 10.1007/BF02646201
Zhang, 2015, Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi, Nat Commun, 6, 10143, 10.1038/ncomms10143
Lu, 2014, Making strong nanomaterials ductile with gradients, Science, 345, 1455, 10.1126/science.1255940
Huang, 2018, Role of layered structure in ductility improvement of layered Ti-Al metal composite, Acta Mater, 153, 235, 10.1016/j.actamat.2018.05.005
Lu, 2016, Stabilizing nanostructures in metals using grain and twin boundary architectures, Nat Rev Mater, 1, 16019, 10.1038/natrevmats.2016.19
Fu, 2017, Achieving high strength and ductility in magnesium alloys via densely hierarchical double contraction nanotwins, Nano Lett, 17, 6117, 10.1021/acs.nanolett.7b02641
You, 2013, Plastic anisotropy and associated deformation mechanisms in nanotwinned metals, Acta Mater, 61, 217, 10.1016/j.actamat.2012.09.052
Li, 2010, Dislocation nucleation governed softening and maximum strength in nano-twinned metals, Nature, 464, 877, 10.1038/nature08929
Devaraj, 2016, A low-cost hierarchical nanostructured beta-titanium alloy with high strength, Nat Commun, 7, 11176, 10.1038/ncomms11176
Wang, 2017, New twinning route in face-centered cubic nanocrystalline metals, Nat Commun, 8, 2142, 10.1038/s41467-017-02393-4
Chen, 2016, Polysynthetic twinned TiAl single crystals for high-temperature applications, Nat Mater, 15, 876, 10.1038/nmat4677
Liu, 2013, Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility, Nat Mater, 12, 344, 10.1038/nmat3544
Wang, 2015, In situ atomic-scale observation of twinning-dominated deformation in nanoscale body-centred cubic tungsten, Nat Mater, 14, 594, 10.1038/nmat4228
Wang, 2018, Additively manufactured hierarchical stainless steels with high strength and ductility, Nat Mater, 17, 63, 10.1038/nmat5021
Liu, 2013, Strain-induced ultrahard and ultrastable nanolaminated structure in nickel, Science, 342, 337, 10.1126/science.1242578
Ma, 2017, Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals, Mater Today, 20, 323, 10.1016/j.mattod.2017.02.003
Lu, 2015, Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper, Nat Commun, 6, 7648, 10.1038/ncomms8648
Yu, 2013, Reducing deformation anisotropy to achieve ultrahigh strength and ductility in Mg at the nanoscale, Proc Natl Acad Sci USA, 110, 13289, 10.1073/pnas.1306371110
Sandlöbes, 2011, On the role of non-basal deformation mechanisms for the ductility of Mg and Mg-Y alloys, Acta Mater, 59, 429, 10.1016/j.actamat.2010.08.031
Wu, 2015, The origins of high hardening and low ductility in magnesium, Nature, 526, 62, 10.1038/nature15364
Britton, 2015, On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals, Proc R Soc A, 471, 20140881, 10.1098/rspa.2014.0881
Wang, 2016, In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures, Int J Plast, 84, 255, 10.1016/j.ijplas.2016.06.001
Huang, 2012, Discrete dislocation dynamics modelling of mechanical deformation of nickel-based single crystal superalloys, Int J Plast, 28, 141, 10.1016/j.ijplas.2011.07.003
Sun, 2018, Achieving ultra-high hardness of nanostructured Mg-8.2Gd-3.2Y-1.0Zn-0.4Zr alloy produced by a combination of high pressure torsion and ageing treatment, Scr Mater, 155, 21, 10.1016/j.scriptamat.2018.06.009
Shao, 2018, Simultaneous improvement of strength and plasticity: additional work-hardening from gradient microstructure, Acta Mater, 145, 413, 10.1016/j.actamat.2017.12.028
Wu, 2015, Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility, Proc Natl Acad Sci USA, 112, 14501, 10.1073/pnas.1517193112
Ding, 2018, Superb strength and high plasticity in laves phase rich eutectic medium-entropy-alloy nanocomposites, Int J Plast, 106, 57, 10.1016/j.ijplas.2018.03.001
Wu, 2015, Nanodomained nickel unite nanocrystal strength with coarse-grain ductility, Sci Rep, 5, 11728, 10.1038/srep11728
Tian, 2015, Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes, Sci Rep, 5, 16707, 10.1038/srep16707
Yi, 2016, Work hardening behavior of nanotwinned austenitic grains in a metastable austenitic stainless steel, Scr Mater, 114, 133, 10.1016/j.scriptamat.2015.12.021
Kwasniak, 2016, Solid solution strengthening of hexagonal titanium alloys: Restoring forces and stacking faults calculated from first principles, Acta Mater, 102, 304, 10.1016/j.actamat.2015.09.041
Pierce, 2015, The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe-Mn-Al-Si steels during tensile deformation, Acta Mater, 100, 178, 10.1016/j.actamat.2015.08.030
Xu, 2017, The synchronous improvement of strength and plasticity (SISP) in new Ni-Co based disc superalloys by controling stacking fault energy, Sci Rep, 7, 8046, 10.1038/s41598-017-07884-4
He, 2018, Simultaneous increase of both strength and ductility of medium Mn transformation-induced plasticity steel by vanadium alloying, Metall Mater Trans A, 49, 1433, 10.1007/s11661-018-4517-3
Sohn, 2019, Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion, Adv Mater, 31, 1807142, 10.1002/adma.201807142
Sandlöbes, 2012, The relation between ductility and stacking fault energies in Mg and Mg-Y alloys, Acta Mater, 60, 3011, 10.1016/j.actamat.2012.02.006
Wang, 2016, Kink formation and concomitant twin nucleation in Mg-Y, Scr Mater, 111, 68, 10.1016/j.scriptamat.2015.08.016
Nie, 2013, Periodic segregation of solute atoms in fully coherent twin boundaries, Science, 340, 957, 10.1126/science.1229369
Liang, 2016, First-principles study of four mechanical twins and their deformation along the c-axis in pure α-titanium and in titanium in presence of oxygen and hydrogen, Acta Mater, 110, 258, 10.1016/j.actamat.2016.03.014
Wu, 2016, Origin of reduced anisotropic deformation in hexagonal close packed Ti-Al alloy, Mater Des, 111, 119, 10.1016/j.matdes.2016.08.096
Chen, 2017, Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel, Science, 355, 1196, 10.1126/science.aal2418
Kuzmina, 2015, Linear complexions: confined chemical and structural states at dislocations, Science, 349, 1080, 10.1126/science.aab2633
Zhao, 2019, Direct observation and impact of co-segregated atoms in magnesium having multiple alloying elements, Nat Commun, 10, 3243, 10.1038/s41467-019-10921-7
Wu, 2018, Strain partitioning behavior of in situ Ti5Si3/TiAl composites, J Alloys Compd, 744, 182, 10.1016/j.jallcom.2018.02.087
Jiang, 2014, Microalloying ultrafine grained Al alloys with enhanced ductility, Sci Rep, 4, 3605, 10.1038/srep03605
Jiang, 2016, Deformation compatibility in a single crystalline Ni superalloy, Proc R Soc A, 472, 20150690, 10.1098/rspa.2015.0690
Zhang, 2018, Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy, Acta Mater, 151, 310, 10.1016/j.actamat.2018.04.001
Liang, 2018, High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys, Nat Commun, 9, 4063, 10.1038/s41467-018-06600-8
Wu, 2016, Nanoscale origins of the oriented precipitation of Ti3Al in Ti-Al systems, Scr Mater, 125, 34, 10.1016/j.scriptamat.2016.07.037
Chen, 2006, Atomic pillar-based nanoprecipitates strengthen AlMgSi alloys, Science, 312, 416, 10.1126/science.1124199
Zandbergen, 1997, Structure determination of Mg5Si6 particles in Al by dynamic electron diffraction studies, Science, 277, 1221, 10.1126/science.277.5330.1221
Guan, 2017, Crystal plasticity modelling and HR-DIC measurement of slip activation and strain localization in single and oligo-crystal Ni alloys under fatigue, Int J Plast, 88, 70, 10.1016/j.ijplas.2016.10.001
Zhang, 2018, Study of microstructural grain and geometric size effects on plastic heterogeneities at grain-level by using crystal plasticity modeling with high-fidelity representative microstructures, Int J Plast, 100, 69, 10.1016/j.ijplas.2017.09.011
Wu, 2017, Nanoscale strain characterization of Ti3Al precipitate-reinforced Ti alloys, Mater Lett, 209, 182, 10.1016/j.matlet.2017.08.005
Ming, 2018, Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates, Int J Plast, 100, 177, 10.1016/j.ijplas.2017.10.005
Nakata, 2017, Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys, Acta Mater, 130, 261, 10.1016/j.actamat.2017.03.046
Zhang, 2017, Atomic-scale analysis of early-stage precipitation in Ti(Al, Si)3 alloy, Mater Des, 134, 244, 10.1016/j.matdes.2017.08.052
Guo, 2017, Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography, Acta Mater, 123, 373, 10.1016/j.actamat.2016.10.022
Göken, 2011, Tailoring nanostructured, graded, and particle-reinforced Al laminates by accumulative roll bonding, Adv Mater, 23, 2663, 10.1002/adma.201100407
Fan, 2017, Improving the tensile ductility of metal matrix composites by laminated structure: a coupled X-ray tomography and digital image correlation study, Scr Mater, 135, 63, 10.1016/j.scriptamat.2017.03.030
Tjong, 2000, Microstructural and mechanical characteristics of in situ metal matrix composites, Mater Sci Eng R, 29, 49, 10.1016/S0927-796X(00)00024-3
Mortensen, 2010, Metal matrix composites, Annu Rev Mater Res, 40, 243, 10.1146/annurev-matsci-070909-104511
Wu, 2013, Mechanical properties of (Ti2AlC+Ti3AlC)-TiAl ceramic-intermetallic laminate (CIL) composites, Mater Sci Eng A, 585, 439, 10.1016/j.msea.2013.07.076
Withers, 2012, Fatigue and damage in structural materials studied by X-ray tomography, Annu Rev Mater Res, 42, 81, 10.1146/annurev-matsci-070511-155111
Lunt, 2017, Effect of nanoscale α2 precipitation on strain localisation in a two-phase Ti-alloy, Acta Mater, 129, 72, 10.1016/j.actamat.2017.02.068
Lunt, 2018, Quantification of strain localisation in a bimodal two-phase titanium alloy, Scr Mater, 145, 45, 10.1016/j.scriptamat.2017.10.012
Fan, 2017, Influence of plastic strain localisation on the mechanical properties of metal matrix composites, Philos Mag Lett, 97, 241, 10.1080/09500839.2017.1322724
Guo, 2012, Effects of degree of deformation on the microstructure, mechanical properties and texture of hybrid-reinforced titanium matrix composites, Acta Mater, 60, 2656, 10.1016/j.actamat.2012.01.032
Li, 2015, Enhanced mechanical properties of graphene (reduced graphene oxide)/aluminum composites with a bioinspired nanolaminated structure, Nano Lett, 15, 8077, 10.1021/acs.nanolett.5b03492
Jiang, 2011, A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility, Scr Mater, 65, 412, 10.1016/j.scriptamat.2011.05.022
Liu, 2018, Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process, Mater Res Lett, 6, 406, 10.1080/21663831.2018.1471421
Hutchinson, 2010, Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals, Scr Mater, 63, 737, 10.1016/j.scriptamat.2010.05.047
Ardeljan, 2015, A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model, Int J Plast, 74, 35, 10.1016/j.ijplas.2015.06.003
Tasan, 2015, An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design, Annu Rev Mater Res, 45, 391, 10.1146/annurev-matsci-070214-021103
Zepeda-Ruiz, 2017, Probing the limits of metal plasticity with molecular dynamics simulations, Nature, 550, 492, 10.1038/nature23472
Beyerlein, 2014, Growth twins and deformation twins in metals, Annu Rev Mater Res, 44, 329, 10.1146/annurev-matsci-070813-113304
Wang, 2018, In situ atomistic deformation mechanisms of twin-structured nanocrystal Pt, Scr Mater, 147, 103, 10.1016/j.scriptamat.2018.01.012
Zhu, 2012, Plastic deformation mechanism in nanotwinned metals: an insight from molecular dynamics and mechanistic modeling, Scr Mater, 66, 843, 10.1016/j.scriptamat.2012.01.031
Sun, 2018, Nanotwinned and hierarchical nanotwinned metals: a review of experimental, computational and theoretical efforts. npj, Comput Mater, 4, 6, 10.1038/s41524-018-0062-2
Kacher, 2014, Dislocation interactions with grain boundaries, Curr Opin Solid State Mater Sci, 18, 227, 10.1016/j.cossms.2014.05.004
Zhu, 2012, Deformation twinning in nanocrystalline materials, Prog Mater Sci, 57, 1, 10.1016/j.pmatsci.2011.05.001
Cao, 2018, Intersectant coherent twin boundaries governed strong strain hardening behavior in nanocrystalline Cu, Int J Plast, 103, 81, 10.1016/j.ijplas.2018.01.002
Zou, 2018, Dislocation nucleation facilitated by atomic segregation, Nat Mater, 17, 56, 10.1038/nmat5034
Wu, 2017, Heterogeneous materials: a new class of materials with unprecedented mechanical properties, Mater Res Lett, 5, 527, 10.1080/21663831.2017.1343208
Azizi, 2018, Using architectured materials to control localized shear fracture, Acta Mater, 143, 298, 10.1016/j.actamat.2017.10.027
Yang, 2018, Mechanical properties of metal-ceramic nanolaminates: effect of constraint and temperature, Acta Mater, 142, 37, 10.1016/j.actamat.2017.09.042
Liu, 2017, Functional gradients and heterogeneities in biological materials: design principles, functions, and bioinspired applications, Prog Mater Sci, 88, 467, 10.1016/j.pmatsci.2017.04.013
Chen, 2016, Lowering coefficient of friction in Cu alloys with stable gradient nanostructures, Sci Adv, 2, 10.1126/sciadv.1601942
Wu, 2017, Fracture behavior and strain evolution of laminated composites, Compos Struct, 163, 123, 10.1016/j.compstruct.2016.12.036
Xu, 2018, Deformation behavior of ultra-strong and ductile Mg-Gd-Y-Zn-Zr alloy with bimodal microstructure, Metall Mater Trans A, 49, 1931, 10.1007/s11661-018-4507-5
Bermejo, 2017, Hierarchical architectures to enhance structural and functional properties of brittle materials, Adv Eng Mater, 19, 1600683, 10.1002/adem.201600683
Li, 2019, Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy, Acta Mater, 167, 23, 10.1016/j.actamat.2019.01.030
Polonsky, 2020, Solidification-driven orientation gradients in additively manufactured stainless steel, Acta Mater, 183, 249, 10.1016/j.actamat.2019.10.047
Godec, 2020, Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting, Mater Charact, 160, 110074, 10.1016/j.matchar.2019.110074
Wang, 2019, Time-resolved atomic-scale observations of deformation and fracture of nanoporous gold under tension, Acta Mater, 165, 99, 10.1016/j.actamat.2018.10.030
Eftink, 2017, Deformation response of AgCu interfaces investigated by in situ and ex situ TEM straining and MD simulations, Acta Mater, 138, 212, 10.1016/j.actamat.2017.07.051
Li, 2018, Unraveling submicron-scale mechanical heterogeneity by three-dimensional X-ray microdiffraction, Proc Natl Acad Sci U S A, 115, 483, 10.1073/pnas.1711994115
Abdolvand, 2018, Strong grain neighbour effects in polycrystals, Nat Commun, 9, 171, 10.1038/s41467-017-02213-9
Yang, 2018, Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength, Proc Natl Acad Sci USA, 115, 7224, 10.1073/pnas.1807817115
Pineau, 2016, Failure of metals I: Brittle and ductile fracture, Acta Mater, 107, 424, 10.1016/j.actamat.2015.12.034
Martin, 2013, Plastic strain heterogeneities in an Mg-1Zn-0.5Nd alloy, Scr Mater, 68, 695, 10.1016/j.scriptamat.2013.01.017
Honniball, 2015, Grain breakup during elevated temperature deformation of an HCP metal, Metall Mater Trans A, 46, 2143, 10.1007/s11661-015-2812-9
Ojima, 2012, Stress partitioning behavior of multilayered steels during tensile deformation measured by in situ neutron diffraction, Scr Mater, 66, 139, 10.1016/j.scriptamat.2011.10.018
Fang, 2011, Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper, Science, 331, 1587, 10.1126/science.1200177
Huang, 2016, Revealing extraordinary tensile plasticity in layered Ti-Al metal composite, Sci Rep, 6, 38461, 10.1038/srep38461
Zeng, 2016, Gradient plasticity in gradient nano-grained metals, Extreme Mech Lett, 8, 213, 10.1016/j.eml.2015.12.005
Ma, 2016, Mechanical properties of copper/bronze laminates: role of interfaces, Acta Mater, 116, 43, 10.1016/j.actamat.2016.06.023
Seok, 2016, Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel, Acta Mater, 121, 164, 10.1016/j.actamat.2016.09.007
Li, 2017, Grain rotations during uniaxial deformation of gradient nano-grained metals using crystal plasticity finite element simulations, Extreme Mech Lett, 16, 41, 10.1016/j.eml.2017.09.003
Wu, 2017, Deformation behavior of brittle/ductile multilayered composites under interface constraint effect, Int J Plast, 89, 96, 10.1016/j.ijplas.2016.11.005
Huang, 2018, Interface affected zone for optimal strength and ductility in heterogeneous laminate, Mater Today, 21, 713, 10.1016/j.mattod.2018.03.006
Han, 2013, Quantitative measurement of strain partitioning and slip systems in a dual-phase steel, Scr Mater, 69, 13, 10.1016/j.scriptamat.2013.03.021
Lee, 2018, Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20% ductility by Mn-segregation-induced TRIP mechanism, Acta Mater, 147, 247, 10.1016/j.actamat.2018.01.033
Fu, 2018, Engineering heterostructured grains to enhance strength in a single-phase high-entropy alloy with maintained ductility, Mater Res Lett, 6, 634, 10.1080/21663831.2018.1526222
Mao, 2016, Synthetic nacre by predesigned matrix-directed mineralization, Science, 354, 107, 10.1126/science.aaf8991
Bai, 2016, Bioinspired hydroxyapatite/poly(methyl methacrylate) composite with a nacre-mimetic architecture by a bidirectional freezing method, Adv Mater, 28, 50, 10.1002/adma.201504313
Kolednik, 2011, Bioinspired design criteria for damage-resistant materials with periodically varying microstructure, Adv Funct Mater, 21, 3634, 10.1002/adfm.201100443
Launey, 2010, A novel biomimetic approach to the design of high-performance ceramic-metal composites, J R Soc Interface, 7, 741, 10.1098/rsif.2009.0331
Wu, 2015, Ductile-phase toughening in TiBw/Ti-Ti3Al metallic-intermetallic laminate composites, Metall Mater Trans A, 46, 3803, 10.1007/s11661-015-3025-y
Du, 2016, Laminated Ti-Al composites: Processing, structure and strength, Mater Sci Eng A, 673, 572, 10.1016/j.msea.2016.07.108
Liu, 2017, Tensile and bending behaviors and characteristics of laminated Ti-(TiBw/Ti) composites with different interface status, Composites Part B, 108, 377, 10.1016/j.compositesb.2016.10.001
Liu, 2014, Effect of pure Ti thickness on the tensile behavior of laminated Ti-TiBw/Ti composites, Mater Sci Eng A, 617, 115, 10.1016/j.msea.2014.08.065
Liu, 2011, Enhanced toughness and fatigue strength of cold roll bonded Cu/Cu laminated composites with mechanical contrast, Scr Mater, 65, 891, 10.1016/j.scriptamat.2011.08.001
Yan, 2013, Shear stress-driven refreshing capability of plastic deformation in nanolayered metals, Phys Rev Lett, 110, 10.1103/PhysRevLett.110.155502
Zhao, 2018, Grain boundary-assisted deformation in graphene-Al nanolaminated composite micro-pillars, Mater Res Lett, 6, 41, 10.1080/21663831.2017.1386241
Wang, 2017, Strength and plasticity of nanolaminated materials, Mater Res Lett, 5, 1, 10.1080/21663831.2016.1225321
Ferraro, 2018, Strong and tough metal/ceramic micro-laminates, Acta Mater, 144, 202, 10.1016/j.actamat.2017.10.059
Withers, 2011, 3D crack-tip microscopy: Illuminating micro-scale effects on crack-tip behavior, Adv Eng Mater, 13, 1096, 10.1002/adem.201100092
Yin, 2019, Impact-resistant nacre-like transparent materials, Science, 364, 1260, 10.1126/science.aaw8988
Wu, 2019, Manipulating the plastic strain delocalization through ultra-thinned hierarchical design for strength-ductility synergy, Scr Mater, 172, 165, 10.1016/j.scriptamat.2019.07.034
Liu, 2016, Bending behaviors and fracture characteristics of laminated ductile-tough composites under different modes, Compos Sci Technol, 126, 94, 10.1016/j.compscitech.2016.02.011
Koyama, 2017, Bone-like crack resistance in hierarchical metastable nanolaminate steels, Science, 355, 1055, 10.1126/science.aal2766
Liang, 2017, Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites, Scr Mater, 134, 28, 10.1016/j.scriptamat.2017.02.032
Koseki, 2014, Development of multilayer steels for improved combinations of high strength and high ductility, Mater Trans, 55, 227, 10.2320/matertrans.M2013382
Kim, 2018, Suppressed deformation instability in the twinning-induced plasticity steel-cored three-layer steel sheet, Acta Mater, 147, 304, 10.1016/j.actamat.2018.01.042
Yuan, 2019, Ductility by shear band delocalization in the nano layer of gradient structure, Mater Res Lett, 7, 12, 10.1080/21663831.2018.1546238
Zheng, 2019, Towards strength-ductility synergy through hierarchical microstructure design in an austenitic stainless steel, Scr Mater, 169, 76, 10.1016/j.scriptamat.2019.05.017
Huang, 2017, Strengthening and toughening of layered Ti-Al metal composites by controlling local strain contribution, IOP Conf Ser: Mater Sci Eng, 219, 10.1088/1757-899X/219/1/012028
Lhuissier, 2011, Strain field in a brittle/ductile multilayered steel composite, Scr Mater, 64, 970, 10.1016/j.scriptamat.2011.01.048
Geng, 2018, Recent progress on the fabrication of TiAl-based composites sheet by reaction annealing of elemental foils, Acta Metall Sinica, 54, 1625
Zhang, 2017, Fabricating interstitial-free steel with simultaneous high strength and good ductility with homogeneous layer and lamella structure, Scr Mater, 141, 111, 10.1016/j.scriptamat.2017.06.044
Bhattacharjee, 2018, Simultaneous strength-ductility enhancement of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy by cryo-rolling and annealing, Sci Rep, 8, 3276, 10.1038/s41598-018-21385-y
Zhang, 2018, Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy, Scr Mater, 154, 78, 10.1016/j.scriptamat.2018.05.020
He, 2018, Strong and ductile medium Mn steel without transformation-induced plasticity effect, Mater Res Lett, 6, 365, 10.1080/21663831.2018.1461141
Shi, 2019, Bioinspired ultrasensitive and stretchable MXene-based strain sensor via nacre-mimetic microscale “brick-and-mortar” architecture, ACS Nano, 13, 649, 10.1021/acsnano.8b07805
Zhao, 2019, Assessment of bamboo charcoal/nano-TiO2 (BC/TiO2) composite material and its application in photocatalytic coating, J Inorg Organomet Polym Mater, 29, 799, 10.1007/s10904-018-01054-3
Luz, 2009, Biomimetic design of materials and biomaterials inspired by the structure of nacre, Philos Trans R Soc A, 367, 1587, 10.1098/rsta.2009.0007
Clifton, 2020, Polymer nanocomposites for high-velocity impact applications-a review, Compos Commun, 17, 72, 10.1016/j.coco.2019.11.013
Van Damme, 2018, Concrete material science: past, present, and future innovations, Cem Concr Res, 112, 5, 10.1016/j.cemconres.2018.05.002
Fu, 2020, Enhancing the interfacial properties of high-modulus carbon fiber reinforced polymer matrix composites via electrochemical surface oxidation and grafting, Composites Part A, 130, 10.1016/j.compositesa.2019.105719
Bironeau, 2016, Evaluation of morphological representative sample sizes for nanolayered polymer blends, J Microsc, 264, 48, 10.1111/jmi.12415
Dutta, 2013, Optimal overlap length in staggered architecture composites under dynamic loading conditions, J Mech Phys Solids, 61, 145, 10.1016/j.jmps.2012.08.005
Grossman, 2017, Mineral nano-interconnectivity stiffens and toughens nacre-like composite materials, Adv Mater, 29, 1605039, 10.1002/adma.201605039
Zhu, 1997, Improving brick-to-mortar bond strength by the addition of carbon fibers to the mortar, Cem Concr Res, 27, 1829, 10.1016/S0008-8846(97)00179-8
Mccartney, 1992, Theory of stress transfer in a 0o–90o-0o cross-ply laminate containing a parallel array of transverse cracks, J Mech Phys Solids, 40, 27, 10.1016/0022-5096(92)90226-R
Mccartney, 1998, Predicting transverse crack formation in cross-ply laminates, Compos Sci Technol, 58, 1069, 10.1016/S0266-3538(96)00142-X
Liu, 2005, Forced assembly of polymer nanolayers thinner than the interphase, Macromolecules, 38, 10721, 10.1021/ma051649x
Jiang, 2014, Formation mechanism of high-density, flattened polymer nanolayers adsorbed on planar solids, Macromolecules, 47, 2682, 10.1021/ma5003485
Lemieux, 2006, Polymeric nanolayers as actuators for ultrasensitive thermal bimorphs, Nano Lett, 6, 730, 10.1021/nl0525305
Voitovych, 2010, Lateral semiconductive and polymer conductive nanolayered structures: preparation, properties, and application, Mol Cryst Liq Cryst, 497, 55
Luzinov, 2001, Nanotribological behavior of tethered reinforced polymer nanolayer coatings, Tribol Int, 34, 327, 10.1016/S0301-679X(01)00019-6
Amirshaqaqi, 2014, Investigation of corrosion behavior of aluminum flakes coated by polymeric nanolayer: effect of polymer type, Corros Sci, 87, 392, 10.1016/j.corsci.2014.06.045
Singh, 2007, The role of independently variable grafting density and layer thickness of polymer nanolayers on peptide adsorption and cell adhesion, Biomaterials, 28, 763, 10.1016/j.biomaterials.2006.09.036
Carr, 2012, Confined crystallization in polymer nanolayered films: a review, J Mater Res, 27, 1326, 10.1557/jmr.2012.17
Jiang, 2008, A shear-lag model for three-dimensional, unidirectional multilayered structures, Int J Solids Struct, 45, 4049, 10.1016/j.ijsolstr.2008.02.018
Rai, 2018, Multifidelity multiscale modeling of nanocomposites for microstructure and macroscale analysis, Compos Struct, 200, 204, 10.1016/j.compstruct.2018.05.075
Begley, 2012, Micromechanical models to guide the development of synthetic ‘brick and mortar’ composites, J Mech Phys Solids, 60, 1545, 10.1016/j.jmps.2012.03.002
Guinea, 2000, Micromechanical modeling of brick-masonry fracture, Cem Concr Res, 30, 731, 10.1016/S0008-8846(00)00228-3
Zhang, 2018, Application of neutron imaging to investigate fundamental aspects of durability of cement-based materials: a review, Cem Concr Res, 108, 152, 10.1016/j.cemconres.2018.03.003
Zhao, 2017, Assessment of the quantitative accuracy of Rietveld/XRD analysis of crystalline and amorphous phases in fly ash, Anal Methods, 9, 2415, 10.1039/C7AY00337D
Pei, 2020, Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography, Composites Part A, 130, 10.1016/j.compositesa.2019.105732
Chen, 2013, Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete, Constr Build, Mater, 47, 419, 10.1016/j.conbuildmat.2013.05.063
Song, 2018, Processing bulk natural wood into a high-performance structural material, Nature, 554, 224, 10.1038/nature25476
Wu, 2016, Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility, Acta Mater, 112, 337, 10.1016/j.actamat.2016.04.045
Wu, 2014, Synergetic strengthening by gradient structure, Mater Res Lett, 2, 185, 10.1080/21663831.2014.935821
Ma, 2015, Strain hardening and ductility in a coarse-grain/nanostructure laminate material, Scr Mater, 103, 57, 10.1016/j.scriptamat.2015.03.006
Moering, 2016, Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod, Scr Mater, 122, 106, 10.1016/j.scriptamat.2016.05.006
Wang, 2018, Understanding the high strength and good ductility in LPSO-containing Mg alloy using synchrotron X-ray diffraction, Metall Mater Trans A, 49, 5382, 10.1007/s11661-018-4881-z
Wei, 2019, Development of strong and ductile metastable face-centered cubic single-phase high-entropy alloys, Acta Mater, 181, 318, 10.1016/j.actamat.2019.09.050
Kishida, 1999, C-axis tensile deformation of Ti3Al with the DO19 structure at room temperature, Acta Mater, 47, 3405, 10.1016/S1359-6454(99)00209-8
Bian, 2017, The evolution of strain gradient and anisotropy in gradient-structured metal, Metall Mater Trans A, 48, 3951, 10.1007/s11661-017-4199-2
Long, 2018, Abnormal grain coarsening in cyclically deformed gradient nanograined Cu, Scr Mater, 145, 99, 10.1016/j.scriptamat.2017.10.019
Zhou, 2018, Enhanced thermal stability of nanograined metals below a critical grain size, Science, 360, 526, 10.1126/science.aar6941
Wang, 2017, Revealing interfacial diffusion kinetics in ultra-fine-laminated Ni with low-angle grain boundaries, Mater Res Lett, 5, 577, 10.1080/21663831.2017.1368036
Ovid'ko, 2018, Review on superior strength and enhanced ductility of metallic nanomaterials, Prog Mater Sci, 94, 462, 10.1016/j.pmatsci.2018.02.002
Ojima, 2011, Stress partitioning behavior in an fcc alloy evaluated by the in situ/ex situ EBSD-Wilkinson method, Acta Mater, 59, 4177, 10.1016/j.actamat.2011.03.042
Lu, 2015, Gradient nanostructured materials, Acta Metall Sinica, 51, 1
Wei, 2014, Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins, Nat Commun, 5, 3580, 10.1038/ncomms4580
Kalsar, 2018, A novel way to enhance the strength of twinning induced plasticity (TWIP) steels, Scr Mater, 154, 207, 10.1016/j.scriptamat.2018.05.045
Wu, 2016, Fabrication and mechanical properties of TiBw/Ti-Ti(Al) laminated composites, Mater Des, 89, 697, 10.1016/j.matdes.2015.10.025
Zheng, 2019, Manipulating the powder size to achieve enhanced strength and ductility in harmonic structured Al alloy, Mater Res Lett, 7, 217, 10.1080/21663831.2019.1580621
Chen, 2017, Current state of Fe-Mn-Al-C low density steels, Prog Mater Sci, 89, 345, 10.1016/j.pmatsci.2017.05.002
Xu, 2017, Effect of LPSO and SFs on microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy, Sci Rep, 7, 40846, 10.1038/srep40846
Xu, 2017, Ageing behavior of extruded Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr (wt.%) alloy containing LPSO phase and γ' precipitates, Sci Rep, 7, 43391, 10.1038/srep43391
Vajpai, 2016, Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials, Mater Res Lett, 4, 191, 10.1080/21663831.2016.1218965
Du, 2016, A study on the orientation inheritance in laminated NiAl produced by in situ reaction annealing, Micron, 83, 42, 10.1016/j.micron.2016.01.006
Fan, 2016, Fabrication, microstructure, and mechanical property of NiAl-based composite with microlaminated architecture by roll bonding and annealing treatment, Metall Mater Trans A, 47, 1280, 10.1007/s11661-015-3301-x
Fan, 2014, Producing laminated NiAl with bimodal distribution of grain size by solid-liquid reaction treatment, Mater Sci Eng A, 590, 318, 10.1016/j.msea.2013.10.038
Du, 2017, Synthesis mechanism and strengthening effects of laminated NiAl by reaction annealing, Metall Mater Trans A, 48, 168, 10.1007/s11661-016-3846-3
Armstrong, 2010, Dislocation viscoplasticity aspects of material fracturing, Eng Fract Mech, 77, 1348, 10.1016/j.engfracmech.2010.02.019
Park, 2018, Additional hardening in harmonic structured materials by strain partitioning and back stress, Mater Res Lett, 6, 261, 10.1080/21663831.2018.1439115
Ye, 2016, High-entropy alloy: challenges and prospects, Mater Today, 19, 349, 10.1016/j.mattod.2015.11.026
Liu, 2018, The role of transformation-induced plasticity in the development of advanced high strength steels, Adv Eng Mater, 20, 1701083, 10.1002/adem.201701083
Bouville, 2014, Strong, tough and stiff bioinspired ceramics from brittle constituents, Nat Mater, 13, 508, 10.1038/nmat3915
Liu, 2018, Dislocation network in additive manufactured steel breaks strength-ductility trade-off, Mater Today, 21, 354, 10.1016/j.mattod.2017.11.004
Vyatskikh, 2018, Additive manufacturing of 3D nano-architected metals, Nat Commun, 9, 593, 10.1038/s41467-018-03071-9
Zhu, 2018, Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting, Scr Mater, 154, 20, 10.1016/j.scriptamat.2018.05.015
Rohatgi, 2001, The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: deformation twinning, work hardening, and dynamic recovery, Metall Mater Trans A, 32, 135, 10.1007/s11661-001-0109-7
Nene, 2018, Reversed strength-ductility relationship in microstructurally flexible high entropy alloy, Scr Mater, 154, 163, 10.1016/j.scriptamat.2018.05.043
Hughes, 2018, The microstructural origin of work hardening stages, Acta Mater, 148, 374, 10.1016/j.actamat.2018.02.002
Madivala, 2018, Temperature dependent strain hardening and fracture behavior of TWIP steel, Int J Plast, 104, 80, 10.1016/j.ijplas.2018.02.001
Zhang, 2019, Hierarchical 3D nanolayered duplex-phase Zr with high strength, strain hardening, and ductility, Phys Rev Lett, 122, 10.1103/PhysRevLett.122.255501
Gottstein, 2004
Na, 2013, Strain localization behavior in low-carbon martensitic steel during tensile deformation, Scr Mater, 69, 793, 10.1016/j.scriptamat.2013.08.030
Somekawa, 2018, Superior room temperature ductility of magnesium dilute binary alloy via grain boundary sliding, Scr Mater, 150, 26, 10.1016/j.scriptamat.2018.02.034
Pineau, 2016, Failure of metals III: Fracture and fatigue of nanostructured metallic materials, Acta Mater, 107, 508, 10.1016/j.actamat.2015.07.049
Wu, 2009, Strong strain hardening in nanocrystalline nickel, Phys Rev Lett, 103, 10.1103/PhysRevLett.103.205504
Cheng, 2018, Extra strengthening and work hardening in gradient nanotwinned metals, Science, 362, eaau1925, 10.1126/science.aau1925
Han, 2005, Mechanism-based strain gradient crystal plasticity-II. Analysis, J Mech Phys Solids, 53, 1204, 10.1016/j.jmps.2005.01.004
Kocks, 2003, Physics and phenomenology of strain hardening: the FCC case, Prog Mater Sci, 48, 171, 10.1016/S0079-6425(02)00003-8
Fitzner, 2016, The effect of aluminium on twinning in binary alpha-titanium, Acta Mater, 103, 341, 10.1016/j.actamat.2015.09.048
Kuhr, 2019, Stress localization resulting from grain boundary dislocation interactions in relaxed and defective grain boundaries, Metall Mater Trans A, 51, 667, 10.1007/s11661-019-05534-0
Ledermueller, 2019, Advanced thermo-mechanical process for homogenous hierarchical microstructures in HSLA steels, Metall Mater Trans A, 50, 5800, 10.1007/s11661-019-05486-5
Hutchinson, 1981, Shear band formation in plane strain, Int J Solids Struct, 17, 451, 10.1016/0020-7683(81)90053-6
Desrues, 2002, Shear band analysis and shear moduli calibration, Int J Solids Struct, 39, 3757, 10.1016/S0020-7683(02)00177-4
Pagan, 2018, Analyzing shear band formation with high resolution X-ray diffraction, Acta Mater, 147, 133, 10.1016/j.actamat.2017.12.046
Yang, 2018, On the characteristics of Portevin-Le Chatelier bands in cold-rolled 7Mn steel showing transformation-induced plasticity, Int J Plast, 103, 188, 10.1016/j.ijplas.2018.01.010
Rudnicki, 1975, Conditions for the localization of deformation in pressure-sensitive dilatant materials, J Mech Phys Solids, 23, 371, 10.1016/0022-5096(75)90001-0
Li, 2008, Interface instability within shear bands in nanoscale Au/Cu multilayers, Scr Mater, 59, 1226, 10.1016/j.scriptamat.2008.08.017
Sabirov, 2008, Tensile deformation of an ultrafine-grained aluminium alloy: Micro shear banding and grain boundary sliding, Acta Mater, 56, 2223, 10.1016/j.actamat.2008.01.020
Sabirov, 2013, Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development, Mater Sci Eng A, 560, 1, 10.1016/j.msea.2012.09.020
Hu, 2009, Solute-enhanced tensile ductility of ultrafine-grained Al-Zn alloy fabricated by friction stir processing, Scr Mater, 60, 639, 10.1016/j.scriptamat.2008.12.031
Cao, 2020, On the exceptional damage-tolerance of gradient metallic materials, Mater Today, 10.1016/j.mattod.2019.09.023
Wang, 2020, Dense dispersed shear bands in gradient-structured Ni, Int J Plast, 124, 186, 10.1016/j.ijplas.2019.08.012
Wang, 2017, Optimal stress and deformation partition in gradient materials for better strength and tensile ductility: a numerical investigation, Sci Rep, 7, 10954, 10.1038/s41598-017-10941-7
Cui, 2016, Preparation of a novel layer-structured Ti3Al matrix composite sheet by liquid-solid reaction between Al foils and TiB/Ti composite foils, Mater Des, 101, 181, 10.1016/j.matdes.2016.04.009
Li, 2010, On plasticity and fracture of nanostructured Cu/X (X=Au, Cr) multilayers: The effects of length scale and interface/boundary, Acta Mater, 58, 3877, 10.1016/j.actamat.2010.03.042
Magid, 2009, Mapping mesoscale heterogeneity in the plastic deformation of a copper single crystal, Philos Mag, 89, 77, 10.1080/14786430802558577
Malitckii, 2018, Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel, Acta Mater, 144, 51, 10.1016/j.actamat.2017.10.038
Orozco-Caballero, 2017, How magnesium accommodates local deformation incompatibility: a high-resolution digital image correlation study, Acta Mater, 133, 367, 10.1016/j.actamat.2017.05.040
Zhang, 2016, Crack nucleation using combined crystal plasticity modelling, high-resolution digital image correlation and high-resolution electron backscatter diffraction in a superalloy containing non-metallic inclusions under fatigue, Proc R Soc A, 472, 20150792, 10.1098/rspa.2015.0792
Fujita, 2018, Experimental-numerical study on strain and stress partitioning in bainitic steels with martensite-austenite constituents, Int J Plast, 104, 39, 10.1016/j.ijplas.2018.01.012
Matsuno, 2015, Mesoscale simulation of the early evolution of ductile fracture in dual-phase steels, Int J Plast, 74, 17, 10.1016/j.ijplas.2015.06.004
Morgeneyer, 2014, In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet, Acta Mater, 69, 78, 10.1016/j.actamat.2014.01.033
Stinville, 2015, High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy, Acta Mater, 98, 29, 10.1016/j.actamat.2015.07.016
Tasan, 2014, Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations, Int J Plast, 63, 198, 10.1016/j.ijplas.2014.06.004
Hazeli, 2015, Three-dimensional effects of twinning in magnesium alloys, Scr Mater, 100, 9, 10.1016/j.scriptamat.2014.12.001
Arsenault, 1994, Deformation and fracture behavior of metal-ceramic matrix composite materials, Prog Mater Sci, 38, 1, 10.1016/0079-6425(94)90002-7
Miao, 2018, High elongation achieved by band-like distribution of reinforcements in aluminum matrix composites, Mater Charact, 144, 42, 10.1016/j.matchar.2018.06.031
Withers, 2015, Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy, Philos Trans R Soc A, 373, 1, 10.1098/rsta.2013.0157
Guery, 2016, Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations, Int J Plast, 81, 249, 10.1016/j.ijplas.2016.01.008
King, 2011, Three-dimensional in situ observations of short fatigue crack growth in magnesium, Acta Mater, 59, 6761, 10.1016/j.actamat.2011.07.034
Peters, 1982, Digital imaging techniques in experimental stress analysis, Opt Eng, 21, 427, 10.1117/12.7972925
Edwards, 2016, Deformation of lamellar TiAl alloys by longitudinal twinning, Scr Mater, 118, 46, 10.1016/j.scriptamat.2016.03.004
Schreier, 2009
Pan, 2010, Recent progress in digital image correlation, Exp Mech, 51, 1223, 10.1007/s11340-010-9418-3
Sutton, 2013, Computer vision-based, noncontacting deformation measurements in mechanics: a generational transformation, Appl Mech Rev, 65, 10.1115/1.4024984
Joo, 2013, Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns, Scr Mater, 68, 245, 10.1016/j.scriptamat.2012.10.025
Edwards, 2017, Stable speckle patterns for nano-scale strain mapping up to 700 oC, Exp Mech, 57, 1469, 10.1007/s11340-017-0317-8
Chang, 2005, Nanoscale in-plane displacement evaluation by AFM scanning and digital image correlation processing, Nanotechnology, 16, 344, 10.1088/0957-4484/16/4/002
Espinos, 2012, Identification of deformation mechanism in abalone shells through AFM and digital image correlation, Procedia IUTAM, 4, 27, 10.1016/j.piutam.2012.05.004
Du, 2016, Plasticity of lath martensite by sliding of substructure boundaries, Scr Mater, 120, 37, 10.1016/j.scriptamat.2016.04.006
Hsu, 2018, Load path change on superelastic NiTi alloys: In situ synchrotron XRD and SEM DIC, Acta Mater, 144, 874, 10.1016/j.actamat.2017.11.035
Wu, 2016, Ultrahigh tensile transformation strains in new Ni50.5Ti36.2Hf13.3 shape memory alloy, Scr Mater, 118, 51, 10.1016/j.scriptamat.2016.03.009
Lee, 2013, Estimating interface bonding strength in clad metals using digital image correlation, Scr Mater, 68, 893, 10.1016/j.scriptamat.2013.02.021
Patriarca, 2016, Slip nucleation in single crystal FeNiCoCrMn high entropy alloy, Scr Mater, 112, 54, 10.1016/j.scriptamat.2015.09.009
Schwartz, 2000
Kalidindi, 2003, How do polycrystalline materials deform plastically?, Adv Mater, 15, 1345, 10.1002/adma.200304953
Wang, 2013, A novel fabrication route to microlaminated TiB2-NiAl composite sheet with {111}<μνω> texture by roll bonding and annealing treatment, Intermetallics, 37, 46, 10.1016/j.intermet.2013.01.020
Zhang, 2017, Bimodal laminated Ti3Al matrix composite achieved by in situ formed Ti5Si3 reinforcements, Mater Sci Eng A, 707, 419, 10.1016/j.msea.2017.09.074
Wright, 2011, A review of strain analysis using electron backscatter diffraction, Microsc Microanal, 17, 316, 10.1017/S1431927611000055
Wilkinson, 2012, Strains, planes, and EBSD in materials science, Mater Today, 15, 366, 10.1016/S1369-7021(12)70163-3
Brisset, 2013, In situ electron backscatter diffraction investigation of recrystallization in a copper wire, Microsc Microanal, 19, 969, 10.1017/S1431927613000299
Takayama, 2018, Chemistry and three-dimensional morphology of martensite-austenite constituent in the bainite structure of low-carbon low-alloy steels, Acta Mater, 145, 154, 10.1016/j.actamat.2017.11.036
Hong, 2011, Strain path dependence of 10–12 twinning activity in a polycrystalline magnesium alloy, Scr Mater, 64, 145, 10.1016/j.scriptamat.2010.09.030
Zeng, 2015, Texture evolution during cold rolling of dilute Mg alloys, Scr Mater, 108, 6, 10.1016/j.scriptamat.2015.06.009
Kahl, 2015, Tensile failure of thin aluminium sheet observed by in-situ EBSD, IOP Conf Ser: Mater Sci Eng, 82, 10.1088/1757-899X/82/1/012095
Nye, 2018, Direct observation of recrystallization mechanisms during annealing of Cu in low and high strain conditions, Scr Mater, 146, 308, 10.1016/j.scriptamat.2017.12.011
Kurosu, 2011, The damage process in a biomedical Co-29Cr-6Mo-0.14N alloy analyzed by X-ray tomography and electron backscattered diffraction, Scr Mater, 64, 367, 10.1016/j.scriptamat.2010.07.032
Wu, 2017, The imaging of failure in structural materials by synchrotron radiation X-ray microtomography, Eng Fract Mech, 182, 127, 10.1016/j.engfracmech.2017.07.027
Basha, 2018, Crack propagation along grain boundaries and twins in Mg and Mg-0.3 at.%Y alloy during in-situ straining in transmission electron microscope, Scr Mater, 142, 50, 10.1016/j.scriptamat.2017.08.023
Kou, 2018, Deformation twinning in response to cracking in Al: an in situ TEM and molecular dynamics study, Scr Mater, 145, 28, 10.1016/j.scriptamat.2017.10.013
Pekin, 2018, In situ nanobeam electron diffraction strain mapping of planar slip in stainless steel, Scr Mater, 146, 87, 10.1016/j.scriptamat.2017.11.005
Kumar, 2007, Crack interaction with microstructure, Mater Today, 10, 34, 10.1016/S1369-7021(07)70207-9
Stock, 2008, Recent advances in X-ray microtomography applied to materials, Int Mater Rev, 53, 129, 10.1179/174328008X277803
Xie, 2015, Latest advances of X-ray imaging and biomedical applications beamline at SSRF, Nucl Sci Tech, 26
Bale, 2012, Real-time quantitative imaging of failure events in materials under load at temperatures above 1600 °C, Nat Mater, 12, 40, 10.1038/nmat3497
Guo, 2018, Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging, Acta Mater, 151, 169, 10.1016/j.actamat.2018.03.036
Landron, 2012, Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography, Scr Mater, 66, 1077, 10.1016/j.scriptamat.2012.03.003
Kostenko, 2012, Three-dimensional morphology of cementite in steel studied by X-ray phase-contrast tomography, Scr Mater, 67, 261, 10.1016/j.scriptamat.2012.04.034
Gamboa, 2014, X-ray microtomography observation of subsurface stress corrosion crack interactions in a pipeline low carbon steel, Scr Mater, 81, 1, 10.1016/j.scriptamat.2014.01.038
Khor, 2006, High resolution X-ray tomography of micromechanisms of fatigue crack closure, Scr Mater, 55, 47, 10.1016/j.scriptamat.2006.01.016
Yang, 2015, Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling, Acta Mater, 92, 8, 10.1016/j.actamat.2015.03.044
Wang, 2012, Growth orientations and morphologies of α-Mg dendrites in Mg-Zn alloys, Scr Mater, 67, 629, 10.1016/j.scriptamat.2012.07.031
Feng, 2018, An in-situ method to estimate the tip temperature and phase selection of secondary Fe-rich intermetallics using synchrotron X-ray radiography, Scr Mater, 149, 44, 10.1016/j.scriptamat.2018.02.001
Shuai, 2018, Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys, Acta Mater, 156, 287, 10.1016/j.actamat.2018.06.026
Kareh, 2014, Pore behaviour during semi-solid alloy compression: insights into defect creation under pressure, Scr Mater, 89, 73, 10.1016/j.scriptamat.2014.06.033
Requena, 2012, Three-dimensional architecture of engineering multiphase metals, Annu Rev Mater Res, 42, 145, 10.1146/annurev-matsci-070511-155109
Leung, 2018, In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing, Nat Commun, 9, 1355, 10.1038/s41467-018-03734-7
Ahmadian, 2015, Three-dimensional X-ray micro-computed tomography of cracks in a furnace cycled air plasma sprayed thermal barrier coating, Scr Mater, 97, 13, 10.1016/j.scriptamat.2014.10.026
Toda, 2003, Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography, Philos Mag, 83, 2429, 10.1080/1478643031000115754
Williams, 2013, Understanding fatigue crack growth in aluminum alloys by in situ X-ray synchrotron tomography, Int J Fatigue, 57, 79, 10.1016/j.ijfatigue.2012.06.009
Dezecot, 2016, In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography, Scr Mater, 113, 254, 10.1016/j.scriptamat.2015.11.017
Chapman, 2015, Characterisation of short fatigue cracks in titanium alloy IMI 834 using X-ray microtomography, Acta Mater, 99, 49, 10.1016/j.actamat.2015.07.069
Lhuissier, 2013, Continuous characterization by X-ray microtomography of damage during high-temperature deformation of magnesium alloy, Scr Mater, 69, 85, 10.1016/j.scriptamat.2013.03.001
Wang, 2016, Atomistic perspective on in situ nanomechanics, Extreme Mech Lett, 8, 127, 10.1016/j.eml.2016.02.006
Sun, 2018, 3D characterization of partially recrystallized Al using high resolution diffraction contrast tomography, Scr Mater, 157, 72, 10.1016/j.scriptamat.2018.08.001
Xu, 2017, Direct observation of nucleation in the bulk of an opaque sample, Sci Rep, 7, 42508, 10.1038/srep42508
Qian, 2017, Statistical study of ductility-dip cracking induced plastic deformation in polycrystalline laser 3D printed Ni-based superalloy, Sci Rep, 7, 2859, 10.1038/s41598-017-03051-x
Cornelius, 2018, Progress of in situ synchrotron X-ray diffraction studies on the mechanical behavior of materials at small scales, Prog Mater Sci, 94, 384, 10.1016/j.pmatsci.2018.01.004
Kou, 2018, A peak position comparison method for high-speed quantitative Laue microdiffraction data processing, Scr Mater, 143, 49, 10.1016/j.scriptamat.2017.09.005
Zhang, 2017, Boundary migration in a 3D deformed microstructure inside an opaque sample, Sci Rep, 7, 4423, 10.1038/s41598-017-04087-9
Cohades, 2014, Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix, Acta Mater, 71, 31, 10.1016/j.actamat.2014.02.043
Marshall, 1985, The mechanics of matrix cracking in brittle-matrix fiber composites, Acta Metall, 33, 2013, 10.1016/0001-6160(85)90124-5
Shaw, 1996, Cracking patterns in metal-ceramic laminates: Effects of plasticity, J Mech Phys Solids, 44, 801, 10.1016/0022-5096(96)00024-5
Bloyer, 1998, Fracture toughness and R-curve behavior of laminated brittle-matrix composites, Metall Mater Trans A, 29, 2483, 10.1007/s11661-998-0220-0
Barabash, 2014, Interphase strain gradients in multilayered steel composite from microdiffraction, Metall Mater Trans A, 45, 98, 10.1007/s11661-013-2100-5
Nambu, 2009, Transition in deformation behavior of martensitic steel during large deformation under uniaxial tensile loading, Scr Mater, 60, 221, 10.1016/j.scriptamat.2008.10.007
Inoue, 2008, Fracture elongation of brittle/ductile multilayered steel composites with a strong interface, Scr Mater, 59, 1055, 10.1016/j.scriptamat.2008.07.020
Suri, 1999, Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an α-β titanium alloy, Acta Mater, 47, 1019, 10.1016/S1359-6454(98)00364-4
Simkin, 2003, A factor to predict microcrack nucleation at γ–γ grain boundaries in TiAl, Scr Mater, 49, 149, 10.1016/S1359-6462(03)00216-1
Weaver, 2018, Slip transmission of high angle grain boundaries in body-centered cubic metals: Micropillar compression of pure Ta single and bi-crystals, Acta Mater, 156, 356, 10.1016/j.actamat.2018.06.046
Yan, 2018, Crystallographic orientation dependent crack nucleation during the compression of a widmannstätten-structure α/β titanium alloy, Scr Mater, 156, 110, 10.1016/j.scriptamat.2018.07.023
Li, 2007, On interface strengthening ability in metallic multilayers, Scr Mater, 57, 117, 10.1016/j.scriptamat.2007.03.032
Guo, 2014, Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates, Acta Mater, 80, 94, 10.1016/j.actamat.2014.07.027
Ke, 2019, Ideal maximum strengths and defect-induced softening in nanocrystalline-nanotwinned metals, Nat Mater, 18, 1207, 10.1038/s41563-019-0484-3
Rao, 2000, Atomistic simulations of dislocation-interface interactions in the Cu-Ni multilayer system, Philos Mag A, 80, 2011, 10.1080/01418610008212148
Zhu, 2008, Understanding nanoscale damage at a crack tip of multilayered metallic composites, Appl Phys Lett, 92, 10.1063/1.2913155
Misra, 2005, Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites, Acta Mater, 53, 4817, 10.1016/j.actamat.2005.06.025
Li, 2010, Investigation of deformation instability of Au/Cu multilayers by indentation, Philos Mag, 90, 3049, 10.1080/14786431003776802
Li, 2009, Two different types of shear-deformation behaviour in Au-Cu multilayers, Philos Mag Lett, 89, 66, 10.1080/09500830802613147
Murr, 2016, Dislocation ledge sources: dispelling the myth of Frank-Read source importance, Metall Mater Trans A, 47, 5811, 10.1007/s11661-015-3286-5
Gao, 1999, Mechanism-based strain gradient plasticity-I, Theory J Mech Phys Solids, 47, 1239, 10.1016/S0022-5096(98)00103-3
Huang, 2000, Mechanism-based strain gradient crystal plasticity-II. Analysis, J Mech Phys Solids, 48, 99, 10.1016/S0022-5096(99)00022-8
Nix, 1998, Indentation size effects in crystalline materials: a law for strain gradient plasticity, J Mech Phys Solids, 46, 411, 10.1016/S0022-5096(97)00086-0
Wu H, Wang Z. Unpublished work; 2020.
Picklum, 2019, MatCALO: Knowledge-enabled machine learning in materials science, Comput Mater Sci, 163, 50, 10.1016/j.commatsci.2019.03.005
Yi Wang, 2019, Integrated computational materials engineering for advanced materials: a brief review, Comput Mater Sci, 158, 42, 10.1016/j.commatsci.2018.11.001
Zhang, 2015, Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn, Int J Plast, 69, 21, 10.1016/j.ijplas.2015.01.003
Kang, 2019, Pushing the frontiers of modeling excited electronic states and dynamics to accelerate materials engineering and design, Comput Mater Sci, 160, 207, 10.1016/j.commatsci.2019.01.004
Gu, 2017, Multiscale modeling of the elastic behavior of architectured and nanostructured Cu-Nb composite wires, Int J Solids Struct, 121, 148, 10.1016/j.ijsolstr.2017.05.022
Mohan, 2019, Experimental and modelling studies for solidification of undercooled Ni-Fe-Si alloys, Philos Trans R Soc A, 377, 20180208, 10.1098/rsta.2018.0208
Prima, 2006, Evidence of α-nanophase heterogeneous nucleation from ω particles in a β-metastable Ti-based alloy by high-resolution electron microscopy, Scr Mater, 54, 645, 10.1016/j.scriptamat.2005.10.024
Cho, 2002, Intergranular strain accumulation in a near-alpha titanium alloy during plastic deformation, Acta Mater, 50, 4847, 10.1016/S1359-6454(02)00354-3
Stapleton, 2008, Evolution of lattice strain in Ti-6Al-4V during tensile loading at room temperature, Acta Mater, 56, 6186, 10.1016/j.actamat.2008.08.030
Erdely, 2018, Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy, Acta Mater, 158, 193, 10.1016/j.actamat.2018.07.062
Basu, 2018, BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys, Acta Mater, 157, 83, 10.1016/j.actamat.2018.07.031
Zhu, 2017, Microstructures-based constitutive analysis for mechanical properties of gradient-nanostructured 304 stainless steels, Acta Mater, 128, 375, 10.1016/j.actamat.2017.02.035
Hsia, 1994, Cleavage due to dislocation confinement in layered materials, J Mech Phys Solids, 42, 877, 10.1016/0022-5096(94)90076-0
Guo, 2018, Cleavage cracking of ductile-metal substrates induced by brittle coating fracture, Acta Mater, 152, 77, 10.1016/j.actamat.2018.04.017
Guo, 2015, Brittle film-induced cracking of ductile substrates, Acta Mater, 99, 273, 10.1016/j.actamat.2015.07.059
Liu, 2011, Delaying premature local necking of high-strength Cu: A potential way to enhance plasticity, Scr Mater, 64, 13, 10.1016/j.scriptamat.2010.08.049
Jeong, 2013, Evaluation of layer interaction using layer thickness and plastic zone size of multilayered metallic sheets, Mod Phys Lett B, 27, 1350069, 10.1142/S0217984913500693
Nambu, 2009, Effect of interfacial bonding strength on tensile ductility of multilayered steel composites, Compos Sci Technol, 69, 1936, 10.1016/j.compscitech.2009.04.013
Syn, 1993, Layer thickness effect on ductile tensile fracture of ultrahigh carbon steel-brass laminates, Metall Trans A, 24, 1647, 10.1007/BF02646603
Liu, 2017, The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status, Mater Sci Eng A, 679, 172, 10.1016/j.msea.2016.10.033
He, 2011, In situ transmission electron microscopy study of alpha-brass nanoligament formation, microstructure evolution and fracture, Scr Mater, 65, 444, 10.1016/j.scriptamat.2011.05.032
Wu, 2016, Enhanced fracture toughness of TiBw/Ti3Al composites with a layered reinforcement distribution, Mater Sci Eng A, 670, 233, 10.1016/j.msea.2016.06.026
Wu, 2019, On the enhanced deformability of brittle intermetallics through the design of heterogeneous multi-layered structure, Metall Mater Trans A, 50, 5561, 10.1007/s11661-019-05477-6
Pippan, 2016, The importance of fracture toughness in ultrafine and nanocrystalline bulk materials, Mater Res Lett, 4, 127, 10.1080/21663831.2016.1166403
Bao, 2004, On fracture locus in the equivalent strain and stress triaxiality space, Int J Mech Sci, 46, 81, 10.1016/j.ijmecsci.2004.02.006
Zhu, 2010, Scale-dependent fracture mode in Cu-Ni laminate composites, Philos Mag Lett, 90, 413, 10.1080/09500831003745241
Gruber, 2016, Evidence for bulk ripplocations in layered solids, Sci Rep, 6, 33451, 10.1038/srep33451
Anderson, 2004
Ravi Chandran, 2017, New approach for the correlation of fatigue crack growth in metals on the basis of the change in net-section strain energy, Acta Mater, 129, 439, 10.1016/j.actamat.2017.03.011
Rohatgi, 2003, Resistance-curve and fracture behavior of Ti-Al3Ti metallic-intermetallic laminate (MIL) composites, Acta Mater, 51, 2933, 10.1016/S1359-6454(03)00108-3
Huang, 1995, The role of metal plasticity and interfacial strength in the cracking of metal/ceramic laminates, Acta Metall Mater, 43, 1523, 10.1016/0956-7151(94)00341-E
Hull, 2011
Launey, 2009, On the fracture toughness of advanced materials, Adv Mater, 21, 2103, 10.1002/adma.200803322
Clemens, 2013, Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys, Adv Eng Mater, 15, 191, 10.1002/adem.201200231
Palomares-García, 2017, Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression, Acta Mater, 123, 102, 10.1016/j.actamat.2016.10.034
Cui, 2012, Fabrication of fully dense TiAl-based composite sheets with a novel microlaminated microstructure, Scr Mater, 66, 276, 10.1016/j.scriptamat.2011.11.009
Palomares-García, 2017, Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy, Scr Mater, 139, 17, 10.1016/j.scriptamat.2017.06.002
Dimiduk, 1998, The role of grain size and selected microstructural parameters in strengthening fully lamellar TiAl alloys, Metall Mater Trans A, 29, 37, 10.1007/s11661-998-0157-3
Kothari, 2012, Advances in gamma titanium aluminides and their manufacturing techniques, Prog Aerosp Sci, 55, 1, 10.1016/j.paerosci.2012.04.001
Li, 2017, Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance, Int J Plast, 88, 53, 10.1016/j.ijplas.2016.09.012
Cameron, 2018, Phase stability effects on hydrogen embrittlement resistance in martensite-reverted austenite steels, Metall Mater Trans A, 50, 29, 10.1007/s11661-018-4948-x
Martin, 2019, Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials, Acta Mater, 165, 734, 10.1016/j.actamat.2018.12.014
Shimizu, 2019, Local deformation and fracture behavior of high-strength aluminum alloys under hydrogen influence, Metall Mater Trans A, 51, 1, 10.1007/s11661-019-05304-y
Wan, 2018, Hydrogen embrittlement effect observed by in-situ hydrogen plasma charging on a ferritic alloy, Scr Mater, 151, 24, 10.1016/j.scriptamat.2018.03.038
Song, 2011, A nanoscale mechanism of hydrogen embrittlement in metals, Acta Mater, 59, 1557, 10.1016/j.actamat.2010.11.019
Tuğluca, 2019, Lowering strain rate simultaneously enhances carbon- and hydrogen-induced mechanical degradation in an Fe-33Mn-1.1C steel, Metall Mater Trans A, 50, 1137, 10.1007/s11661-018-5080-7
Abdolvand, 2019, Progressive modelling and experimentation of hydrogen diffusion and precipitation in anisotropic polycrystals, Int J Plast, 116, 39, 10.1016/j.ijplas.2018.12.005
Zhu, 2017, Study on interactions of an edge dislocation with vacancy-H complex by atomistic modelling, Int J Plast, 92, 31, 10.1016/j.ijplas.2017.03.003
Singaravelu, 2019, 3D time-resolved observations of fatigue crack initiation and growth from corrosion pits in Al 7xxx alloys using in situ synchrotron X-ray tomography, Metall Mater Trans A, 51, 28, 10.1007/s11661-019-05519-z
Revil-Baudard, 2018, Effect of the yield stresses in uniaxial tension and pure shear on the size of the plastic zone near a crack, Int J Plast, 102, 101, 10.1016/j.ijplas.2017.12.006
Askarinejad, 2018, Mechanics of bioinspired lamellar structured ceramic/polymer composites: experiments and models, Int J Plast, 107, 122, 10.1016/j.ijplas.2018.04.001
Zhu, 2018, Ductility and plasticity of nanostructured metals: differences and issues, Mater Today Nano, 2, 15, 10.1016/j.mtnano.2018.09.004
Lipsitt, 1980, The deformation and fracture of Ti3Al at elevated temperatures, Metall Trans A, 11A, 1369, 10.1007/BF02653491
Gao, 2003, Materials become insensitive to flaws at nanoscale: lessons from nature, Proc Natl Acad Sci USA, 100, 5597, 10.1073/pnas.0631609100
Guelton, 2020, Microstructure-property relationship in cold-drawn pearlitic steel wires, Metall Mater Trans A
Brust, 2019, Characterization of martensite orientation relationships in steels and ferrous alloys from EBSD data using Bayesian inference, Metall Mater Trans A, 51, 142, 10.1007/s11661-019-05514-4
Enomoto, 2019, Simulation of austenite formation during continuous heating from low carbon martensite with poly-dispersed cementite, Metall Mater Trans A, 51, 618, 10.1007/s11661-019-05569-3
Dalton, 2019, Low-temperature nitridation of 2205 duplex stainless steel, Metall Mater Trans A, 51, 608, 10.1007/s11661-019-05553-x
Li, 2019, Low-temperature oxy-nitriding of AISI 304 austenitic stainless steel for combat corrosion and wear in HCl medium, Metall Mater Trans A, 51, 419, 10.1007/s11661-019-05521-5
Günen, 2019, Properties and high temperature dry sliding wear behavior of boronized Inconel 718, Metall Mater Trans A, 51, 927, 10.1007/s11661-019-05577-3
Cao, 2019, Predicting surface deformation during mechanical attrition of metallic alloys, npj Comput Mater, 5, 36, 10.1038/s41524-019-0171-6
Sun, 2019, Long distance chemical gradient induced by surface nanocrystallization, Appl Mater Today, 14, 137, 10.1016/j.apmt.2018.12.002
Strubbia, 2019, Fatigue life improvement in lean duplex stainless steel by peening treatments, Metall Mater Trans A, 50, 5614, 10.1007/s11661-019-05455-y
Lin, 2019, Investigation on the effect of shot peening coverage on the surface integrity, Appl Surf Sci, 489, 66, 10.1016/j.apsusc.2019.05.281
Huang, 2015, Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer, Acta Mater, 87, 150, 10.1016/j.actamat.2014.12.057
Speer, 2011, Analysis of microstructure evolution in quenching and partitioning automotive sheet steel, Metall Mater Trans A, 42, 3591, 10.1007/s11661-011-0869-7
Liu, 2019, Large plasticity in magnesium mediated by pyramidal dislocations, Science, 365, 73, 10.1126/science.aaw2843
Bu, 2019, Nonbasal slip systems enable a strong and ductile hexagonal-close-packed high-entropy phase, Phys Rev Lett, 122, 10.1103/PhysRevLett.122.075502
Hirsch, 2013, Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications, Acta Mater, 61, 818, 10.1016/j.actamat.2012.10.044
Williams, 2003, Progress in structural materials for aerospace systems, Acta Mater, 51, 5775, 10.1016/j.actamat.2003.08.023
Larsen, 1995, An evaluation of fiber-reinforced titanium matrix composites for advanced high-temperature aerospace application, Metall Mater Trans A, 26, 3211, 10.1007/BF02669450
Kwok, 2016, Developments in laser-based surface engineering processes: with particular reference to protection against cavitation erosion, Surf Coat Technol, 291, 189, 10.1016/j.surfcoat.2016.02.019
Quazi, 2015, Laser-based surface modifications of aluminum and its alloys, Crit Rev Solid State Mater Sci, 41, 106, 10.1080/10408436.2015.1076716
Singh, 2012, Laser surface engineering of magnesium alloys: a review, JOM, 64, 716, 10.1007/s11837-012-0340-2
Wallstabe, 2012, Laser-assisted surface modification of alumina and its tribological behavior, J Mater Eng Perform, 22, 223, 10.1007/s11665-012-0215-2
Liang, 2018, Improving corrosion resistance and corrosive wear resistance of aluminum alloy drill pipe by surface nanocrystallization and micro-arc oxidation, J Mater Eng Perform, 27, 4462, 10.1007/s11665-018-3529-x
Ma, 2017, Improving surface finish and wear resistance of additive manufactured nickel-titanium by ultrasonic nano-crystal surface modification, J Mater Process Technol, 249, 433, 10.1016/j.jmatprotec.2017.06.038
Węglowski, 2016, Electron beam welding – techniques and trends – review, Vacuum, 130, 72, 10.1016/j.vacuum.2016.05.004
Gao, 2011, Experimental investigation and fatigue life prediction for 7475–T7351 aluminum alloy with and without shot peening-induced residual stresses, Acta Mater, 59, 3737, 10.1016/j.actamat.2011.03.013
Oguri, 2011, Fatigue life enhancement of aluminum alloy for aircraft by Fine Particle Shot Peening (FPSP), J Mater Process Technol, 211, 1395, 10.1016/j.jmatprotec.2011.03.011