An investigation on the tribological properties of nano-tungsten carbide coating by ESD

Ciubotariu, 2022, Investigations of cavitation erosion and corrosion behavior of flame-sprayed NiCrBSi/WC-12Co composite coatings, Materials, 15, 2943, 10.3390/ma15082943 Kheifetz, 2019, Technological control of the heredity of operational quality parameters in the engine camshaft recovery, Adv. Mater. Technol., 1 Lopez-Heredia, 2007, An electrodeposition method of calcium phosphate coatings on titanium alloy, J. Mater. Sci. Mater. Med., 18, 381, 10.1007/s10856-006-0703-8 Napłoszek-Bilnik, 2005, Electrodeposition of composite Ni-based coatings with the addition of Ti or/and Al particles, Thin Solid Films, 474, 146, 10.1016/j.tsf.2004.08.175 Karbasi, 2013, Synthesis, characterization and optimization of nanostructured Fe-Ni coatings by electrodeposition method, Prot. Met. Phys. Chem. Surf., 49, 548, 10.1134/S2070205113050134 Wachowicz, 2021, The analysis of erosive wear resistance of WC-Co carbides obtained by spark plasma sintering method, Materials, 14, 7326, 10.3390/ma14237326 Wohaibi, 2019, Tribological characterization of micron-/nano-sized WC-9% Co cemented carbides prepared by spark plasma sintering at elevated temperatures, Materials, 12, 920, 10.3390/ma12060920 Casati, 2014, Metal matrix composites reinforced by nano-particles—a review, Metals, 4, 65, 10.3390/met4010065 Gao, 2019, Simultaneous increase of friction coefficient and wear resistance through HVOF sprayed WC-(nano WC-Co), Surf. Coat. Technol., 363, 379, 10.1016/j.surfcoat.2019.02.042 Chen, 2010, Research on the friction and wear behavior at elevated temperature of plasma-sprayed nanostructured WC-Co coatings, J. Mater. Eng. Perform., 19, 1, 10.1007/s11665-009-9411-0 Yin, 2010, Microsliding wear behaviour of HVOF sprayed conventional and nanostructured WC–12Co coatings at elevated temperatures, Surf. Eng., 26, 469, 10.1179/026708410X12506870724352 Levashov, 2007, Materials science and technological aspects of electrospark deposition of nanostructured WC‐Co coatings onto titanium substrates, Plasma Process. Polym., 4, 293, 10.1002/ppap.200600148 Wang, 2009, Characterization and wear behavior of WC-0.8 Co coating on cast steel rolls by electro-spark deposition, Int. J. Miner., Metall. Mater., 16, 707 Alexander, 2012, Influence of carbon content of WC-Co electrode materials on the wear resistance of electrospark coatings, J. Surf. Eng. Mater. Adv. Technol., 2012 Yetim, 2022, Synthesis and characterization of wear and corrosion resistant Ni-doped Al2O3 nanocomposite ceramic coatings by sol-gel method, Surf. Coat. Technol., 444, 10.1016/j.surfcoat.2022.128659 Tekdir, 2021, Additive manufacturing of multiple layered materials (Ti6Al4V/316L) and improving their tribological properties with glow discharge surface modification, Vacuum, 184, 10.1016/j.vacuum.2020.109893 Fu, 2011, Tribological properties of copper-iron based POWDER metallurgy materials under different tribological conditions, Nonferrous Met. Eng., 63, 32 Liu, 2019, Dynamic changes of mechanical properties induced by friction in the Archard wear model, Wear, 428, 366, 10.1016/j.wear.2019.04.004 Straffelini, 2004, Influence of load and temperature on the dry sliding behaviour of Al-based metal-matrix-composites against friction material, Wear, 256, 754, 10.1016/S0043-1648(03)00529-5 Liang, 2015, Study on friction and wear properties of powder metallurgy sinter hardening cam material, Power Metall. Technol., 33, 83