An integrated entropy-based multi-attribute decision-making model for phase change material selection and passive thermal management

Rugh, 2004, Significant fuel savings and emission reductions by improving vehicle air conditioning, Mob. Air Cond. Summit Chen, 2012 Clodic, 2006, Mobile air conditioning - IPCC/TEAP special report: Safeguarding the ozone layer and the global climate system, 295 Jeya Girubha, 2012, Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component, Mater. Des., 37, 478, 10.1016/j.matdes.2012.01.022 Socaciu, 2016 Shanian, 2006, Topsis multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell, J. Power Sources, 159, 1095, 10.1016/j.jpowsour.2005.12.092 Akeiber, 2016, A review on phase change material (PCM) for sustainable passive cooling in building envelopes, Renew. Sustain. Energy Rev., 60, 1470, 10.1016/j.rser.2016.03.036 Saikia, 2018, Thermal performance evaluation of building roofs embedded PCM for multi-climatic zones, Green Energy Technol., 401, 10.1007/978-981-10-7188-1_18 Tariq, 2020, Thermal applications of hybrid phase change materials: A critical review, Therm. Sci., 24, 2151, 10.2298/TSCI190302112T Qureshi, 2018, Recent advances on thermal conductivity enhancement of phase change materials for energy storage system: A review, Int. J. Heat Mass Transfer, 127, 838, 10.1016/j.ijheatmasstransfer.2018.08.049 Putra, 2020, Performance of beeswax phase change material (PCM) and heat pipe as passive battery cooling system for electric vehicles, Case Stud. Therm. Eng., 21 Jaguemont, 2018, Phase-change materials (PCM) for automotive applications: A review, Appl. Therm. Eng., 132, 308, 10.1016/j.applthermaleng.2017.12.097 Saleel, 2019, Coconut oil as phase change material to maintain thermal comfort in passenger vehicles: An experimental analysis, J. Therm. Anal. Calorim., 136, 629, 10.1007/s10973-018-7676-y Sood, 2021, Numerical analysis of an automobile cabin thermal management using passive phase change material, Therm. Sci. Eng. Prog., 10.1016/j.tsep.2021.100870 Afzal, 2020, Human thermal comfort in passenger vehicles using an organic phase change material– an experimental investigation, neural network modelling, and optimization, Build. Environ., 180 Yu, 2021, Sensitivity analysis of thermophysical properties on PCM selection under steady and fluctuating heat sources: A comparative study, Appl. Therm. Eng., 186 Arıcı, 2020, Pcm integrated to external building walls: An optimization study on maximum activation of latent heat, Appl. Therm. Eng., 165 Sharma, 2009, Review on thermal energy storage with phase change materials and applications, Renew. Sustain. Energy Rev., 13, 318, 10.1016/j.rser.2007.10.005 Cavallini, 2013, Integral aided method for material selection based on quality function deployment and comprehensive VIKOR algorithm, Mater. Des., 47, 27, 10.1016/j.matdes.2012.12.009 Emovon, 2020, Application of MCDM method in material selection for optimal design: A review, Results Mater., 7 Mousavi-Nasab, 2017, A comprehensive MCDM-based approach using TOPSIS, COPRAS and DEA as an auxiliary tool for material selection problems, Mater. Des., 121, 237, 10.1016/j.matdes.2017.02.041 Xu, 2017, Selection of phase change material for thermal energy storage in solar air conditioning systems, Energy Procedia, 105, 4281, 10.1016/j.egypro.2017.03.898 Dutta, 2021, An evolutionary strategic weight manipulation approach for multi-attribute decision making: TOPSIS method, Internat. J. Approx. Reason., 129, 64, 10.1016/j.ijar.2020.11.004 Rastogi, 2015, Selection and performance assessment of phase change materials for heating, ventilation and air-conditioning applications, Energy Convers. Manage., 89, 260, 10.1016/j.enconman.2014.09.077 Llamazares, 2019, Using interval weights in MADM problems, Comput. Ind. Eng., 136, 345, 10.1016/j.cie.2019.07.035 Rathod, 2011, A methodological concept for phase change material selection based on multiple criteria decision analysis with and without fuzzy environment, Mater. Des., 32, 3578, 10.1016/j.matdes.2011.02.040 Sakundarini, 2013 Saikia, 2021, Energy performance and indoor airflow analysis of a healthcare ward designed with resource conservation objectives, J. Build. Eng., 10.1016/j.jobe.2021.103296 Cavallo, 2019, Comparing inconsistency of pairwise comparison matrices depending on entries, J. Oper. Res. Soc., 70, 842, 10.1080/01605682.2018.1464427 Nadeem, 2020, Phase change materials ranking by using the analytic hierarchy process, 1 Ganesh Kumar, 2021, Selection of optimum glazing material for solar thermal applications using TOPSIS methodology, Int. J. Ambient Energy, 42, 274, 10.1080/01430750.2018.1542626 Anilkumar, 2021, Optimum selection of phase change material for solar box cooker integrated with thermal energy storage unit using multi-criteria decision-making technique, J. Energy Storage, 40 Mukhamet, 2021, Ranking PCMs for building façade applications using multi-criteria decision-making tools combined with energy simulations, Energy, 215, 10.1016/j.energy.2020.119102 Shen, 2021, Physics-guided multi-objective mixture optimization for functional cementitious composites containing microencapsulated phase changing materials, Mater. Des., 207, 10.1016/j.matdes.2021.109842 Yousefi, 2021, Design parameters of a double-slope solar still: Modelling, sensitivity analysis, and optimization, Energies, 14 Kumar, 2021, Selection of phase-change material for thermal management of electronic devices using multi-attribute decision-making technique, Int. J. Energy Res., 45, 2023, 10.1002/er.5896 Zhang, 2015, Topsis method based on entropy weight for supplier evaluation of power grid enterprise, 334 Barreneche, 2015, New database to select phase change materials: Chemical nature, J. Energy Storage, 3, 18, 10.1016/j.est.2015.08.003 Bhatti, 1999, Riding in comfort, part II: Evolution of automotive air conditioning, ASHRAE J., 41, 44 El Khoury, 2005 Lee, 2013, 1 Jankowski, 2014, A review of phase change materials for vehicle component thermal buffering, 1525 Crespo, 2019, Latent thermal energy storage for solar process heat applications at medium-high temperatures – a review, Sol. Energy, 192, 3, 10.1016/j.solener.2018.06.101 Johnson’s, 2014 Waqas, 2013, Phase change material (PCM) storage for free cooling of buildings - A review, Renew. Sustain. Energy Rev., 18, 607, 10.1016/j.rser.2012.10.034 Beltrán, 2017, Effect of environment on the selection of phase change materials for building wallboards using multi-criteria decision methods and building energy simulations, 1359 Yang, 2018, A methodological concept for phase change material selection based on multi-criteria decision making (MCDM): A case study, Energy, 165, 1085, 10.1016/j.energy.2018.10.022 Odu, 2019, Weighting methods for multi-criteria decision making technique, J. Appl. Sci. Environ. Manag., 23, 1449