An improved Finite Fracture Mechanics approach to blunt V-notch brittle fracture mechanics: Experimental verification on ceramic, metallic, and plastic materials
Tóm tắt
Từ khóa
Tài liệu tham khảo
Gomez, 2004, A fracture criterion for blunted V-notched samples, Int. J. Fract., 127, 239, 10.1023/B:FRAC.0000036832.29429.21
Taylor, 2004, Predicting the fracture strength of ceramic materials using the theory of critical distances, Eng. Fract. Mech., 71, 2407, 10.1016/j.engfracmech.2004.01.002
Pugno, 2004, Predictions of strength in MEMS components width defects – a novel experimental theoretical approach, Int. J. Solids Struct., 42, 647, 10.1016/j.ijsolstr.2004.06.026
Lazzarin, 2005, Some expressions for the strain energy in a finite volume surrounding the root of blunted V-notches, Int. J. Fract., 135, 161, 10.1007/s10704-005-3943-6
Gomez, 2006, Failure criteria for linear elastic materials with U-notches, Int. J. Fract., 141, 99, 10.1007/s10704-006-0066-7
Ayatollahi, 2010, Brittle fracture in rounded-tip V-shaped notches, Mater. Des., 31, 60, 10.1016/j.matdes.2009.07.017
Barati, 2012, A notch root radius to attain minimum fracture loads in plates weakened by U-notches under mode I loading, Sci. Iran., 19, 491, 10.1016/j.scient.2012.04.010
Leguillon, 2003, Crack onset at a V-notch: influence of the notch tip radius, Int. J. Fract., 122, 1, 10.1023/B:FRAC.0000005372.68959.1d
Yosibash, 2004, Failure criteria for brittle elastic materials, Int. J. Fract., 125, 307, 10.1023/B:FRAC.0000022244.31825.3b
Picard, 2006, A method to estimate the influence of the notch-root radius on the fracture toughness of ceramics, J. Eur. Ceram. Soc., 26, 1421, 10.1016/j.jeurceramsoc.2005.02.016
Carpinteri, 2011, Brittle failures at rounded V-notches: a finite fracture mechanics approach, Int. J. Fract., 172, 1, 10.1007/s10704-011-9640-8
Carpinteri, 2012, A finite fracture mechanics approach to the asymptotic behavior of U-notched structures, Fatigue Fract. Eng. Mater. Struct., 35, 451, 10.1111/j.1460-2695.2011.01637.x
Carpinteri, 2008, A finite fracture mechanics approach to structures with sharp V-notches, Eng. Fract. Mech., 75, 1736, 10.1016/j.engfracmech.2007.04.010
Filippi, 2002, Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates, Int. J. Solid Struct., 39, 4543, 10.1016/S0020-7683(02)00342-6
Lukas, 1987, Stress intensity factor for small notch-emanated cracks, Eng. Fract. Mech., 26, 471, 10.1016/0013-7944(87)90027-0
Xu, 1995, Practical stress expressions for stress concentration regions, Fatigue Fract. Eng. Mater. Struct., 22, 885, 10.1111/j.1460-2695.1995.tb00912.x
Sapora, 2014, Cracks at rounded V-notch tips: an analytical expression for the stress intensity factor, Int. J. Fract., 187, 285, 10.1007/s10704-014-9932-x
Roberti, 1978, The influence of high temperature austenitization on the toughness properties of as-quenched AISI 4340 steel, Metall. Ital., 70, 449
Firrao, 1982, The influence of notch root radius and austenitizing temperature on fracture appearance of as-quenched Charpy-V type AISI 4340 steel specimens, Metall. Trans. A, 13A, 1003, 10.1007/BF02643397
Tsuji, 1999, An investigation into the location of crack initiation sites in alumina, polycarbonate and mild steel, Fatigue Fract. Eng. Mater. Struct., 22, 509, 10.1046/j.1460-2695.1999.00181.x
Cornetti, 2006, Finite fracture mechanics: a coupled stress and energy failure criterion, Eng. Fract. Mech., 73, 2021, 10.1016/j.engfracmech.2006.03.010
Carpinteri, 2009, Generalized fracture toughness for specimens with re-entrant corners: experiments vs. theoretical predictions, Struct. Eng. Mech., 32, 609, 10.12989/sem.2009.32.5.609
Susmel, 2008, On the use of the theory of critical distances to predict static failures in ductile metallic materials containing different geometrical features, Eng. Fract. Mech., 75, 4410, 10.1016/j.engfracmech.2008.04.018
Taylor, 2005, The fracture mechanics of finite crack extension, Eng. Fract. Mech., 72, 1021, 10.1016/j.engfracmech.2004.07.001
Ayatollahi, 2011, Mixed mode brittle fracture of sharp and blunt V-notches in polycristalline graphite, Carbon, 49, 2465, 10.1016/j.carbon.2011.02.015
Berto, 2012, Brittle fracture of U-notched graphite plates under mixed mode loading, Mater. Des., 41, 421, 10.1016/j.matdes.2012.05.022
Priel, 2008, Failure initiation at a blunt V-notch tip under mixed mode loading, Int. J. Fract., 149, 143, 10.1007/s10704-008-9234-2