An experimental and numerical investigation of adhesive bonding strengths of polymer materials

Hutchinson, 1992, Mixed mode cracking in layered materials, Adv Appl Mech, 29, 63, 10.1016/S0065-2156(08)70164-9 Xu, 2002, Impact failure characteristics of sandwich structures; Part II, Int J Solids Struct, 39, 4237, 10.1016/S0020-7683(02)00246-9 Needleman, 1999, The effect of bond strength and loading rate on the conditions governing the attainment of intersonic crack growth along interfaces, J Mech Phys Solids, 47, 2411, 10.1016/S0022-5096(99)00012-5 Bogy, 1971, Two edge-bonded elastic wedges of different materials and wedge angles under surface traction, J Appl Mech, 38, 377, 10.1115/1.3408786 Reedy, 1993, Comparison of butt tensile strength data with interface corner stress intensity factor prediction, Int J Solids Struct, 30, 2929, 10.1016/0020-7683(93)90204-K Xu LR, Sengupta S, Kuai H. Convex interfacial joints with least stress singularities in dissimilar materials and structures. Submitted for publication. Xu, 2003, Dynamic crack deflection and penetration at interfaces in homogeneous materials, J Mech Phys Solids, 51, 425 Rosakis, 1998, Intersonic crack propagation in bimaterial systems, J Mech Phys Solids, 46, 1789, 10.1016/S0022-5096(98)00036-2 Singh, 1996, Subsonic and intersonic crack growth along a bimaterial interface, J Appl Mech, 63, 919, 10.1115/1.2787247 Ho, 1993, Numerical analysis of the Iosipescu specimen for composite materials, Comput Sci Technol, 46, 115, 10.1016/0266-3538(93)90167-F Kumosa, 1999, Non-linear finite-element analysis of Iosipescu specimens, Compos Sci Technol, 59, 561, 10.1016/S0266-3538(98)00104-3 Walrath, 1983, The Iosipescu shear test as applied to composite materials, Exp Mech, 23, 105, 10.1007/BF02328688 Sullivan, 1988, The use of Iosipescu specimens, Exp Mech, 28, 326, 10.1007/BF02329031 Sukumar, 1993, Finite element analysis of axial splits in composite Iosipescu specimens, Int J Fract, 62, 55, 10.1007/BF00032525 Bansal, 1998, Analysis of double edge-cracked Iosipescu specimens under biaxial loads, Eng Fract Mech, 59, 89, 10.1016/S0013-7944(97)00063-5 D’Almeida, 1999, The Iosipescu test method as a method to evaluate the tensile strength of brittle materials, Polym Testing, 18, 407, 10.1016/S0142-9418(98)00043-9 Sullivan, 1989, Shear properties and a stress analysis obtained from vinyl–ester Iosipescu specimens, Exp Mech, 24, 223, 10.1007/BF02323169 Ikegami, 1996, Benchmark tests on adhesive strengths in butt, single and double lap joints and double-cantilever beams, Int J Adhesion Adhes, 16, 219, 10.1016/0143-7496(95)00051-8 Schuller, 2002, Measuring the interfacial transverse strength, Int J Adhesion Adhes, 22, 169, 10.1016/S0143-7496(01)00051-3 Chen, 2000, The effect of the T-stress on crack path selection in adhesively bonded joints, Int J Adhesion Adhes, 21, 357, 10.1016/S0143-7496(01)00011-2